Deutsche Gesellschaft für Materialkunde / German Materials Science Society

Articles in the same Issue

1. Contents
2. Original Contributions
3. Predicting doped Fe-based superconductor critical temperature from structural and topological parameters using machine learning
4. Preparation of ZnO nanoflakes and assessment of their removal of HCN, NO₂ and SO₂ toxic gases
5. Performance analysis and comparison of methyl-modified Al₂O₃/SiO₂ xerogels fabricated by two methods
6. The effect of SiC nanoparticles and sintering temperature on the structural and wear properties of Cu–MWCNTs–SiC hybrid nanocomposites
7. Synthesis and characterization of Co–B–Fe–Ti nanosized alloyed powders
8. Characterization of H13 steel powder oxidation at different temperatures
9. Diffusion-alloying sintering of Cr–Mo pre-alloyed iron powders with carbon: The effect of the carbon introduction method on the sinter’s properties
10. The effect of structure and texture on pure magnesium properties
11. Mechanism of kink band formation in zinc single crystals
12. Microstructural and fractographic analysis of A359/Si₃N₄ surface composite produced by friction stir processing
13. Effect of heat treatment on the microstructure and properties of 25Cr2MoVA petroleum casing steel
14. Notifications
15. Deutsche Gesellschaft für Materialkunde / German Materials Science Society