Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer
-
Yan Zhang
,
YiDi Gao
Abstract
In this work, TA2/T2 was used as a composite interlayer to prevent the formation of brittle Ti-Fe intermetallics when joining TC4 Ti alloy to 304 stainless steel. The TA2/T2 (commercially pure Ti and Cu) composite interlayer was prepared by explosive welding. The laser was focused on the TC4-TA2 interface, which joined the TC4 and TA2 by fusion welding. At the TC4-TA2 interface, a weld zone was formed due to the mixing of molten TC4 and TA2. The laser was also focused on the T2-304 stainless steel interface, a weld zone was formed due to the mixing of molten T2 and 304 stainless steel. Composite interlayer TA/T2 was used not only to prevent the formation of Ti-Fe intermetallics during welding but also to improve microstructure and properties of the stainless steel–Ti alloy joint. The joint fractured at the TA2/T2 explosive welding interface with a maximum tensile strength of 428 MPa.
References
[1] S. Saadat, J. Salichs, M. Noori, Z. Hou, H. Davoodi, I. Bar-on, Y. Suzuki, A. Masuda: Smart. Mater. Struct. 11 (2002) 218. DOI:10.1088/0964-1726/11/2/30510.1088/0964-1726/11/2/305Suche in Google Scholar
[2] S.A. Shabalovskaya: Bio-Med. Mater. Eng. 6 (1995) 267. DOI:10.3233/BME-1996-640510.3233/BME-1996-6405Suche in Google Scholar
[3] Y.D. Gao, Y. Zhang, X.Y. Gu: Mater. Lett. 255 (2019) 126521. DOI:10.1016/j.matlet.2019.12652110.1016/j.matlet.2019.126521Suche in Google Scholar
[4] I. Tomashchuk, D. Grevey: Mater. Sci.Eng. A. 622 (2015) 37. DOI:10.1016/j.msea.2014.10.08410.1016/j.msea.2014.10.084Suche in Google Scholar
[5] S. Kundu, S. Chatterjee: Mate. Charact. 59 (2008) 631. DOI:10.1016/j.matchar.2007.05.01510.1016/j.matchar.2007.05.015Suche in Google Scholar
[6] Y. Zhang, D.Q. Sun, X.Y. Gu, Y.J. Liu: Int. J. Adv. Manuf. Technol. 90 (2017) 953. DOI:10.1007/s00170-016-9453-z10.1007/s00170-016-9453-zSuche in Google Scholar
[7] M. Lee, J. Park, J. Lee, C. Rhee: J. Nucl. Mater. 439 (2013) 168. DOI:10.1016/j.jnucmat.2013.04.00210.1016/j.jnucmat.2013.04.002Suche in Google Scholar
[8] I. Magnabosco, P. Ferro, F. Bonollo, L. Arnberg: Mater. Sci. Eng A. 424 (2006) 163. DOI:10.1016/j.msea.2006.03.09610.1016/j.msea.2006.03.096Suche in Google Scholar
[9] S. Fukumoto, T. Inoue, S. Mizuno, K. Okita, T. Tomita, A. Yamamoto: Sci. Technol. Weld. Join. 15 (2010) 124. DOI:10.1179/136217109X1257781448669210.1179/136217109X12577814486692Suche in Google Scholar
[10] W. Li, L. Yan, S. Karnati: J. Mater. Process. Technol. 242 (2017) 39. DOI:10.1016/j.jmatprotec.2016.11.01010.1016/j.jmatprotec.2016.11.010Suche in Google Scholar
[11] Y. Zhang, D.Q. Sun, X.Y. Gu, L. HongMei: Mater. Lett. 185 (2016) 152. DOI:10.1016/j.matlet.2016.08.13810.1016/j.matlet.2016.08.138Suche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
Artikel in diesem Heft
- Contents
- Original Contributions
- A multiscale mean field model for elastic properties of hypereutectoid pearlitic steels with different microstructures
- Refining performance and recession of Al–TiO2–C–La2O3 refiners
- Abrasive wear response of Al-Si–SiCp composite: Effect of friction heat and friction coefficient
- Thermodynamic assessment of the Sb–S and In–S binary systems
- Increased coercivity in recalcined barium ferrite–magnetite nanocomposites
- Reporting the magnetic profile of cobalt ferrite nanoparticles at different temperatures
- Fabrication of monoclinic BiVO4 photocatalyst film and its photocatalytic activity for organic pollutant removal
- Characterization and thermal properties of chitosan/perlite nanocomposites
- STEM investigations of the influence of copper on alumina scale detachment during in-situ wetting experiments of Al-7Si-0.3Mg alloy with 95Sn-5Cu filler metal
- Short Communications
- Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
Artikel in diesem Heft
- Contents
- Original Contributions
- A multiscale mean field model for elastic properties of hypereutectoid pearlitic steels with different microstructures
- Refining performance and recession of Al–TiO2–C–La2O3 refiners
- Abrasive wear response of Al-Si–SiCp composite: Effect of friction heat and friction coefficient
- Thermodynamic assessment of the Sb–S and In–S binary systems
- Increased coercivity in recalcined barium ferrite–magnetite nanocomposites
- Reporting the magnetic profile of cobalt ferrite nanoparticles at different temperatures
- Fabrication of monoclinic BiVO4 photocatalyst film and its photocatalytic activity for organic pollutant removal
- Characterization and thermal properties of chitosan/perlite nanocomposites
- STEM investigations of the influence of copper on alumina scale detachment during in-situ wetting experiments of Al-7Si-0.3Mg alloy with 95Sn-5Cu filler metal
- Short Communications
- Microstructure and mechanical properties of laser welded titanium alloy and stainless steel joint with composite interlayer
- Notifications
- Deutsche Gesellschaft für Materialkunde / German Materials Science Society
