Home Inheritance of basic density and microfibril angle and their variations among full-sib families and their parental clones in Picea glehnii
Article
Licensed
Unlicensed Requires Authentication

Inheritance of basic density and microfibril angle and their variations among full-sib families and their parental clones in Picea glehnii

  • Jun Tanabe , Akira Tamura , Futoshi Ishiguri EMAIL logo , Yuya Takashima , Kazuya Iizuka and Shinso Yokota
Published/Copyright: October 25, 2014
Become an author with De Gruyter Brill

Abstract

Picea glehnii is one of the most important plantation species in Hokkaido, Japan. Basic density (BD) and microfibril angle (MFA) of the S2 layer in latewood tracheid in 16 full-sib families and their six parental clones planted in Hokkaido were examined to clarify among-family and clonal variations of wood properties and their inheritance from parents to offspring. Mean values of BD and MFA in full-sib families and parental clones were 0.36 and 0.35 g cm-3 and 16.1° and 10.7°, respectively. Estimated repeatabilities of BD and MFA in juvenile wood (jW) were higher than those in mature wood. In addition, larger genetic coefficient of variation was detected for jW, indicating that improvement of jW properties is important to Hokkaido’s tree breeding program. Parent-offspring correlation coefficients were positive and significant in all properties. These results suggest that the influence of parental clones on wood properties is inheritable to offspring. Moreover, there were no significant differences between reciprocal crosses of wood properties, suggesting that plus-tree clones with good wood properties can be used as either female or male parents for producing offspring. There is a possibility of improving wood properties in P. glehnii by crossing clones with desirable properties.


Corresponding author: Futoshi Ishiguri, Faculty of Agriculture, Utsunomiya University, Utsunomiya 321-8505, Japan, e-mail:

References

Alteyrac, J., Cloutier, A., Ung, C.H., Zhang, S.Y. (2006) Mechanical properties in relation to selected wood characteristics of black spruce. Wood Fiber Sci. 38:229–237.Search in Google Scholar

Cornelius, J. (1994) Heritabilities and additive genetic coefficients of variation in forest trees. Can. J. Forest Res. 24:372–379.10.1139/x94-050Search in Google Scholar

Falconer, D.S., Mackay, T.F.C. Introduction to Quantitative Genetics (4th ed.). Longman Group, Essex. 1996.Search in Google Scholar

Gräns, D., Hannrup, B., Isik, F., Lundqvist, S.O., McKeand, S. (2009) Genetic variation and relationships to growth traits for microfibril angle, wood density and modulus of elasticity in a Picea abies clonal trial in southern Sweden. Scand. J. Forest Res. 24:494–503.10.1080/02827580903280061Search in Google Scholar

Hannrup, B., Cahalan, C., Chantre, G., Grabner, M., Karlsson, B., Le Bayon, I., Jones, G.L., Müller, U., Pereira, H., Rodrigues, J.C., Rosner, S., Rozenberg, P., Wilhelmsson, L., Wimmer, R. (2004) Genetic parameters of growth and wood quality traits in Picea abies. Scand. J. Forest Res. 19:14–29.10.1080/02827580310019536Search in Google Scholar

Hirakawa, Y., Fujisawa, Y. (1996) The S2 microfibril angle variations in the vertical direction of latewood tracheids in sugi (Cryptomeria japonica) trees. Mokuzai Gakkaishi 42:107–114. In Japanese with English summary.Search in Google Scholar

Iizuka, K., Akutsu, H., Itahana, N. (1999) Clonal variation of wood quality in the grafted plus-trees of Picea glehnii. J. Jpn Forest Soc. 81:325–329. In Japanese with English summary.Search in Google Scholar

Iizuka, K., Hayashi, E., Itahana, N. (2000) Comparative analysis of growth and wood quality of Picea glehnii plus-tree-clones growing in various seed orchards. J. Jpn. Forest Soc. 82:80–86. In Japanese with English summary.Search in Google Scholar

Ivkovich, M., Namkoong, G., Koshy, M. (2002) Genetic variation in wood properties of interior spruce. II. Tracheid characteristics. Can. J. Forest Res. 32:2128–2139.10.1139/x02-139Search in Google Scholar

Kawaguchi, N., Takahashi, M., Okubo, I. (1986) The qualities of plantation-grown akaezomatsu (I). J. Hokkaido Forest Res. Inst. 416:1–10.Search in Google Scholar

Kennedy, R.W. (1995) Coniferous wood quality in the future: concerns and strategies. Wood Sci. Technol. 29:321–338.10.1007/BF00202581Search in Google Scholar

Kita, K. (2008) Picea glehnii, P. jezoensis, P. abies. In: Forest Tree Breeding and Forest Genetic Resource in Hokkaido. Ed. Hokkaido Rinboku Ikusyu Kyokai. Ebetsu, Japan. pp. 61–81. In Japanese.Search in Google Scholar

Kobayashi, Y. (1952) A simple method of demonstrating the fibrillar orientation in lignified walls. J. Jpn. Forest Soc. 34:392–393. In Japanese.Search in Google Scholar

Koubaa, A., Isabel, N., Zhang, S.Y., Beaulieu, J., Bousquet, J. (2005) Transition from juvenile to mature wood in black spruce (Picea mariana (Mill.) B.S.P.). Wood Fiber Sci. 37:445–455.Search in Google Scholar

Lenz, P., Cloutier, A., MacKay, J., Beaulieu, J. (2010) Genetic control of wood properties in Picea glauca: an analysis of trends with cambial age. Can. J. Forest Res. 40:703–715.10.1139/X10-014Search in Google Scholar

Lindstörm, H., Evans, R., Reale, M. (2005) Implications of selecting tree clones with high modulus of elasticity. N. Z. J. Forest Sci. 35:50–71.Search in Google Scholar

Lynch, M., Walsh, B. Genetics and Analysis of Quantitative Traits. Sinauer, Sunderland, 1998.Search in Google Scholar

Oribe, Y., Kohno, K. (2000) Traits of growth rate in the intraspecific crossbreeds of Picea glehnii and in the species hybrids from Picea glehnii and Picea abies. Bull. Forest Tree Breed. Inst. 17:127–134. In Japanese with English summary.Search in Google Scholar

Panshin, A.J., de Zeeuw, C. Text Book of Wood Technology. McGraw-Hill Book Co., New York, 1980.Search in Google Scholar

Senft, J.F., Bendtsen, B.A. (1985) Measuring microfibrilar angles using lightmicroscopy. Wood Fiber Sci. 17:564–567.Search in Google Scholar

R Development Core Team (2010) R: a language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0. http://www.R-project.org/.Search in Google Scholar

Rozenberg, P., Cahalan, C. (1997) Spruce and wood quality: genetic aspects (a review). Silvae Genet. 46:270–279.Search in Google Scholar

Yamashita, K., Kubojima, Y., Katsuki, T., Akashi, K. (2010) Wood properties of Picea koyamae: within-tree variation of grain angle, tracheid length, microfibril angle, wood density and shrinkage. Bull. FFPRI. 414:19–29.Search in Google Scholar

Zobel, B.J., van Buijtenen, J.P. Wood Variation: Its Causes and Control. Springer-Verlag, Berlin, Heidelberg, 1989.10.1007/978-3-642-74069-5Search in Google Scholar

Received: 2014-2-20
Accepted: 2014-9-26
Published Online: 2014-10-25
Published in Print: 2015-7-1

©2015 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Study on the residual lignin in Eucalyptus globulus sulphite pulp
  4. Hydrogenolysis of lignin in ZnCl2 and KCl as an inorganic molten salt medium
  5. Synthesis of lignin polyols via oxyalkylation with propylene carbonate
  6. Preparation of water-dispersive poly(3,4-ethylenedioxythiophene) (PEDOT) conductive nanoparticles in lignosulfonic acid solution
  7. Properties of polyurethane (PUR) films prepared from liquefied wood (LW) and ethylene glycol (EG)
  8. Dynamic response of earlywood and latewood within annual growth ring structure of Scots pine subjected to changing relative humidity
  9. One-stage thermo-hydro treatment (THT) of hardwoods: an analysis of form stability after five soaking-drying cycles
  10. The variation of tangential rheological properties caused by shrinkage anisotropy and moisture content gradient in white birch disks
  11. Inheritance of basic density and microfibril angle and their variations among full-sib families and their parental clones in Picea glehnii
  12. Mechanical properties and chemical composition of beech wood exposed for 30 and 120 days to white-rot fungi
  13. Chemical improvement of surfaces. Part 3: Covalent modification of Scots pine sapwood with substituted benzoates providing resistance to Aureobasidium pullulans staining fungi
  14. Chemical and ultrastructural changes of ash wood thermally modified using the thermo-vacuum process: I. Histo/cytochemical studies on changes in the structure and lignin chemistry
  15. Chemical and ultrastructural changes of ash wood thermally modified (TMW) using the thermo-vacuum process: II. Immunocytochemical study of the distribution of noncellulosic polysaccharides
  16. Revisiting hardboard properties from the fiber sorting point of view
  17. Effects of acetylation and formalization on the dynamic water vapor sorption behavior of wood
  18. Immune-regulatory activity of methanolic extract of Acacia confusa heartwood and melanoxetin isolated from the extract
  19. Stereomicroscopic optical method for the assessment of load transfer patterns across the wood-adhesive bond interphase
Downloaded on 4.11.2025 from https://www.degruyterbrill.com/document/doi/10.1515/hf-2014-0052/html
Scroll to top button