Article
Open Access
Ferritic Stainless Steels for High-Temperature Applications: Stabilization of the Microstructure by Solid State Precipitation of MX Carbonitrides
-
N. Nabiran
,
S. Weber
Published/Copyright:
October 26, 2013
Received: 2013-1-11
Accepted: 2013-6-12
Published Online: 2013-10-26
Published in Print: 2013-12-1
©[2013] by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- Forge and Heat-treatments in Microalloyed Steels – A Review
- Creep and Creep-rupture Behavior of 2124-T851 Aluminum Alloy
- A Thermodynamic Model for Evaluation of Mass Action Concentrations of La2O3-Al2O3-CaF2-CaO-MgO Slags for Electroslag Remelting Based on the Ion and Molecule Coexistence Theory
- Microstructure, Mechanical and Electrical Properties of CuO Doped 8YSZ
- Preparation and Characterization of Polyaniline/Hexagonal Boron Nitride Composites
- Ferritic Stainless Steels for High-Temperature Applications: Stabilization of the Microstructure by Solid State Precipitation of MX Carbonitrides
- Effect of Thermal Shock on Grindability of Zircon for Preparation of Zircon Flour
- Electrochemical Impedance Spectra for the Corrosion of Porous Cu-35mass%Ni-(5,10)mass%Cr Alloys in Molten (0.62Li,0.38K)2CO3 at 650 °C in Air
- Dielectric Properties and Microwave Heating Characteristics of Sodium Chloride at 2.45 GHz
- Effect of Cooling Rate on the Microstructure and Precipitates of Directional Solidified 50W600 Non-oriented Silicon Steel
Keywords for this article
high-temperature strength;
long-term annealing;
ferritic stainless steels;
MX carbonitrides;
CALPHAD method
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Masthead
- Forge and Heat-treatments in Microalloyed Steels – A Review
- Creep and Creep-rupture Behavior of 2124-T851 Aluminum Alloy
- A Thermodynamic Model for Evaluation of Mass Action Concentrations of La2O3-Al2O3-CaF2-CaO-MgO Slags for Electroslag Remelting Based on the Ion and Molecule Coexistence Theory
- Microstructure, Mechanical and Electrical Properties of CuO Doped 8YSZ
- Preparation and Characterization of Polyaniline/Hexagonal Boron Nitride Composites
- Ferritic Stainless Steels for High-Temperature Applications: Stabilization of the Microstructure by Solid State Precipitation of MX Carbonitrides
- Effect of Thermal Shock on Grindability of Zircon for Preparation of Zircon Flour
- Electrochemical Impedance Spectra for the Corrosion of Porous Cu-35mass%Ni-(5,10)mass%Cr Alloys in Molten (0.62Li,0.38K)2CO3 at 650 °C in Air
- Dielectric Properties and Microwave Heating Characteristics of Sodium Chloride at 2.45 GHz
- Effect of Cooling Rate on the Microstructure and Precipitates of Directional Solidified 50W600 Non-oriented Silicon Steel
