Artikel
Open Access
Effect of Two Kinds of Refiners on the Solidification Structure and Property of Invar Alloy
-
Hong-guang Zheng
,
Li-jiang Yao
Veröffentlicht/Copyright:
22. März 2013
Received: 2012-08-01
Accepted: 2013-01-06
Published Online: 2013-03-22
Published in Print: 2013-08-16
©[2013] by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Masthead
- Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C
- Effects of Different Heat Treatment Conditions on Fatigue Behavior of AA7075 Alloy
- Microstructure and Mechanical Property Optimization of NiTiAl-based Alloys: Directional Solidification in Novel Ceramic Crucibles
- Effect of Ag on the Hot Corrosion of NiAl Intermetallic Compound
- Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts
- Effect of Two Kinds of Refiners on the Solidification Structure and Property of Invar Alloy
- Analysis of the Raman Frequency Shifts for the Lattice Modes and Vibrons Related to the Thermodynamic Quantities in the η Phase of Solid Nitrogen
- Synthesis and Characterization of Uniform Zirconia Particles by Homogeneous Precipitation Method
- High-Temperature Oxidation Behavior of Cu-Si-Y Alloys
- Determination of Direct Reduction Conditions of Mill Scale
- Recrystalization Behavior of Coldworked 14Cr-15Ni-2Mo Austenitic Stainless Steel Under Tensile Deformation
Schlagwörter für diesen Artikel
Fe-36Ni;
invar alloy;
Ce;
Zr-Ti;
solidification structure;
ductility
Creative Commons
BY-NC-ND 3.0
Artikel in diesem Heft
- Masthead
- Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C
- Effects of Different Heat Treatment Conditions on Fatigue Behavior of AA7075 Alloy
- Microstructure and Mechanical Property Optimization of NiTiAl-based Alloys: Directional Solidification in Novel Ceramic Crucibles
- Effect of Ag on the Hot Corrosion of NiAl Intermetallic Compound
- Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts
- Effect of Two Kinds of Refiners on the Solidification Structure and Property of Invar Alloy
- Analysis of the Raman Frequency Shifts for the Lattice Modes and Vibrons Related to the Thermodynamic Quantities in the η Phase of Solid Nitrogen
- Synthesis and Characterization of Uniform Zirconia Particles by Homogeneous Precipitation Method
- High-Temperature Oxidation Behavior of Cu-Si-Y Alloys
- Determination of Direct Reduction Conditions of Mill Scale
- Recrystalization Behavior of Coldworked 14Cr-15Ni-2Mo Austenitic Stainless Steel Under Tensile Deformation
