Abstract
Designing and creating invisible samples of military equipment is important modern science and technical problem. Physically, this is equivalent to reducing the object RCS. It requires fast and accurate tools (experimental or theoretical ones) to determine the RCS of different objects to which various means of reducing visibility are applied. The experimental studies require a lot of time and money, also it provides incomplete information about the object. So, it is important to create numerical effective and physically justified method for the theoretical determining of the complex shape objects RCS. There are well known numerical methods such as SBR. However, in this method there is no suitable approach for effective coating calculating, in particular such coating as a tent. The main goal of this paper is proposing a new method for taking into account some coating that is used for the object masking. To improve the accuracy of such modeling, it is necessary to use a large number of facets. Thus, recalculation of the set of parameters for the coating becomes also a difficult and time-consuming task. Therefore, it is important to develop a method for quickly assessing the effect of the certain coating parameters on the object RCS.
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: None declared.
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
[1] O. I. Sukharevsky, Electromagnetic Wave Scattering by Aerial and Ground Radar Objects, Boca Raton, Taylor & Francis, 2014, p. 337.10.1201/b17239Search in Google Scholar
[2] F. Fuschini, E. M. Vitucci, M. Barbiroli, G. Falciasecca, and V. Degli-Esposti, “Ray tracing propagation modeling for future small-cell and indoor applications: a review of current techniques,” Radio Sci., vol. 50, no. 6, pp. 469–485, 2015, https://doi.org/10.1002/2015rs005659.Search in Google Scholar
[3] H. Zhao, L. Guo, T. Chen, and W. Liu, “Electromagnetic scattering of coated objects over sea surface based on SBR-SDFSM,” J. Electromagn. Waves Appl., vol. 32, no. 9, pp. 1079–1092, 2018, https://doi.org/10.1080/09205071.2017.1417917.Search in Google Scholar
[4] J. Su, H. He, Y. Lu, H. Yin, G. Liu, and Z. Li, “Ultrawideband radar cross-section reduction by a metasurface based on defect lattices and multiwave destructive interference,” Phys. Rev. Appl., vol. 11, no. 4, 2019, Art no. 044088, https://doi.org/10.1103/physrevapplied.11.044088.Search in Google Scholar
[5] M. J. Algar, L. Lozano, J. Moreno, I. González, and F. Cátedra, “An efficient hybrid technique in RCS predictions of complex targets at high frequencies,” J. Comput. Phys., vol. 345, pp. 345–357, 2017, https://doi.org/10.1016/j.jcp.2017.05.035.Search in Google Scholar
[6] A. Di Simone, W. Fuscaldo, L. M. Millefiori, et al.., “Analytical models for the electromagnetic scattering from isolated targets in bistatic configuration: geometrical optics solution,” IEEE Trans. Geosci. Rem. Sens., vol. 58, no. 2, pp. 861–880, 2019.10.1109/TGRS.2019.2941140Search in Google Scholar
[7] A. Angelov, A. Robertson, R. Murray-Smith, and F. Fioranelli, “Practical classification of different moving targets using automotive radar and deep neural networks,” IET Radar, Sonar Navig., vol. 12, no. 10, pp. 1082–1089, 2018, https://doi.org/10.1049/iet-rsn.2018.0103.Search in Google Scholar
[8] Y. Lvovich, A. Preobrazhensky, and O. Choporov, “Modeling of scattering of electromagnetic waves on the base of multialternative optimization,” Inf. Technol. Appl, no. 1, pp. 117–125, 2016.Search in Google Scholar
[9] O. V. Kaz’mina, V. I. Suslyaev, K. V. Dorozhkin, M. R. Kaimonov, and V. I. Stebeneva, “Effect of a coating deposited on foam glass on the ability to absorb high-frequency electromagnetic radiation,” Glass Ceram., vol. 75, nos 5/6, pp. 230–233, 2018.10.1007/s10717-018-0061-2Search in Google Scholar
[10] V. Khrychov and M. Legenkiy, “Facet Model Processing for Complex Shape Object Scattering Calculation,” in IEEE 17th International Conf. on Mathematical Methods in Electromagnetic Theory (MMET), Kyiv, IEEE, 2018, pp. 192–195. https://doi.org/10.1109/MMET.2018.8460400. [accessed 2018].Search in Google Scholar
[11] F. Weinmann, “Ray tracing with PO/PTD for RCS modeling of large complex objects,” IEEE Trans. Antenn. Propag., vol. 54, pp. 1797–1806, Jun. 2006, https://doi.org/10.1109/tap.2006.875910.Search in Google Scholar
[12] V. Khrychov and M. Legenkiy, “Electromagnetic Scattering for Complex Shape Objects with and without Cloaking,” in 2018 9th International Conf. on Ultrawideband and Ultrashort Impulse Signals (UWBUSIS), Odessa, IEEE, 2018, pp. 185-189, https://doi.org/10.1109/UWBUSIS.2018.8520257.Search in Google Scholar
[13] Y. Cocheril and R. Vauzelle, “A new ray-tracing based wave propagation model including rough surfaces scattering,” Prog. Electromagn. Res., vol. 75, pp. 357–381, 2007, https://doi.org/10.2528/pier07061202.Search in Google Scholar
[14] Y. Du and B. Liu, “A numerical method for electromagnetic scattering from dielectric rough surfaces based on the stochastic second degree method,” Prog. Electromagn. Res., vol. 97, pp. 327–342, 2009, https://doi.org/10.2528/pier09092501.Search in Google Scholar
[15] P. Y. Ufimtsev, Method of Edge Waves in the Physical Theory of Diffraction, Moscow, Sov. Radio, 1962, p. 244.Search in Google Scholar
[16] D. Tami, C. G. Rego, D. Guevara, et al.., “Analysis of heuristic uniform theory of diffraction coefficients for electromagnetic scattering prediction,” Int. J. Antenn. Propag., vol. 2018, p. 11, 2018, Art no. 3029152, https://doi.org/10.1155/2018/3029152.Search in Google Scholar
[17] M. Born and E. Wolf, Principles of Optics: Electromagnetic Theory of Propagation, Interference and Diffraction of Light, Oxford, Pergamon Press, 1964.Search in Google Scholar
[18] M. N. Legenkiy and A. Yu. Butrym, “Diffraction of a pulse electromagnetic TM wave on lossy layer in a waveguide” In Proceedings of the Conf. Ultrawideband and Ultrashort Impulse Signals (UWBUSIS 14), 15–19 September 2014, Kharkiv, IEEE, 2014, pp. 104–107.Search in Google Scholar
[19] M. Legenkiy, “Analysis of axially symmetric diffraction grating,” In 2017 XI, International Conference on Antenna Theory and Techniques (ICATT), Kyiv, IEEE, 2017, pp. 128–131, https://doi.org/10.1109/ICATT.2017.7972601.Search in Google Scholar
[20] M. Legenkiy, O. Maslovskiy, M. Kolchigin, and O. Demchenko, Partial Masking of Complex-shaped Objects Using Radio-absorbing Materials // Visnyk of V.N. Karazin Kharkiv National University, Series “Radio Physics and Electronics”, vol. 27, Kharkiv, 2017, pp. 3–8 (in russian).Search in Google Scholar
© 2022 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Research Articles
- Ground plane and selective buried oxide based planar junctionless transistor
- Ultra wideband bandpass filters with specified relative bandwidth
- Reconfigurable bandstop filter using active frequency selective surface, design and fabrication
- 60 GHz beam-tilting coplanar slotted SIW antenna array
- Circularly polarized CPW fed MIMO/Diversity antenna for Wi-Fi and WLAN applications
- A wideband 4-port MIMO antenna supporting sub-6 GHz spectrum for 5G mobile terminals
- An octagonal ultra-wideband double slit antenna for WiMAX and WLAN rejection
- A wideband metamaterial cross polarizer conversion for C and X band applications
- Numerical modeling of electromagnetic scattering from complex shape object with coating
- An efficient adaptive modulation technique over realistic wireless communication channels based on distance and SINR
- Performance analysis of hybrid Fi-Wi network employing OCDMA based NG-PON
- Dependence of specific absorption rate and its distribution inside a homogeneous fruit model on frequency, angle of incidence, and wave polarization
Articles in the same Issue
- Frontmatter
- Research Articles
- Ground plane and selective buried oxide based planar junctionless transistor
- Ultra wideband bandpass filters with specified relative bandwidth
- Reconfigurable bandstop filter using active frequency selective surface, design and fabrication
- 60 GHz beam-tilting coplanar slotted SIW antenna array
- Circularly polarized CPW fed MIMO/Diversity antenna for Wi-Fi and WLAN applications
- A wideband 4-port MIMO antenna supporting sub-6 GHz spectrum for 5G mobile terminals
- An octagonal ultra-wideband double slit antenna for WiMAX and WLAN rejection
- A wideband metamaterial cross polarizer conversion for C and X band applications
- Numerical modeling of electromagnetic scattering from complex shape object with coating
- An efficient adaptive modulation technique over realistic wireless communication channels based on distance and SINR
- Performance analysis of hybrid Fi-Wi network employing OCDMA based NG-PON
- Dependence of specific absorption rate and its distribution inside a homogeneous fruit model on frequency, angle of incidence, and wave polarization