A color masterbatch assistance system for optimizing product color by masterbatch addition in injection molding of post-industrial recyclates

References

Agoston, G.A. (1987). Color Theory and its Application in Art and design, 19th ed. Springer-Verlag Berlin Heidelberg GmbH: New York.10.1007/978-3-540-34734-7Suche in Google Scholar

Aigner, M., Lepschi, A., Aigner, J., Garmendia, I., and Miethlinger, J. (2015). Experimental study and verification of the residence time distribution using fluorescence spectroscopy and color measurement. AIP Conf. Proc. 1664: 100005, https://doi.org/10.1063/1.4918472.Suche in Google Scholar

Al-Salem, S.M., Lettieri, P., and Baeyens, P. (2009). Recycling and recovery routes of plastic solid waste(PSW): a review. Waste Manage. 29: 2625–2643, https://doi.org/10.1016/j.wasman.2009.06.004.Suche in Google Scholar PubMed

Alvarado Chacon, F., Brouwer, M.T., Thoden van Velzen, E.U., and Smeding, I.W. (2020). A first assessment of the impact of impurities in PP and PE recycled plastics, 2030. Wageningen Food & Biobased Research, Wageningen, Netherlands.Suche in Google Scholar

Balcı, O. and Tuğrul Oğulata, R. (2009). Prediction of the changes on the CIELab values of fabric after chemical finishing using artificial neural network and linear regression models. Fibers and Polym. 10: 374–393, https://doi.org/10.1007/s12221-009-0384-2.Suche in Google Scholar

Bassi, S.A., Boldrin, A., Faraca, G., and Astrup, T.F. (2020). Extended producer responsibility: how to unlock the environmental and economic potential of plastic packaging waste? Resour. Conserv. Recycl. 162: 105030, https://doi.org/10.1016/j.resconrec.2020.105030.Suche in Google Scholar

Bastian, M. (2010). Einfärben von Kunststoffen. Hanser Publisher, Munich.10.3139/9783446425774.fmSuche in Google Scholar

Baur, E., Brinkmann, S., Osswald, T.A., Rudolph, N., and Schmachtenberg, E. (2013). Saechtling Kunststoff Taschenbuch, 31st ed. Hanser Publisher, Munich.10.3139/9783446437296.fmSuche in Google Scholar

Borealis. Product data sheet, https://www.borealisgroup.com/products/productcatalogue/bj998mo (Accessed 07 Jun 2024).Suche in Google Scholar

Botos, J., Murail, N., Heidemeyer, P., Kretschmer, K., Ulmer, B., Zentgraf, T., Bastian, M., and Hochrein, T. (2014). Color measurement of plastics – from compounding via pelletizing, up to injection molding and extrusion. In: The 29th international conference of the polymer processing society – Conference papers, Vol. 1593. AIP Publishing (American Institute of Physics), Melville, New York, p. 16, Available at: https://pubs.aip.org/aip/acp/article/1593/1/16/694643/Color-measurement-of-plastics-From-compounding-via.10.1063/1.4873725Suche in Google Scholar

Chappell, B., Pramanik, A., Basak, A.K., Sarker, P.K., Prakash, C., Debnath, S., and Shankar, S. (2022). Processing household plastics for recycling – a review. Cleaner Mater. 6: 100158, https://doi.org/10.1016/j.clema.2022.100158.Suche in Google Scholar

Che, J., Lib, R., and Senanayakea, M. (2016). A comparative study of the dependency of colour measurement on surface temperature. Color. Technol 132: 144–152, https://doi.org/10.1111/cote.12202.Suche in Google Scholar

Chung, C.N., Marschik, C., Akhras, M.H., Höftberger, T., Burgstaller, C., and Steinbichler, G. (2024). An experimental validation of diffusion-based devolatilization models in extruders using postindustrial and post-consumer plastic waste. Int. Polym. Proc. 39: 453–464, https://doi.org/10.1515/ipp-2024-0011.Suche in Google Scholar

Commission Internationale de l’Éclairage (1931). CIE 1931 color space. CIE Standard, Vienna, Austria.Suche in Google Scholar

Dusunceli, N. and Colak, O.U. (2008). Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers. Int. J. Plast. 24: 1224–1242, https://doi.org/10.1016/j.ijplas.2007.09.003.Suche in Google Scholar

Garofalo, E., Taurino, L., Di Maio, L., Neitzert, H.C., and Incarnato, L. (2023). Assessment of melt compounding with zeolites as an effective deodorization strategy for mixed plastic wastes and comparison with degassing. Polymers 15: 1858, https://doi.org/10.3390/polym15081858.Suche in Google Scholar PubMed PubMed Central

German Institute for Standardization (2017). Colorimetry – Part 1: Basic terms of colorimetry. German Institute for Standardization (DIN), Beuth Verlag GmbH, Berlin, DIN 5033-1.Suche in Google Scholar

Gorji Bandpay, M., Ameri, F., Ansari, K., and Moradian, S. (2018). Mathematical and empirical evaluation of accuracy of the Kubelka–Munk model for color match prediction of opaque and translucent surface coatings. J. Coat. Technol. Res. 15: 1117–1131, https://doi.org/10.1007/s11998-018-0056-5.Suche in Google Scholar

Hiltunen, J., Silfsten, P., Jaaskelainen, T., and Parkkinen, J.P.S. (2002). A qualitative description of thermochromism in color measurements. Color Res. Appl. 27: 271–275, https://doi.org/10.1002/col.10062.Suche in Google Scholar

Hunt, R.W.G. (2006). The reproduction of colour, 6th ed. John Wiley & Sons, Chichester.Suche in Google Scholar

Huysman, S., De Schaepmeester, D., Ragaert, K., Dewulf, J., and De Meester, S. (2017). Performance indicators for a circular economy: a case study on post-industrial plastic waste. Resour. Conserv. Recycl. 120: 46–54, https://doi.org/10.1016/j.resconrec.2017.01.013.Suche in Google Scholar

Jawahar, M., Narasimhan Kannana, C.B., and Kondamudi Manobhaib, M. (2015). Artificial neural networks for colour prediction in leather dyeing on the basis of a tristimulus system. Color. Technol. 131: 48–57, https://doi.org/10.1111/cote.12123.Suche in Google Scholar

Kangal, M.O. and Ücerler, Z. (2018). Recycling of virgin and post-consumer polypropylene and high density polyethylene. Int. Polym. Proc. 33: 268–275, https://doi.org/10.3139/217.3506.Suche in Google Scholar

Lee, Y.K. (2007). Changes in the translucency of porcelain and repairing resin composite by the illumination. Dent. Mater. 23: 492–497, https://doi.org/10.1016/j.dental.2006.03.004.Suche in Google Scholar PubMed

Liedl, B. and Burgstaller, C. (2024). Influence of selected contaminations and melt filtration on the properties of ABS and ABS recyclate. Polym. Eng. Sci. 64: 3025–3035, https://doi.org/10.1002/pen.26743.Suche in Google Scholar

Lillotte, T.D., Joester, M., Frindt, B., Berghaus, A., Lammens, R.F., and Wagner, K.G. (2021). UV–VIS spectra as potential process analytical technology (PAT) for measuring the density of compressed materials: evaluation of the CIELAB color space. Int. J. Pharm. 603: 120668, https://doi.org/10.1016/j.ijpharm.2021.120668.Suche in Google Scholar PubMed

Liu, T., Dong, T., and Liu, B. (2024). Effect of sinusoidal pulsating speed enhancement on the mixing performance of plastics machinery. Int. Polym. Proc. 39: 260–272, https://doi.org/10.1515/ipp-2023-4459.Suche in Google Scholar

Mokrzycki, W. and Tatol, M. (2012). Color difference Delta E – a survey. Mach. Graph. & Vis. 20: 383–411.Suche in Google Scholar

Plastic Europe (2022). Plastics – the facts 2022. Plastic Europe, Brussels, Belgium.Suche in Google Scholar

Plastic Europe (2023). Plastics: the fast facts 2023. Plastic Europe, Brussels, Belgium.Suche in Google Scholar

Pöttinger, M., Marschik, C., Straka, K., Fellner, K., and Steinbichler, G. (2024a). A comparative study of color sensors for inline color measurement of recyclates in injection molding. AIP Conf. Proc. 3158: 020002, https://doi.org/10.1063/5.0205773.Suche in Google Scholar

Pöttinger, M., Marschik, C., Straka, K., Fellner, K., and Steinbichler, G. (2024b). Inline color measurement and analysis of the influence of machine parameters on the color of injection molded parts. J. Plast. Technol. 20: 94–116, https://doi.org/10.3139/O999.01022024.Suche in Google Scholar

Ragaert, K., Delva, L., and Van Geem, K. (2017). Mechanical and chemical recycling of solid plastic waste. Waste Manage. 69: 24–58, https://doi.org/10.1016/j.wasman.2017.07.044.Suche in Google Scholar PubMed

Ragonnaud, G. (2023). Revision of the packaging and packaging waste directive. European Parliamentary Research Service, Brussels, Belgium.Suche in Google Scholar

Santos, G., Esmizadeh, E., and Riahinezhad, M. (2024). Recycling construction, renovation, and demolition plastic waste: review of the status quo, challenges and opportunities. J. Polym. Environ. 32: 479–509, https://doi.org/10.1007/s10924-023-02982-z.Suche in Google Scholar

Schlindwein, W., Bezerra, M., Almeida, J., Berghaus, A., Owen, M., and Muirhead, G. (2023). In-line UV vis spectroscopy as a fast-working process analytical technology (PAT) during early phase product development using hot melt extrusion (HME). Pharmaceutics 10, https://doi.org/10.3390/pharmaceutics10040166.Suche in Google Scholar PubMed PubMed Central

Schnittmann, O. and Schulze Lammers, P. (2017). A true-color sensor and suitable evaluation algorithm for plant recognition. Sensors 17: 1823, https://doi.org/10.3390/s17081823.Suche in Google Scholar PubMed PubMed Central

Távora de Mello Soares, C., Ek, M., Östmark, E., Gällstedt, M., and Kalrsson, S. (2022). Recycling of multi- material multilayer plastic packaging: current trends and future scenarios. Resour. Conserv. Recycl. 176: 105905, https://doi.org/10.1016/j.resconrec.2021.105905.Suche in Google Scholar

Vargas, W.E. and Niklasson, G.A. (1997). Applicability conditions of the Kubelka–Munk theory. Appl. Opt. 36: 5580–5586, https://doi.org/10.1364/AO.36.005580.Suche in Google Scholar PubMed

Viscarra Rossel, R.A., Minasny, B., Roudier, P., and McBratney, A.B. (2006). Colour space models for soil science. Geoderma 133: 320–337, https://doi.org/10.1016/j.geoderma.2005.07.017.Suche in Google Scholar

Zsíros, L., Suplicz, A., Romhány, G., Tábi, T., and Kovács, J.G. (2024). Development of a novel color inhomogeneity test method for injection molded parts. Polym. Test. 37: 112–116, https://doi.org/10.1016/j.polymertesting.2014.05.009.Suche in Google Scholar