Home Synthesis and characterization of Co–B–Fe–Ti nanosized alloyed powders
Article
Licensed
Unlicensed Requires Authentication

Synthesis and characterization of Co–B–Fe–Ti nanosized alloyed powders

  • Hasan Eskalen EMAIL logo , Mikail Aslan , Hakan Yaykaşlı and Musa Gögebakan
Published/Copyright: February 19, 2021
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 112 Issue 1

Abstract

In this study, novel Co60Fe18Ti18B4 alloy powders have been synthesized with high compositional homogeneity using a high-energy ball milling technique. The structural, morphological and mechanical properties of the nanosized alloyed powders were examined using different analytical techniques, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectrometry and X-ray diffraction. According to the X-ray diffraction analysis for both Co powder and Co60Fe18Ti18B4 alloy powders, with increasing milling time, the content of Co-based (hcp) solid solution decreased and Co-based (fcc) solid solution increased. The mechanical properties of the material were also investigated by Vickers micro-hardness testing. The micro-hardness value of the Co60Fe18Ti18B4 alloy was found as 120.08 HV. After sintering (1 h– 1000 °C), the hardness improved remarkably (536.32 HV). Furthermore, results indicate that the synthesized Co-based alloy powder has both glassy and nanocrystalline phase forms.

Keywords: Amorphous structures; Nanocrystals; Nanomaterials; Mechanical alloying; Nanoparticles
Dr. Hasan Eskalen Vocational School of Health Services Department of Opticianry Kahramanmaraş Sütçü İmam University Kahramanmaraş, Turkey Tel.: +90 344300-4729 E-mail: eskalen@ksu.edu.tr

References

[1] R.K. Gupta, N. Birbilis: Corros. Sci. 92 (2015) 1. 10.1016/j.corsci.2014.11.041Search in Google Scholar

[2] M.M. Khan, A. Nemati, Z.U. Rahman, U.H. Shah, H. Asgar, W. Haider: Crit. Rev. Solid State Mater. Sci. 43 (2018) 233. DOI:10.1080/10408436.2017.135814910.1080/10408436.2017.1358149Search in Google Scholar

[3] H.R. Peng, M.M. Gong, Y.Z. Chen, F. Liu: Int. Mater. Rev. 62 (2017) 303. DOI:10.1080/09506608.2016.125753610.1080/09506608.2016.1257536Search in Google Scholar

[4] M. Aslan: J. Nanoparticle Res. 21 (2019) 255. DOI:10.1007/s11051-019-4636-910.1007/s11051-019-4636-9Search in Google Scholar

[5] J. Li, G. Doubek, L. McMillon-Brown, A.D. Taylor: Adv. Mater. 31 (2019) 1970050. DOI:10.1002/adma.20197005010.1002/adma.201970050Search in Google Scholar

[6] J.-M. Wu, S.-J. Lin, J.-W. Yeh, S.-K. Chen, Y.-S. Huang, H.-C. Chen: Wear. 261 (2006) 513. DOI:10.1016/j.wear.2005.12.00810.1016/j.wear.2005.12.008Search in Google Scholar

[7] B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, R.O. Ritchie : Science. 345 (2014) 1153 LP. PMid:25190791; DOI:10.1126/science.125458110.1126/science.1254581Search in Google Scholar PubMed

[8] T. Liu, F. Li, A. Wang, L. Xie, Q. He, J. Luan, A. He, X. Wang, C.T. Liu, Y. Yang: J. Alloys Compd. 776 (2019) 606. DOI:10.1016/j.jallcom.2018.10.31910.1016/j.jallcom.2018.10.319Search in Google Scholar

[9] F. Wang, A. Inoue, F.L. Kong, S.L. Zhu, E. Shalaan, F. Al-Marzouki, W.J. Botta, C.S. Kiminami, Y.P. Ivanov, A.L. Greer: Acta Mater. 170 (2019) 50. DOI:10.1016/j.actamat.2019.03.00810.1016/j.actamat.2019.03.008Search in Google Scholar

[10] J. Zhao, Q. Gao, H. Wang, F. Shu, H. Zhao, W. He, Z. Yu: J. Alloys Compd. 785 (2019) 846. DOI:10.1016/j.jallcom.2019.01.05610.1016/j.jallcom.2019.01.056Search in Google Scholar

[11] N. Loudjani, M. Benchiheub, M. Bououdina: J. Supercond. Nov. Magn. 29 (2016) 2717. DOI:10.1007/s10948-016-3541-z10.1007/s10948-016-3541-zSearch in Google Scholar

[12] Y.X. Wang, Z.Y. Pan, Y.K. Ho, Y. Xu, A.J. Du: Nucl. Instruments Methods Phys. Res. B. 180 (2001) 251. DOI:10.1016/S0168-583X(01)00425-610.1016/S0168-583X(01)00425-6Search in Google Scholar

[13] S.-D. Jesús, A.M. Bolarín-Miró, C.A. Cortés Escobedo, G. Torres-Villaseñor, P. Vera-Serna: J. Metall. 2016 (2016).Search in Google Scholar

[14] R.A. Rastabi, A. Ghasemi, M. Tavoosi, T. Sodaee: J. Magn. Magn. Mater. 416 (2016) 174. DOI:10.1016/j.jmmm.2016.04.05510.1016/j.jmmm.2016.04.055Search in Google Scholar

[15] F.Z. Bentayeb, S. Alleg, J.M. Grenèche: J. Alloys Compd. 434 –435 (2007) 477. DOI:10.1016/j.jallcom.2006.08.11110.1016/j.jallcom.2006.08.111Search in Google Scholar

[16] N.K. Prasad, V. Kumar: J. Mater. Sci. Mater. Electron. 26 (2015) 10109. DOI:10.1007/s10854-015-3695-710.1007/s10854-015-3695-7Search in Google Scholar

[17] H. Raanaei, H. Eskandari, V. Mohammad-Hosseini: J. Magn. Magn. Mater. 398 (2016) 190. DOI:10.1016/j.jmmm.2015.09.03110.1016/j.jmmm.2015.09.031Search in Google Scholar

[18] P. Loginov, D. Sidorenko, M. Bychkova, M. Petrzhik, E. Levashov: Met.. 7 (2017). DOI:10.3390/met712057010.3390/met7120570Search in Google Scholar

[19] M. Hocine, A. Guittoum, M. Hemmous, D. Martínez-Blanco, P. Gorria, B. Rahal, J.A. Blanco, J.J. Sunol, A. Laggoun: J. Magn. Magn. Mater. 422 (2017) 149. DOI:10.1016/j.jmmm.2016.08.05810.1016/j.jmmm.2016.08.058Search in Google Scholar

[20] H. Moumeni, A. Nemamcha, S. Alleg, J.M. Grenèche: Mater. Chem. Phys. 138 (2013) 209. DOI:10.1016/j.matchemphys.2012.11.04810.1016/j.matchemphys.2012.11.048Search in Google Scholar

[21] B. Avar: J. Non. Cryst. Solids. 432 (2016) 246. DOI:10.1016/j.jnoncrysol.2015.10.01610.1016/j.jnoncrysol.2015.10.016Search in Google Scholar

[22] M.S. El-Eskandarany, M. Omori, A. Inoue: J. Mater. Res. 20 (2005) 2845. DOI:10.1557/JMR.2005.034410.1557/JMR.2005.0344Search in Google Scholar

[23] M.R. Jafari Jezeh, M. Tavoosi, A. Ghasemi, R. Farshadnia: J. Supercond. Nov. Magn. 29 (2016) 1377. DOI:10.1007/s10948-016-3422-510.1007/s10948-016-3422-5Search in Google Scholar

[24] A.H. Taghvaei, A.M. Khoshrodi: J. Alloys Compd. 742 (2018) 887. DOI:10.1016/j.jallcom.2018.01.38210.1016/j.jallcom.2018.01.382Search in Google Scholar

[25] H.S. Nickjeh, A.H. Taghvaei, P. Ramasamy, J. Eckert: J. Alloys Compd. 843 (2020) 155913. DOI:10.1016/j.jallcom.2020.15591310.1016/j.jallcom.2020.155913Search in Google Scholar

[26] H. Eskalen, S. Uruş, H. Yaykaşlı, M. Gögebakan: Alloy Mater. Their Allied Appl. (2020) 91. DOI:10.1002/9781119654919.ch610.1002/9781119654919.ch6Search in Google Scholar

[27] N. Li, F. Yin, L. Feng: Metals (Basel). 9 (2019) 464. DOI:10.3390/met904046410.3390/met9040464Search in Google Scholar

[28] K. Yoshida, T. Takahashi, H. Kuwata: AIP Adv. 9 (2019) 35218. DOI:10.1063/1.507994210.1063/1.5079942Search in Google Scholar

[29] M. Nabiałek, B. Je_z, K. Błoch, P. Pietrusiewicz, J. Gondro: J. Magn. Magn. Mater. 477 (2019) 214. DOI:10.1016/j.jmmm.2019.01.07310.1016/j.jmmm.2019.01.073Search in Google Scholar

[30] M. Vaidya, A. Karati, A. Marshal, K.G. Pradeep, B.S. Murty: J. Alloys Compd. 770 (2019) 1004. DOI:10.1016/j.jallcom.2018.08.20010.1016/j.jallcom.2018.08.200Search in Google Scholar

[31] Y. Afkham, R.A. Khosroshahi, R. Taherzadeh Mousavian, D. Brabazon, R. Kheirifard: Part. Sci. Technol. 36 (2018) 72. DOI:10.1080/02726351.2016.121177810.1080/02726351.2016.1211778Search in Google Scholar

[32] M. Baricco, T.A. Başer, G. Fiore, R. Piccin, M. Satta, A. Castellero, P. Rizzi, L. Battezzati: Mater. Sci. Forum. 604–605 (2008) 229. 10.4028/www.scientific.net/MSF.604-605.22910.4028/www.scientific.net/MSF.604-605.229Search in Google Scholar

[33] V. Shivam, J. Basu, Y. Shadangi, M.K. Singh, N.K. Mukhopadhyay: J. Alloys Compd. 757 (2018) 87. DOI:10.1016/j.jallcom.2018.05.05710.1016/j.jallcom.2018.05.057Search in Google Scholar

[34] X. Li, Y. Wu, S. Yang, X. Cha, P. Shao, L. Wang: J. Non. Cryst. Solids. 503–504 (2019) 284. DOI:10.1016/j.jnoncrysol.2018.10.01010.1016/j.jnoncrysol.2018.10.010Search in Google Scholar

[35] S. Lesz, M. Kremzer, K. Gołombek, R. Nowosielski: Arch. Metall. Mater. 63 (2018). DOI:10.24425/12241310.24425/122413Search in Google Scholar

[36] K.B. Zhang, Z.Y. Fu, J.Y. Zhang,W.M.Wang, S.W. Lee, K. Niihara: J. Alloys Compd. 495 (2010) 33. DOI: 10.1016/j.jallcom.2009.12.01010.1016/j.jallcom.2009.12.010Search in Google Scholar

[37] E.B. Yekta, A.H. Taghvaei, S. Sharafi: Powder Technol. 322 (2017) 241. DOI:10.1016/j.powtec.2017.08.05910.1016/j.powtec.2017.08.059Search in Google Scholar

[38] M.R.J. Jezeh, M. Tavoosi, A. Ghasemi, R. Farshadnia: J. Non. Cryst. Solids. 427 (2015) 26. DOI:10.1016/j.jnoncrysol.2015.07.02810.1016/j.jnoncrysol.2015.07.028Search in Google Scholar

[39] A. Hoseinpur, M.M. Bezanaj, M.S. Marashi, J.V. Khaki: Int. J. Mater. Res. 109 (2018) 250. DOI:10.3139/146.11159910.3139/146.111599Search in Google Scholar

[40] P. Shunmuga Sundaram, T. Sangeetha, S. Rajakarthihan, R. Vijayalaksmi, A. Elangovan, G. Arivazhagan: Phys. B Condens. Matter. 595 (2020) 412342. DOI:10.1016/j.physb.2020.41234210.1016/j.physb.2020.412342Search in Google Scholar

[41] B. Avar, M. Gogebakan, S. Ozcan, S. Kerli: J. Korean Phys. Soc. 65 (2014) 664. DOI:10.3938/jkps.65.66410.3938/jkps.65.664Search in Google Scholar

[42] E.J. Mittemeijer, U. Welzel: Zeitschrift Für Krist. 223 (2008) 552. DOI:10.1524/zkri.2008.121310.1524/zkri.2008.1213Search in Google Scholar

[43] C. Kursun, M. Gogebakan, H. Eskalen, S. Uruş, J.H. Perepezko: J. Inorg. Organomet. Polym. Mater. 30 (2020) 494. DOI:10.1007/s10904-019-01209-w10.1007/s10904-019-01209-wSearch in Google Scholar

[44] B.V Neamţu, H.F. Chicinaş, T.F. Marinca, O. Isnard, I. Chicinaş: J. Alloys Compd. 673 (2016) 80. DOI:10.1016/j.jallcom.2016.02.23310.1016/j.jallcom.2016.02.233Search in Google Scholar

[45] B.V Neamţu, T.F. Marinca, I. Chicinaş, O. Isnard, F. Popa: Adv. Powder Technol. 26 (2015) 323. DOI:10.1016/j.apt.2014.10.01410.1016/j.apt.2014.10.014Search in Google Scholar

[46] M.M. Bezanaj, J.V. Khaki, A. Hoseinpur: Metall. Mater. Trans. B. 46 (2015) 2713. DOI:10.1007/s11663-015-0439-210.1007/s11663-015-0439-2Search in Google Scholar

[47] A. Hoseinpur, M.M. Bezanaj, J.V. Khaki: Int. J. Mater. Res. 107 (2016) 935. DOI:10.3139/146.11141610.3139/146.111416Search in Google Scholar

[48] S.N. Patankar, S.-Q. Xiao, J.J. Lewandowski, A.H. Heuer: J. Mater. Res. 8 (1993) 1311. DOI:10.1557/JMR.1993.131110.1557/JMR.1993.1311Search in Google Scholar

[49] P. Moazzen, M.R. Toroghinejad, F. Karimzadeh, J. Vleugels, H. Ravash, P. Cavaliere: Powder Metall. 61 (2018) 405. DOI:10.1080/00325899.2018.152874810.1080/00325899.2018.1528748Search in Google Scholar

[50] A. Hitit, M. Geçgin, P. Öztürk: J. Mater. Sci. Technol. 31 (2015) 148. DOI:10.1016/j.jmst.2014.09.00410.1016/j.jmst.2014.09.004Search in Google Scholar

[51] E. Zhang, C. Liu: Mater. Sci. Eng. C. 69 (2016) 134. PMid:27612736; DOI:10.1016/j.msec.2016.05.02810.1016/j.msec.2016.05.028Search in Google Scholar PubMed

[52] K. Nová, P. Novák, D. Dvorský: Mater. Tehnol. 51 (2017) 443. DOI:10.17222/mit.2016.05410.17222/mit.2016.054Search in Google Scholar

[53] N. Park, X. Li, N. Tsuji: JOM. 67 (2015) 2303. DOI:10.1007/s11837-015-1586-210.1007/s11837-015-1586-2Search in Google Scholar

[54] X. Luo, C. Fang, F. Yao, H. Zhao, S. Yan: Trans. Indian Inst. Met. 72 (2019) 1791. DOI:10.1007/s12666-019-01651-x10.1007/s12666-019-01651-xSearch in Google Scholar

[55] L.R. Kanyane, A.P. Popoola, N. Malatji: IOP Conf. Ser. Mater. Sci. Eng. 538 (2019) 012009. DOI:10.1088/1757-899X/538/1/01200910.1088/1757-899X/538/1/012009Search in Google Scholar

[56] M. Aslan, E. Ergül, A. Kaya, H. Kurt, N Yılmaz: ECJSE. 7 (2020) 773 . DOI:10.31202/ecjse.74288710.31202/ecjse.742887Search in Google Scholar

Received: 2020-01-20
Accepted: 2020-10-23
Published Online: 2021-02-19

© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany

Articles in the same Issue

  1. Contents
  2. Original Contributions
  3. Predicting doped Fe-based superconductor critical temperature from structural and topological parameters using machine learning
  4. Preparation of ZnO nanoflakes and assessment of their removal of HCN, NO2 and SO2 toxic gases
  5. Performance analysis and comparison of methyl-modified Al2O3/SiO2 xerogels fabricated by two methods
  6. The effect of SiC nanoparticles and sintering temperature on the structural and wear properties of Cu–MWCNTs–SiC hybrid nanocomposites
  7. Synthesis and characterization of Co–B–Fe–Ti nanosized alloyed powders
  8. Characterization of H13 steel powder oxidation at different temperatures
  9. Diffusion-alloying sintering of Cr–Mo pre-alloyed iron powders with carbon: The effect of the carbon introduction method on the sinter’s properties
  10. The effect of structure and texture on pure magnesium properties
  11. Mechanism of kink band formation in zinc single crystals
  12. Microstructural and fractographic analysis of A359/Si3N4 surface composite produced by friction stir processing
  13. Effect of heat treatment on the microstructure and properties of 25Cr2MoVA petroleum casing steel
  14. Notifications
  15. Deutsche Gesellschaft für Materialkunde / German Materials Science Society
https://doi.org/10.1515/ijmr-2020-7704
Keywords for this article
Amorphous structures; Nanocrystals; Nanomaterials; Mechanical alloying; Nanoparticles

Articles in the same Issue

  1. Contents
  2. Original Contributions
  3. Predicting doped Fe-based superconductor critical temperature from structural and topological parameters using machine learning
  4. Preparation of ZnO nanoflakes and assessment of their removal of HCN, NO2 and SO2 toxic gases
  5. Performance analysis and comparison of methyl-modified Al2O3/SiO2 xerogels fabricated by two methods
  6. The effect of SiC nanoparticles and sintering temperature on the structural and wear properties of Cu–MWCNTs–SiC hybrid nanocomposites
  7. Synthesis and characterization of Co–B–Fe–Ti nanosized alloyed powders
  8. Characterization of H13 steel powder oxidation at different temperatures
  9. Diffusion-alloying sintering of Cr–Mo pre-alloyed iron powders with carbon: The effect of the carbon introduction method on the sinter’s properties
  10. The effect of structure and texture on pure magnesium properties
  11. Mechanism of kink band formation in zinc single crystals
  12. Microstructural and fractographic analysis of A359/Si3N4 surface composite produced by friction stir processing
  13. Effect of heat treatment on the microstructure and properties of 25Cr2MoVA petroleum casing steel
  14. Notifications
  15. Deutsche Gesellschaft für Materialkunde / German Materials Science Society
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 19.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2020-7704/html
Scroll to top button