Compressive properties and energy absorption of ordered porous aluminum with strengthening structures
-
Moqiu Li
,
Mingming Su
Abstract
In this paper, Z-strengthening structure (strengthening the Z-axis struts) and Graded-Z-strengthening structure (strengthening the Z-axis struts and node by gradient) based on cubic structure were investigated. Specimens were fabricated by indirect additive manufacturing. The compressive properties and energy absorption were characterized by axial quasi-static compression tests. The results showed that Z-strengthening enhances the compressive properties and energy absorption capacity of the original cubic structure. As for Graded-Z-strengthening, the stiffness of the structures was further increased. Moreover, different strengthening structures change the failure mode of the structures, which has a significant effect on mechanical properties and energy absorption capacities.
-
Research ethics: ALL procedures performed in studies were in accordance with the ethical standards.
-
Informed consent: Informed consent was obtained from all individuals included in this study, or their legal guardians or wards.
-
Author contributions: Moqiu Li: Writing – review & editing, Writing – original draft, Visualization, Validation, Software, Resources, Methodology, Investigation, Formal analysis, Data curation. Yu Bai: Writing – review & editing, Supervision, Funding acquisition, Formal analysis. Mingming Su: Methodology, Investigation. Hai Hao: Writing – review & editing, Supervision, Funding acquisition, Formal analysis.
-
Use of Large Language Models, AI and Machine Learning Tools: This paper did not use Large Language Models, AI and Machine Learning Tools.
-
Conflict of interest: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
-
Research funding: National Natural Science Foundation of China [52171030], the Key Basic Research Project of the Basic Strengthen Program [2021-JCJQ-ZD-043-00] and the National Key Research and Development Program of China [2018YFA0702903].
-
Data availability: Data will be made available on request.
References
1. Gibson, L. J.; Ashby, M. F. Cellular Solids: Structure and Properties; Cambridge University Press: Cambridge, 1997.10.1017/CBO9781139878326Suche in Google Scholar
2. Banhart, J. Manufacture, Characterisation and Application of Cellular Metals and Metal Foams. Prog. Mater. Sci. 2001, 46 (6), 559–632. https://doi.org/10.1016/S0079-6425(00)00002-5.Suche in Google Scholar
3. Mosanenzadeh, S. G.; Naguib, H. E.; Park, C. B.; Atalla, N. Design and Development of Novel Bio-Based Functionally Graded Foams for Enhanced Acoustic Capabilities. J. Mater. Sci. 2015, 50, 1248–1256. https://doi.org/10.1007/s10853-014-8681-6.Suche in Google Scholar
4. Kirsch, K. L.; Thole, K. A. Pressure Loss and Heat Transfer Performance for Additively and Conventionally Manufactured Pin Fin Arrays. Int. J. Heat Mass Tran. 2017, 108, 2502–2513. https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.095.Suche in Google Scholar
5. Lu, T. J.; Stone, H. A.; Ashby, M. F. Heat Transfer in Open-Cell Metal Foams. Acta Mater. 1998, 46 (10), 3619–3635. https://doi.org/10.1016/S1359-6454(98)00031-7.Suche in Google Scholar
6. Jamshidinia, M.; Wang, L.; Tong, W.; Kovacevic, R. The Bio-Compatible Dental Implant Designed by Using Non-Stochastic Porosity Produced by Electron Beam Melting® (EBM). J. Mater. Process. Technol. 2014, 214 (8), 1728–1739. https://doi.org/10.1016/j.jmatprotec.2014.02.025.Suche in Google Scholar
7. Brandt, M.; Sun, S.; Leary, M.; Feih, S.; Elambasseril, J.; Liu, Q. High-Value SLM Aerospace Components: From Design to Manufacture. Adv. Mater. Res. 2013, 633, 135–147. https://doi.org/10.4028/www.scientific.net/AMR.633.135.Suche in Google Scholar
8. Parthasarathy, J.; Starly, B.; Raman, S. A Design for the Additive Manufacture of Functionally Graded Porous Structures with Tailored Mechanical Properties for Biomedical Applications. J. Manuf. Process. 2011, 13 (2), 160–170. https://doi.org/10.1016/j.jmapro.2011.01.004.Suche in Google Scholar
9. Wang, X. J.; Xu, S. Q.; Zhou, S. W.; Xu, W.; Leary, M.; Choong, P.; Qian, M.; Brandt, M.; Xie, Y. M. Topological Design and Additive Manufacturing of Porous Metals for Bone Scaffolds and Orthopaedic Implants: A Review. Biomaterials 2016, 83, 127–141. https://doi.org/10.1016/j.biomaterials.2016.01.012.Suche in Google Scholar PubMed
10. Su, M. M.; Wang, H.; Hao, H.; Fiedler, T. Compressive Properties of Expanded Glass and Alumina Hollow Spheres Hybrid Reinforced Aluminum Matrix Syntactic Foams. J. Alloys Compd. 2020, 821, 153233. https://doi.org/10.1016/j.jallcom.2019.153233.Suche in Google Scholar
11. Kemény, A.; Movahedi, N.; Fiedler, T.; Maróti, J. E.; Orbulov, I. N. The Influence of Infiltration Casting Technique on Properties of Metal Syntactic Foams and Their Foam-Filled Tube Structures. Mater. Sci. Eng. A 2022, 852, 143706. https://doi.org/10.1016/J.MSEA.2022.143706.Suche in Google Scholar
12. Orbulov, I. N.; Kemény, A.; Filepc, Á.; Gácsic, Z. Compressive Characteristics of Bimodal Aluminium Matrix Syntactic Foams. Compos. Part A 2019, 124, 105479. https://doi.org/10.1016/J.COMPOSITESA.2019.105479.Suche in Google Scholar
13. Marx, J. C.; Robbins, S. J.; Grady, Z. A.; Palmieri, F. L.; Wohl, C. J.; Rabiei, A. Polymer Infused Composite Metal Foam as a Potential Aircraft Leading Edge Material. Appl. Surf. Sci. 2020, 505, 144114. https://doi.org/10.1016/J.APSUSC.2019.144114.Suche in Google Scholar
14. Qu, H.; Rao, D.; Cui, J.; Gupta, N.; Wang, H.; Chen, Y.; Li, A.; Pan, L. Mg-Matrix Syntactic Foam Filled with Alumina Hollow Spheres Coated by MgO Synthesized with Solution Coating-Sintering. J. Mater. Res. Technol. 2023, 24, 2357–2371. https://doi.org/10.1016/J.JMRT.2023.03.160.Suche in Google Scholar
15. Movahedi, N.; Vesenjak, M.; Krstulović-Opara, K. L.; Belova, I. V.; Murch, G. E.; Fiedler, T. Dynamic Compression of Functionally-Graded Metal Syntactic Foams. Compos. Struct. 2021, 261, 113308. https://doi.org/10.1016/J.COMPSTRUCT.2020.113308.Suche in Google Scholar
16. Movahedi, N.; Fiedler, T. Sustainable Metallic Syntactic Foams Containing Cork Particles. Mater. Lett. 2024, 358, 135866. https://doi.org/10.1016/J.MATLET.2024.135866.Suche in Google Scholar
17. Qiu, C.; Yue, S.; Adkins, N. J. E.; Ward, M.; Hassanin, H.; Lee, P. D.; Withers, P. J.; Attallah, M. M. Influence of Processing Conditions on Strut Structure and Compressive Properties of Cellular Lattice Structures Fabricated by Selective Laser Melting. Mater. Sci. Eng. A 2015, 628 (25), 188–197. https://doi.org/10.1016/j.msea.2015.01.031.Suche in Google Scholar
18. Zhang, Y.; Liu, T.; Tizani, W. Experimental and Numerical Analysis of Dynamic Compressive Response of Nomex Honeycombs. Compos. Part B: Eng. 2018, 148, 27–39. https://doi.org/10.1016/j.compositesb.2018.04.025.Suche in Google Scholar
19. Cao, X.; Duan, S.; Liang, J.; Wen, W.; Fang, D. Mechanical Properties of an Improved 3D-Printed Rhombic Dodecahedron Stainless Steel Lattice Structure of Variable Cross Section. Int. J. Mech. Sci. 2018, 145, 53–63. https://doi.org/10.1016/j.ijmecsci.2018.07.006.Suche in Google Scholar
20. Mun, J.; Yun, B. G.; Ju, J.; Chang, B. M. Indirect Additive Manufacturing Based Casting of a Periodic 3D Cellular Metal – Flow Simulation of Molten Aluminum Alloy. J. Manuf. Process. 2015, 17, 28–40. https://doi.org/10.1016/j.jmapro.2014.11.001.Suche in Google Scholar
21. Snelling, D.; Qian, L.; Meisel, N.; Williams, C. B.; Batra, R. C.; Druschitz, A. P. Lightweight Metal Cellular Structures Fabricated via 3D Printing of Sand Cast Molds. Adv. Eng. Mater. 2015, 17 (7), 923–932. https://doi.org/10.1002/adam.201400524.Suche in Google Scholar
22. Li, S. J.; Xu, Q. S.; Wang, Z.; Hou, W. T.; Hao, Y. L.; Yang, R.; Murr, L. E. Influence of Cell Shape on Mechanical Properties of Ti–6Al–4V Meshes Fabricated by Electron Beam Melting Method. Acta Biomater. 2014, 10 (10), 4537–4547. https://doi.org/10.1016/j.actbio.2014.06.010.Suche in Google Scholar PubMed
23. Amirkhani, S.; Bagheri, R.; Yazdi, A. Z. Manipulating Failure Mechanism of Rapid Prototyped Scaffolds by Changing Nodal Connectivity and Geometry of the Pores. J. Biomech. 2012, 45 (16), 2866–2875. https://doi.org/10.1016/j.jbiomech.2012.08.029.Suche in Google Scholar PubMed
24. Leary, M.; Mazur, M.; Elambasseril, J.; Mcmillah, M.; Chirent, T.; Sun, Y.; Qian, M.; Easton, M.; Brandt, M. Selective Laser Melting (SLM) of AlSi12Mg Lattice Structures. Mater. Des. 2016, 98, 344–357. https://doi.org/10.1016/j.matdes.2016.02.127.Suche in Google Scholar
25. Maskery, I.; Aboulkhair, N. T.; Aremu, A. O.; Tuck, C. J.; Ashcroft, I. A.; Wildman, R. D.; Hague, R. J. M. A Mechanical Property Evaluation of Graded Density Al-Si10-Mg Lattice Structures Manufactured by Selective Laser Melting. Mater. Sci. Eng. A 2016, 670, 264–274. https://doi.org/10.1016/j.msea.2016.06.013.Suche in Google Scholar
26. Mostofizadeh, P.; Dorey, R. A.; Mohagheghian, I. Elastic Properties Prediction of Two- and Three-Dimensional Multi-Material Lattices. Thin-Walled Struct. 2024, 201, 112015. https://doi.org/10.1016/J.TWS.2024.112015.Suche in Google Scholar
27. Yuan, W.; Liu, W.; Song, H.; Huang, C. Butterfly Lattice Materials for Controllable Multi-Stage Energy Absorption. Compos. Struct. 2023, 324, 117550. https://doi.org/10.1016/J.COMPSTRUCT.2023.117550.Suche in Google Scholar
28. Wang, J.; Zhu, J.; Meng, L.; Sun, Q.; Liu, T.; Zhang, W. Topology Optimization of Gradient Lattice Structure Filling with Damping Material under Harmonic Frequency Band Excitation. Eng. Struct. 2024, 309, 118014. https://doi.org/10.1016/J.ENGSTRUCT.2024.118014.Suche in Google Scholar
29. Zhou, H.; Zhang, D. Z.; He, N. Compressive Properties of Novel Hybrid-Dimensional Gyroid Lattice Structure. Mater. Lett. 2023, 344, 134424. https://doi.org/10.1016/J.MATLET.2023.134424.Suche in Google Scholar
30. Liang, Z.; Chen, X.; Sun, Z.; Guo, Y.; Li, Y.; Chang, H.; Zhou, L. A Study on the Compressive Mechanical Properties of 316L Diamond Lattice Structures Manufactured by Laser Powder Bed Fusion Based on Actual Relative Density. J. Manuf. Process. 2022, 84, 414–423. https://doi.org/10.1016/J.JMAPRO.2022.09.041.Suche in Google Scholar
31. Wang, H.; Fu, Y.; Su, M.; Hao, H. Effect of Structure Design on Compressive Properties and Energy Absorption Behavior of Ordered Porous Aluminum Prepared by Rapid Casting. Mater. Des. 2019, 167, 107631. https://doi.org/10.1016/j.matdes.2019.107631.Suche in Google Scholar
32. Wang, Z.; Li, P. Characterisation and Constitutive Model of Tensile Properties of Selective Laser Melted Ti-6Al-4V Struts for Microlattice Structures. Mater. Sci. Eng. A 2018, 725, 350–358. https://doi.org/10.1016/j.msea.2018.04.006.Suche in Google Scholar
33. Afshar, M.; Anaraki, A. P.; Montazerion, H.; Kadkhodapour, J. Additive Manufacturing and Mechanical Characterization of Graded Porosity Scaffolds Designed Based on Triply Periodic Minimal Surface Architectures. J. Mech. Behav. Biomed. Mater. 2016, 62, 481–494. https://doi.org/10.1016/j.jmbbm.2016.05.027.Suche in Google Scholar PubMed
© 2025 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Original Papers
- Effects of spray pyrolysis parameters on structural and morphological properties of WO3 thin films prepared from WCl6 precursor and hydrazine mono hydrate as a solvent
- Compressive properties and energy absorption of ordered porous aluminum with strengthening structures
- Ultrasound’s influence on the properties of cellulose/Halloysite clay nanotube nanocomposites
- Polymer/phytochemical mediated eco-friendly synthesis of Cu/Zn doped hematite nanoparticles revealing biological properties and photocatalytic activity
- Green synthesis of silver nanoparticles using Pupalia lappacea L. (Juss) and their antimicrobial application
- News
- DGM – Deutsche Gesellschaft für Materialkunde
Artikel in diesem Heft
- Frontmatter
- Original Papers
- Effects of spray pyrolysis parameters on structural and morphological properties of WO3 thin films prepared from WCl6 precursor and hydrazine mono hydrate as a solvent
- Compressive properties and energy absorption of ordered porous aluminum with strengthening structures
- Ultrasound’s influence on the properties of cellulose/Halloysite clay nanotube nanocomposites
- Polymer/phytochemical mediated eco-friendly synthesis of Cu/Zn doped hematite nanoparticles revealing biological properties and photocatalytic activity
- Green synthesis of silver nanoparticles using Pupalia lappacea L. (Juss) and their antimicrobial application
- News
- DGM – Deutsche Gesellschaft für Materialkunde
