Startseite A miniaturized dual band pass frequency selective surface insensitive to oblique angles and polarizations of wave
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

A miniaturized dual band pass frequency selective surface insensitive to oblique angles and polarizations of wave

  • Gulab Shah , Qunsheng Cao EMAIL logo , Afzal Ahmed und Bin Wang
Veröffentlicht/Copyright: 26. April 2024
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
Frequenz
Aus der Zeitschrift Frequenz Band 78 Heft 7-8

Abstract

A Dualband Pass Frequency Selective Structure (DPSFSS) with miniaturized elements is proposed in this article. The miniaturized elements induce high inductance and capacitance values. The meandered line concept is used which extensively increases inductance of the dipole element. Very large capacitance is obtained between two meandered elements which have wide common area perpendicular to electric field for wave propagating in Z-direction. Two pass band poles and two zeros are obtained by perpendicular arrangement of meandered patterns on two sides of the substrate. Orthogonal arrangement of patterns ensure polarization symmetry (polarization insensitive) for Transverse Electric (TE) and Transverse Magnetic (TM) modes of exciting wave. Two pass band pole frequencies are positioned at 1.84 GHz and 4.53 GHz with low Insertion Losses (IL) of 0.67 dB and 1 dB, respectively. The lower and higher frequency bands have factional bandwidths of 41 % and 46 %, respectively. The transmission nulls occupy 2.8 GHz and 6.58 GHz frequencies. The structure is miniaturized to 0.032λ0 × 0.032λ0 dimensions with respect to lowest resonance residing at 1.83 GHz. The low IL at both pass bands is realized despite of using a lossy FR-4 material that can be improved to less than 0.5 dB at both the bands using less lossy materials such as F4BME or RO4003C. The proposed DPSFSS design is elaborated using Equivalent Circuit Model (ECM) and Surface Current Distribution (SCD). Measurements are performed on fabricated DPSFSS prototype and it is observed that the measured results coincide well with the simulated response. Angle stability of the DPSFSS is excellent and no unwanted resonances are observed at oblique angles upto 80° for dual polarizations of wave.

Keywords: dual band pass; miniaturization; high angle stability; polarization symmetry
Corresponding author: Qunsheng Cao, Electronics and Information Engineering, Nanjing University of Aeronautic and Astronauts, Nanjing, China, E-mail:

Acknowledgment

We are thankful to Nanjing University of Aeronautics and Astronauts for the financial support of the prototype fabrication and measurements.

  1. Research ethics: The proposed work as whole is our contribution. Copyrights are transferred to Frequenz journal.

  2. Author contributions: The first author of the article has published 27 SCI and conference papers.

  3. Competing interests: The authors state no conflict of interests.

  4. Research funding: There is no funding agency source for this article. However, the fabrication and measurements are funded by Nanjing University of Aeronautics and Astronauts.

  5. Data availability: The paper is published as closed access. Rest is according to journals data availability policy.

References

[1] S. M. A. M. H. Abadi and N. Behdad, “Wideband linear-to-circular polarization converters based on miniaturized-element frequency selective surfaces,” IEEE Trans. Antenn. Propag., vol. 64, no. 2, pp. 525–534, 2015.10.1109/TAP.2015.2504999Suche in Google Scholar

[2] S. M. A. M. H. Abadi, K. Ghaemi, and N. Behdad, “Ultra-wideband, true-time-delay reflectarray antennas using ground-plane-backed, miniaturized-element frequency selective surfaces,” IEEE Trans. Antenn. Propag., vol. 63, no. 2, pp. 534–542, 2014.10.1109/TAP.2014.2381231Suche in Google Scholar

[3] J. Lorenzo, A. Lázaro, R. Villarino, and D. Girbau, “Modulated frequency selective surfaces for wearable RFID and sensor applications,” IEEE Trans. Antenn. Propag., vol. 64, no. 10, pp. 4447–4456, 2016. https://doi.org/10.1109/tap.2016.2596798.Suche in Google Scholar

[4] J. R. Reis, R. F. S. Caldeirinha, A. Hammoudeh, and N. Copner, “Electronically reconfigurable FSS-inspired transmitarray for 2-D beamsteering,” IEEE Trans. Antenn. Propag., vol. 65, no. 9, pp. 4880–4885, 2017. https://doi.org/10.1109/tap.2017.2723087.Suche in Google Scholar

[5] J. Wang, J. Xiang Ge, Y. Zhou, H. Xia, and X. Zhi Yang, “Design of a high-isolation 35/94-ghz dual-frequency orthogonal-polarization cassegrain antenna,” IEEE Antenn. Wireless Propag. Lett., vol. 16, pp. 1297–1300, 2017, https://doi.org/10.1109/lawp.2016.2633284.Suche in Google Scholar

[6] M. Li and N. Behdad, “Frequency selective surfaces for pulsed high-power microwave applications,” IEEE Trans. Antenn. Propag., vol. 61, no. 2, pp. 677–687, 2012. https://doi.org/10.1109/tap.2012.2225133.Suche in Google Scholar

[7] X.-C. Zhu, et al.., “Design of a bandwidth-enhanced polarization rotating frequency selective surface,” IEEE Trans. Antenn. Propag., vol. 62, no. 2, pp. 940–944, 2013. https://doi.org/10.1109/tap.2013.2290798.Suche in Google Scholar

[8] S. M. A. Momeni Hasan Abadi, M. Li, and N. Behdad, “Harmonic-suppressed miniaturized-element frequency selective surfaces with higher order bandpass responses,” IEEE Trans. Antenn. Propag., vol. 62, no. 5, pp. 2562–2571, 2014. https://doi.org/10.1109/tap.2014.2303822.Suche in Google Scholar

[9] L.-L. Yang, X.-C. Wei, D. Yi, and J.-M. Jin, “A bandpass frequency selective surface with a low cross-polarization based on cavities with a hybrid boundary,” IEEE Trans. Antenn. Propag., vol. 65, no. 2, pp. 654–661, 2016. https://doi.org/10.1109/tap.2016.2634281.Suche in Google Scholar

[10] G. Shah, Q. Cao, Z. U. Abidin, and Z. Rafique, “A 2 b dual-band multifunction frequency selective surface,” IEEE Antenn. Wireless Propag. Lett., vol. 19, no. 6, pp. 954–958, 2020. https://doi.org/10.1109/lawp.2020.2984592.Suche in Google Scholar

[11] X. Zeng, M. Gao, L. Zhang, G. Wan, and B. Hu, “Design of a tuneable and broadband absorber using a switchable transmissive/reflective FSS,” IET Microw. Antenn. Propag., vol. 12, no. 7, pp. 1211–1215, 2018. https://doi.org/10.1049/iet-map.2017.0691.Suche in Google Scholar

[12] G. Shah, Q. Cao, Z. U. Abidin, Y. Jing, and M. Azeem, “A 4-bit multistate frequency-selective surface with dual-band multifunction response,” IEEE Antenn. Wireless Propag. Lett., vol. 20, no. 10, pp. 1844–1848, 2021. https://doi.org/10.1109/lawp.2021.3076862.Suche in Google Scholar

[13] A. Ebrahimi, Z. Shen, W. Withayachumnankul, S. F. Al-Sarawi, and D. Abbott, “Varactor-tunable second-order bandpass frequency-selective surface with embedded bias network,” IEEE Trans. Antenn. Propag., vol. 64, no. 5, pp. 1672–1680, 2016. https://doi.org/10.1109/tap.2016.2537378.Suche in Google Scholar

[14] G. Shah, Q. Cao, Z. A. Dayo, and M. Azeem, “Double layer multifunction frequency selective surface equipped with a tricharacteristic response,” IEEE Trans. Electromagn. Compat., vol. 64, no. 2, pp. 295–302, 2022. https://doi.org/10.1109/temc.2021.3114596.Suche in Google Scholar

[15] D. F. Mamedes, A. Gomes Neto, J. C. e Silva, and J. Bornemann, “Design of reconfigurable frequency-selective surfaces including the PIN diode threshold region,” IET Microw. Antenn. Propag., vol. 12, no. 9, pp. 1483–1486, 2018. https://doi.org/10.1049/iet-map.2017.0761.Suche in Google Scholar

[16] G. Shah, Q. Cao, M. Azeem, and Z. Ul Abidin, “Novel 4-bit second-order multifunction frequency selective surface,” IET Microw. Antenn. Propag., vol. 15, no. 7, pp. 744–753, 2021. https://doi.org/10.1049/mia2.12079.Suche in Google Scholar

[17] V. K. Chakradhary, H. B. Baskey, R. Roshan, A. Pathik, and M. J. Akhtar, “Design of frequency selective surface-based hybrid nanocomposite absorber for stealth applications,” IEEE Trans. Microw. Theor. Tech., vol. 66, no. 11, pp. 4737–4744, 2018. https://doi.org/10.1109/tmtt.2018.2864298.Suche in Google Scholar

[18] Y. Yu, T. Deng, and Z. Shen, “Wideband 3D frequency selective rasorber based on ferrite absorber,” in 2017 IEEE Int. Symp. Antennas Propag. Usn. Natl. Radio Sci. Meet., vol. 2017, 2017, pp. 681–668.10.1109/APUSNCURSINRSM.2017.8072383Suche in Google Scholar

[19] G. Shah, Q. Cao, Z. U. Abidin, and Z. Rafique, “A hybrid element triband frequency selective surface with high angular stability and polarization insensitivity,” IEEE Trans. Electromagn. Compat., vol. 62, no. 6, pp. 2759–2764, 2020. https://doi.org/10.1109/temc.2020.2986276.Suche in Google Scholar

[20] R. Panwar and J. R. Lee, “Progress in frequency selective surface-based smart electromagnetic structures: a critical review,” Aero. Sci. Technol., vol. 66, pp. 216–234, 2017, https://doi.org/10.1016/j.ast.2017.03.006.Suche in Google Scholar

[21] Z. U. Abidin, Q. Cao, G. Shah, Z. A. Dayo, and M. Ejaz, “Miniaturized frequency selective surface with high angular stability,” Frequenz, vol. 76, nos. 3–4, pp. 239–245, 2022. https://doi.org/10.1515/freq-2021-0116.Suche in Google Scholar

[22] Z. U. Abidin, Q. Cao, G. Shah, and M. Azeem, “Design of a novel miniaturized bandstop frequency selective surface exhibiting polarization insensitivity and enhanced oblique stability,” Int. J. RF Microw. Computer-Aided Eng., vol. 30, no. 8, p. e22263, 2020. https://doi.org/10.1002/mmce.22263.Suche in Google Scholar

[23] Z. U. Abidin, Q. Cao, and G. Shah, “Design of a compact single-layer frequency selective surface with high oblique stability,” IEEE Trans. Electromagn. Compat., vol. 64, no. 6, pp. 2060–2066, 2022. https://doi.org/10.1109/temc.2022.3207412.Suche in Google Scholar

[24] Y. Li, P. Ren, Z. Xiang, B. Xu, and R. Chen, “Design of dual-stopband fss with tightly spaced frequency response characteristics,” IEEE Microw. Wireless Compon. Lett., vol. 32, no. 8, pp. 1011–1014, 2022. https://doi.org/10.1109/lmwc.2022.3164070.Suche in Google Scholar

[25] X. Sheng, J. Ge, K. Han, and X.-C. Zhu, “Transmissive/reflective frequency selective surface for satellite applications,” IEEE Antenn. Wireless Propag. Lett., vol. 17, no. 7, pp. 1136–1140, 2018. https://doi.org/10.1109/lawp.2018.2830408.Suche in Google Scholar

[26] M. Qu, Y. Feng, J. Su, and S. M. A. Shah, “Design of a single-layer frequency selective surface for 5g shielding,” IEEE Microw. Wireless Compon. Lett., vol. 31, no. 3, pp. 249–252, 2021. https://doi.org/10.1109/lmwc.2021.3053286.Suche in Google Scholar

[27] S. Xu, et al.., “A novel miniaturized ultra-wideband frequency selective surface with rapid band edge,” IEEE Access, vol. 9, pp. 161854–161861, 2021, https://doi.org/10.1109/access.2021.3131629.Suche in Google Scholar

[28] S. Dey and S. Dey, “Conformal miniaturized angular stable triband frequency selective surface for emi shielding,” IEEE Trans. Electromagn. Compat., vol. 64, no. 4, pp. 1031–1041, 2022. https://doi.org/10.1109/temc.2022.3153998.Suche in Google Scholar

[29] A. Varuna, S. Ghosh, H. Sheokand, and K. V. Srivastava, “A polarization-insensitive miniaturized element frequency selective surface using meander lines,” in 2018 Twenty Fourth National Conference on Communications (NCC), 2018, pp. 1–4.10.1109/NCC.2018.8600227Suche in Google Scholar

[30] A. Varuna, S. Ghosh, and K. V. Srivastava, “A miniaturized-element bandpass frequency selective surface using meander line geometry,” Microw. Opt. Technol. Lett., vol. 59, no. 10, pp. 2484–2489, 2017. https://doi.org/10.1002/mop.30760.Suche in Google Scholar

[31] T. Hong, M. Wang, K. Peng, Q. Zhao, and S. Gong, “Compact ultra-wide band frequency selective surface with high selectivity,” IEEE Trans. Antenn. Propag., vol. 68, no. 7, pp. 5724–5729, 2020. https://doi.org/10.1109/tap.2020.2963905.Suche in Google Scholar

[32] T. Li, et al.., “A novel miniaturized strong-coupled fss structure with excellent angular stability,” IEEE Trans. Electromagn. Compat., vol. 63, no. 1, pp. 38–45, 2020. https://doi.org/10.1109/temc.2020.3018558.Suche in Google Scholar

[33] T. Hong, K. Peng, and M. Wang, “Miniaturized frequency selective surface using handshake convoluted stripe,” IEEE Antenn. Wireless Propag. Lett., vol. 18, no. 10, pp. 2026–2030, 2019. https://doi.org/10.1109/lawp.2019.2936548.Suche in Google Scholar

[34] M. Gao, S. M. A. Momeni Hasan Abadi, and N. Behdad, “A dual-band, inductively coupled miniaturized-element frequency selective surface with higher order bandpass response,” IEEE Trans. Antenn. Propag., vol. 64, no. 8, pp. 3729–3734, 2016. https://doi.org/10.1109/tap.2016.2580181.Suche in Google Scholar

[35] M. N. Hussein, J. Zhou, Y. Huang, M. Kod, and A. P. Sohrab, “Frequency selective surface structure miniaturization using interconnected array elements on orthogonal layers,” IEEE Trans. Antenn. Propag., vol. 65, no. 5, pp. 2376–2385, 2017. https://doi.org/10.1109/tap.2017.2684199.Suche in Google Scholar

[36] K. Sarabandi and N. Behdad, “A frequency selective surface with miniaturized elements,” IEEE Trans. Antenn. Propag., vol. 55, no. 5, pp. 1239–1245, 2007. https://doi.org/10.1109/tap.2007.895567.Suche in Google Scholar

[37] A. R. Varkani, Z. H. Firouzeh, and A. Z. Nezhad, “Equivalent circuit model for array of circular loop FSS structures at oblique angles of incidence,” IET Microw. Antenn. Propag., vol. 12, no. 5, pp. 749–755, 2018. https://doi.org/10.1049/iet-map.2017.1004.Suche in Google Scholar

[38] D. Li, T.-W. Li, E.-P. Li, and Y.-J. Zhang, “A 2.5-D angularly stable frequency selective surface using via-based structure for 5G EMI shielding,” IEEE Trans. Electromagn. Compat., vol. 60, no. 3, pp. 768–775, 2018. https://doi.org/10.1109/temc.2017.2748566.Suche in Google Scholar

[39] D. M. Pozar, Microwave Engineering, 4th ed. USA, Wiley, 1990.Suche in Google Scholar

[40] G. Shah, Z. U. Abidin, and Q. Cao, “A high angle stable and polarization symmetric dual band reconfigurable frequency selective surface,” Frequenz, vol. 77, no. 1–2, pp. 29–38, 2022. https://doi.org/10.1515/freq-2021-0316.Suche in Google Scholar

[41] P.-C. Zhao, Z.-Y. Zong, W. Wu, B. Li, and D.-G. Fang, “Miniaturized-element bandpass fss by loading capacitive structures,” IEEE Trans. Antenn. Propag., vol. 67, no. 5, pp. 3539–3544, 2019. https://doi.org/10.1109/tap.2019.2902633.Suche in Google Scholar

[42] Y. Ma, W. Wu, Y. Yuan, X. Zhang, and N. Yuan, “A convoluted structure for miniaturized dual-bandstop frequency selective surface,” IEEE Antenn. Wireless Propag. Lett., vol. 18, no. 2, pp. 328–332, 2018. https://doi.org/10.1109/lawp.2018.2890008.Suche in Google Scholar

[43] N. Jawad and L. Markley, “A single-layer frequency selective surface with dual wideband band-stop response,” IEEE Antenn. Wireless Propag. Lett., vol. 19, no. 6, pp. 916–920, 2020. https://doi.org/10.1109/lawp.2020.2982132.Suche in Google Scholar
Received: 2023-08-30
Accepted: 2024-03-19
Published Online: 2024-04-26
Published in Print: 2024-08-27

© 2024 Walter de Gruyter GmbH, Berlin/Boston

Artikel in diesem Heft

  1. Frontmatter
  2. Research Articles
  3. New indoor propagation model proposed for future B5G/6G rollout
  4. A miniaturized dual band pass frequency selective surface insensitive to oblique angles and polarizations of wave
  5. Design and equivalent circuit modelling of super compact ultrathin metamaterial absorber for microwave frequency Regime
  6. 3D printed circularly polarized implantable antenna with wideband impedance matching
  7. Design and investigation of cavity backed bowtie antenna with unidirectional radiation pattern using characteristic mode analysis
  8. A compact dual-element UWB-MIMO antenna with single band-notched characteristics
  9. Design and analysis of four leaf clover shaped MIMO antenna for Sub-6 GHz V2X applications
  10. The design and decoupling of TX/RX antenna with omnidirectional conical beam operating at V band
  11. Integration of two dual-port substrate integrated waveguide based MIMO antennas on a common substrate for 5G millimeter wave applications
  12. Antipodal vivaldi array MIMO antenna for 5G FR2 applications at 28 GHz with improved isolation
https://doi.org/10.1515/freq-2023-0286
Schlagwörter für diesen Artikel
dual band pass; miniaturization; high angle stability; polarization symmetry

Artikel in diesem Heft

  1. Frontmatter
  2. Research Articles
  3. New indoor propagation model proposed for future B5G/6G rollout
  4. A miniaturized dual band pass frequency selective surface insensitive to oblique angles and polarizations of wave
  5. Design and equivalent circuit modelling of super compact ultrathin metamaterial absorber for microwave frequency Regime
  6. 3D printed circularly polarized implantable antenna with wideband impedance matching
  7. Design and investigation of cavity backed bowtie antenna with unidirectional radiation pattern using characteristic mode analysis
  8. A compact dual-element UWB-MIMO antenna with single band-notched characteristics
  9. Design and analysis of four leaf clover shaped MIMO antenna for Sub-6 GHz V2X applications
  10. The design and decoupling of TX/RX antenna with omnidirectional conical beam operating at V band
  11. Integration of two dual-port substrate integrated waveguide based MIMO antennas on a common substrate for 5G millimeter wave applications
  12. Antipodal vivaldi array MIMO antenna for 5G FR2 applications at 28 GHz with improved isolation
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 14.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/freq-2023-0286/html
Button zum nach oben scrollen