Home Physicochemical and excess properties of binary mixtures of (1-alkyl-3-methylimidazoliumchloride/bromide + ethylene glycol) at T = (288.15 to 333.15) K
Article
Licensed
Unlicensed Requires Authentication

Physicochemical and excess properties of binary mixtures of (1-alkyl-3-methylimidazoliumchloride/bromide + ethylene glycol) at T = (288.15 to 333.15) K

  • Yun-Xia Zhang , Shu-Ni Li EMAIL logo , Quan-Guo Zhai , Yu-Cheng Jiang and Man-Cheng Hu
Published/Copyright: December 17, 2015
Become an author with De Gruyter Brill

Abstract

In the present work, the density, ρ, refractive index, nD, and dynamic viscosity, η, for four binary solutions containing ionic liquids [Cnmim]X (Cnmim = 1-alkyl-3-methylimidazolium; n = 6, 8; X = Cl, Br) and ethylene glycol (EG) were investigated at temperatures of 288.15-333.15 K and at ambient pressure. In addition, the excess molar volume, VEm, was calculated and correlated using the Redlich-Kister polynomial equation. The temperature effect on the density of the binary systems studied was expressed by a linear two-parameter equation. The variation in density, refractive index, and viscosity with the composition was described by polynomial equations. The influence of carbon chain-length and the anion of the ionic liquids, and the influence of the temperature on the physicochemical properties of the binary systems can be explained by comparison of the experimental results.

References

Azizian, S., & Bashavard, N. (2005). Surface properties of diluted solutions of cyclohexanol and cyclopentanol in ethylene glycol. Journal of Colloid and Interface Science, 282, 428-433. DOI: 10.1016/j.jcis.2004.08.135.10.1016/j.jcis.2004.08.135Search in Google Scholar PubMed

Bahadur, I., Naidoo, P., Singh, S., Ramjugernath, D., & Deenadayalu, N. (2014). Effect of temperature on density, sound velocity, refractive index and their derived properties for the binary systems (heptanoic acid + propanoic or butanoic acids). The Journal of Chemical Thermodynamics, 78, 7-15. DOI: 10.1016/j.jct.2014.06.004.10.1016/j.jct.2014.06.004Search in Google Scholar

Bajić, D. M., Ivaniš, G. R., Visak, Z. P., Živković, E. M., Šerbanović, S. P., & Kijevčanin, M. L. (2013). Densities, viscosities, and refractive indices of the binary systems (PEG200 + 1,2-propanediol, + 1,3-propanediol) and (PEG400 + 1,2- propanediol, + 1,3-propanediol) at (288.15 to 333.15) K and atmospheric pressure: Measurements and modeling. The Journal of Chemical Thermodynamics, 57, 510-529. DOI: 10.1016/j.jct.2012.07.024.10.1016/j.jct.2012.07.024Search in Google Scholar

Blahušiak, M., & Schlosser, Š. (2014). Physical properties of phosphonium ionic liquid and its mixtures with dodecane and water. The Journal of Chemical Thermodynamics, 72, 54-64. DOI: 10.1016/j.jct.2013.12.022.10.1016/j.jct.2013.12.022Search in Google Scholar

Carnahan, J. E., Ford, T. A.,Gresham,W. F., Grigsby,W. E.,& Hager, G. F. (1955). Ruthenium-catalyzed hydrogenation of acids to alcohols. Journal of the American Chemical Society, 77, 3766-3768. DOI: 10.1021/ja01619a025.10.1021/ja01619a025Search in Google Scholar

Deetlefs, M., Seddon, K. R., & Shara, M. (2006). Neoteric optical media for refractive index determination of gems and minerals. New Journal of Chemistry, 30, 317-326. DOI: 10.1039/b513451j.10.1039/b513451jSearch in Google Scholar

Domańska, U., & Marciniak, A. (2004). Solubility of ionic liquid [Emim][PF6] in alcohols. The Journal of Physical Chemistry B, 108, 2376-2382. DOI: 10.1021/jp030582h.10.1021/jp030582hSearch in Google Scholar

Domańska, U., Papis, P., Szydłowski, J., Krolikowska, M., & Krolikowski, M. (2014). Excess enthalpies of mixing, effect of temperature and composition on the density, and viscosity and thermodynamic properties of binary systems of {ammonium-based ionic liquid + alkanediol}. The Journal of Physical Chemistry B, 118, 12692-12705. DOI: 10.1021/jp5065243.10.1021/jp5065243Search in Google Scholar PubMed

Egorov, G. I., Makarov, D. M., & Kolker, A. M. (2010). Densities and volumetric properties of ethylene glycol + dimethylsulfoxide mixtures at temperatures of (278.15 to 323.15) K and pressures of (0.1 to 100) MPa. Journal of Chemical & Engineering Data, 55, 3481-3488. DOI: 10.1021/je100089s.10.1021/je100089sSearch in Google Scholar

Fic, K., Lota, G., Meller, M., & Frackowiak, E. (2012). Novel insight into neutral medium as electrolyte for high-voltage supercapacitors. Energy & Environmental Science, 5, 5842-5850. DOI: 10.1039/c1ee02262h.10.1039/C1EE02262HSearch in Google Scholar

Fredlake, C. P., Crosthwaite, J. M., Hert, D. G., Aki, S. N. V. K., & Brennecke, J. F. (2004). Thermophysical properties of imidazolium-based ionic liquids. Journal of Chemical & Engineering Data, 49, 954-964. DOI: 10.1021/je034261a.10.1021/je034261aSearch in Google Scholar

Gómez, E., Gonzalez, B., Domínguez, Á., Tojo, E., & Tojo, J. (2006). Dynamic viscosities of a series of 1-alkyl-3- methylimidazolium chloride ionic liquids and their binary mixtures with water at several temperatures. Journal of Chemical & Engineering Data, 51, 696-701. DOI: 10.1021/ je050460d.10.1021/je050460dSearch in Google Scholar

Gómez, E., Calvar, N., Macedo, E. A., & Domínguez, Á. (2012). Effect of the temperature on the physical properties of pure 1- propyl-3-methylimidazolium bis(trifluoromethylsulfonyl) imide and characterization of its binary mixtures with alcohols. The Journal of Chemical Thermodynamics, 45, 9-15. DOI: 10.1016/j.jct.2011.08.028.10.1016/j.jct.2011.08.028Search in Google Scholar

Gao, H. Y., Qi, F., & Wang, H. J. (2009). Density and volumetric properties of binary mixtures of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate with benzaldehyde at T = (298.15 to 313.15) K. The Journal of Chemical Thermodynamics, 41, 888-892. DOI: 10.1016/j.jct.2009.02.007.10.1016/j.jct.2009.02.007Search in Google Scholar

García-Miaja, G., Troncoso, J., & Romaní, L. (2008). Excess properties for binary systems ionic liquid + ethanol: Experimental results and theoretical description using the ERAS model. Fluid Phase Equilibria, 274, 59-67. DOI: 10.1016/j.fluid.2008.09.00410.1016/j.fluid.2008.09.004Search in Google Scholar

Geppert-Rybczyńska, M., Lehmann, J. K., & Heintz, A. (2014). Physicochemical properties of two 1-alkyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide ionic liquids and of binary mixtures of 1-butyl-1-methylpyrrolidinium bis[(trifluoromethyl)sulfonyl]imide with methanol or acetonitrile. The Journal of Chemical Thermodynamics, 71, 171-181. DOI: 10.1016/j.jct.2013.12.009.10.1016/j.jct.2013.12.009Search in Google Scholar

González, B., & González, E. J. (2014). Physical properties of the pure 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl) imide ionic liquid and its binary mixtures with alcohols. The Journal of Chemical Thermodynamics, 68, 109-116. DOI: 10.1016/j.jct.2013.08.021.10.1016/j.jct.2013.08.021Search in Google Scholar

Haghtalab, A., & Shojaeian, A. (2014). Volumetric and viscometric behaviour of the binary systems of N-methyldiethanolamine and diethanolamine with 1-butyl-3-methylimidazolium acetate at various temperatures. The Journal of Chemical Thermodynamics, 68, 128-137. DOI: 10.1016/j.jct. 2013.09.001.Search in Google Scholar

Kim, Y. H., Choi, Y. K., Park, J. S., Lee, S. M., Yang, Y. H., Kim, H. J., Park, T. J., Kim, Y. H., & Lee, S. H. (2012). Ionic liquid-mediated extraction of lipids from algal biomass. Bioresource Technology, 109, 312-315. DOI: 10.1016/j.biortech.2011.04.064.10.1016/j.biortech.2011.04.064Search in Google Scholar PubMed

Kolbeck, C., Cremer, T., Lovelock, K. R. J., Paape, N., Schulz, P. S., Wasserscheid, P., Maier, F., & Steinruck, H. P. (2009). Influence of different anions on the surface composition of ionic liquids studied using ARXPS. The Journal of Physical Chemistry B, 113, 8682-8688. DOI: 10.1021/jp902978r.10.1021/jp902978rSearch in Google Scholar PubMed

Królikowska, M., Zawadzki, M., & Królikowski, M. (2014). Physicochemical and thermodynamic study on aqueous solutions of dicyanamide-based ionic liquids. The Journal of Chemical Thermodynamics, 70, 127-137. DOI: 10.1016/j.jct. 2013.10.034.Search in Google Scholar

Kumar, A., Singh, T., Gardas, R. L., & Coutinho, J. A. P. (2008). Non-ideal behaviour of a room temperature ionic liquid in an alkoxyethanol or poly ethers at T = (298.15 to 318.15) K. The Journal of Chemical Thermodynamics, 40, 32-39. DOI: 10.1016/j.jct.2007.06.002.10.1016/j.jct.2007.06.002Search in Google Scholar

Kumar, B., Singh, T., Rao, K. S., Pal, A., & Kumar, A. (2012). Thermodynamic and spectroscopic studies on binary mixtures of imidazolium ionic liquids in ethylene glycol. The Journal of Chemical Thermodynamics, 44, 121-127. DOI: 10.1016/j.jct.2011.08.008.10.1016/j.jct.2011.08.008Search in Google Scholar

Li, J. G., Hu, Y. F., Sun, S. F., Liu, Y. S., & Liu, Z. C. (2010). Densities and dynamic viscosities of the binary system (water+ 1-hexyl-3-methylimidazolium bromide) at different tem peratures. The Journal of Chemical Thermodynamics, 42, 904-908. DOI: 10.1016/j.jct.2010.03.002.10.1016/j.jct.2010.03.002Search in Google Scholar

McEwen, A. B., McDevitt, S. F., & Koch, V. R. (1997). Nonaqueous electrolytes for electrochemical capacitors: Imidazolium cations and inorganic fluorides with organic carbonates. Journal of The Electrochemical Society, 144, L84-L86. DOI: 10.1149/1.1837561.10.1149/1.1837561Search in Google Scholar

Orchillés, A. V., Miguel, P. J., Vercher, E., & Martínez- Andreu, A. (2009). Using 1-ethyl-3-methylimidazolium trifluoromethanesulfonate as an entrainer for the extractive distillation of ethanol + water mixtures. Journal of Chemical & Engineering Data, 55, 1669-1674. DOI: 10.1021/je900719z.10.1021/je900719zSearch in Google Scholar

Pal, A., Gaba, R., Singh, T., & Kumar, A. (2010). Excess thermodynamic properties of binary mixtures of ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) with alkoxyalkanols at several temperatures. Journal of Molecular Liquids, 154, 41-46. DOI: 10.1016/j.molliq.2010. 03.018.Search in Google Scholar

Pal, A., & Kumar, B. (2012). Density, speeds of sound and 1H NMR spectroscopic studies for binary mixtures of 1- hexyl-3-methylimidazolium based ionic liquids with ethylene glycol monomethyl ether at temperature from T = (288.15-318.15) K. Fluid Phase Equilibria, 334, 157-165. DOI: 10.1016/j.fluid.2012.08.002.10.1016/j.fluid.2012.08.002Search in Google Scholar

Pereiro, A. B., Araújo, J. M. M., Esperança, J. M. S. S., Marrucho, I. M., & Rebelo, L. P. N. (2012). Ionic liquids in separations of azeotropic systems - A review. The Journal of Chemical Thermodynamics, 46, 2-28. DOI: 10.1016/j.jct.2011.05.026.10.1016/j.jct.2011.05.026Search in Google Scholar

Piñeiro, A., Brocos, P., Amigo, A., Pintos, M., & Bravo, R. (2000). Prediction of excess volumes and excess surface tensions from experimental refractive indices. Physics and Chemistry of Liquids, 38, 251-260. DOI: 10.1080/003191000 08030275.Search in Google Scholar

Ruiz, V., Huynh, T., Sivakkumar, S. R., & Pandolfo, A. G. (2012). Ionic liquid-solvent mixtures as supercapacitor electrolytes for extreme temperature operation. RSC Advances, 2, 5591-5598. DOI: 10.1039/c2ra20177a.10.1039/c2ra20177aSearch in Google Scholar

Saiz, L., Padró, J., & Guàrdia, E. (2001). Structure of liquid ethylene glycol: A molecular dynamics simulation study with different force fields. The Journal of Chemical Physics, 114, 3187-3199. DOI: 10.1063/1.1340605.10.1063/1.1340605Search in Google Scholar

Salgado, J., Regueira, T., Lugo, L., Vijande, J., Fernández, J., & García, J. (2014). Density and viscosity of three (2,2,2- trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems. The Journal of Chemical Thermodynamics, 70, 101-110. DOI: 10.1016/j.jct.2013.10.027.10.1016/j.jct.2013.10.027Search in Google Scholar

Sastry, N. V., Vaghela, N. M., & Aswal, V. K. (2012). Effect of alkyl chain length and head group on surface active and aggregation behavior of ionic liquids in water. Fluid Phase Equilibria, 327, 22-29. DOI: 10.1016/j.fluid.2012.04.013.10.1016/j.fluid.2012.04.013Search in Google Scholar

Sastry, N. V., Vaghela, N. M., & Macwan, P. M. (2013). Densities, excess molar and partial molar volumes for water + 1-butyl- or, 1-hexyl- or, 1-octyl-3-methylimidazolium halide room temperature ionic liquids at T = (298.15 and 308.15) K. Journal of Molecular Liquids, 180, 12-18. DOI: 10.1016/j.molliq.2012.12.018.10.1016/j.molliq.2012.12.018Search in Google Scholar

Singh, T., & Kumar, A. (2008). Physical and excess properties of a room temperature ionic liquid (1-methyl-3- octylimidazolium tetrafluoroborate) with n-alkoxyethanols (C1Em, m = 1 to 3) at T = (298.15 to 318.15) K. The Journal of Chemical Thermodynamics, 40, 417-423. DOI: 10.1016/j.jct.2007.09.011.10.1016/j.jct.2007.09.011Search in Google Scholar

Singh, T., & Kumar, A. (2009). Temperature dependence of physical properties of imidazolium based ionic liquids: internal pressure and molar refraction. Journal of Solution Chemistry, 38, 1043-1053. DOI: 10.1007/s10953-009-9429-9.10.1007/s10953-009-9429-9Search in Google Scholar

Tariq, M., Moscoso, F., Deive, F. J., Rodriguez, A., Sanromán, M. A., Esperança, J. M. S. S., Canongia Lopes, J. N., & Rebelo, L. P. N. (2013). Probing the self-aggregation of ionic liquids in aqueous solutions using density and speed of sound data. The Journal of Chemical Thermodynamics, 59, 43-48. DOI: 10.1016/j.jct.2012.11.032.10.1016/j.jct.2012.11.032Search in Google Scholar

Torimoto, T., Tsuda, T., Okazaki, K. i., & Kuwabata, S. (2010). New frontiers in materials science opened by ionic liquids. Advanced Materials, 22, 1196-1221. DOI: 10.1002/adma. 200902184.Search in Google Scholar

Vraneš, M., Zec, N., Tot, A., Papović, S., Dožić, S., & Gadžurić, S. (2014). Density, electrical conductivity, viscosity and excess properties of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide + propylene carbonate binary mixtures. The Journal of Chemical Thermodynamics, 68, 98-108. DOI: 10.1016/j.jct.2013.08.034.10.1016/j.jct.2013.08.034Search in Google Scholar

Wang, H., Gurau, G., & Rogers, R. D. (2012). Ionic liquid processing of cellulose. Chemical Society Reviews, 41, 1519-1537. DOI: 10.1039/c2cs15311d.10.1039/c2cs15311dSearch in Google Scholar PubMed

Wetzel, F. H., Miller, J. G., & Day, A. R. (1953). Effect of structure on reactivity. VII. The energies of activation and the entropies of activation for the ammonolysis of esters1. Journal of the American Chemical Society, 75, 1150-1153. DOI: 10.1021/ja01101a042.10.1021/ja01101a042Search in Google Scholar

Xin, Q., Pfeiffer, K., Prausnitz, J. M., Clark, D. S., & Blanch, H. W. (2012). Extraction of lignins from aqueous-ionic liquid mixtures by organic solvents. Biotechnology and Bioengineering, 109, 346-352. DOI: 10.1002/bit.24337.10.1002/bit.24337Search in Google Scholar PubMed

Yang, Q. W., Zhang, H., Su, B. G., Yang, Y. W., Ren, Q. L., & Xing, H. B. (2010). Volumetric properties of binary mixtures of 1-butyl-3-methylimidazolium chloride + water or hydrophilic solvents at different temperatures. Journal of Chemical & Engineering Data, 55, 1750-1754. DOI: 10.1021/je900733j.10.1021/je900733jSearch in Google Scholar

Yang, Q. W., Yu, K., Xing, H. B., Su, B. G., Bao, Z. B., Yang, Y. W., & Ren, Q. L. (2013). The effect of molecular solvents on the viscosity, conductivity and ionicity of mixtures containing chloride anion-based ionic liquid. Journal of Industrial and Engineering Chemistry, 19, 1708-1714. DOI: 10.1016/j.jiec.2013.02.010.10.1016/j.jiec.2013.02.010Search in Google Scholar

Young, G., Nippgen, F., Titterbrandt, S., & Cooney, M. J. (2010). Lipid extraction from biomass using co-solvent mixtures of ionic liquids and polar covalent molecules. Separation and Purification Technology, 72, 118-121. DOI: 10.1016/j.seppur.2010.01.009.10.1016/j.seppur.2010.01.009Search in Google Scholar

Zorębski, E., & Waligóra, A. (2008). Densities, excess molar volumes, and isobaric thermal expansibilities for 1,2-ethanediol + 1-butanol, or 1-hexanol, or 1-octanol in the temperature range from (293.15 to 313.15) K. Journal of Chemical & Engineering Data, 53, 591-595. DOI: 10.1021/je700580g. 10.1021/je700580gSearch in Google Scholar

Received: 2015-5-22
Revised: 2015-8-13
Accepted: 2015-8-13
Published Online: 2015-12-17
Published in Print: 2016-3-1

Institute of Chemistry, Slovak Academy of Sciences

Articles in the same Issue

  1. Synthesis and properties of new N,N′-phenyltetrazole podand
  2. Molecular diagnosis of Pompe disease using MALDI TOF/TOF and 1H NMR
  3. Erythritol biosynthesis from glycerol by Yarrowia lipolytica yeast: effect of osmotic pressure
  4. Cloning and expression of two genes coding endo-β-1,4-glucanases from Trichoderma asperellum PQ34 in Pichia pastoris
  5. Adsorption desulphurisation of dimethyl sulphide using nickel-based Y zeolites pretreated by hydrogen reduction
  6. Equilibrium and kinetics of wetting hydrophobic microporous membrane in sodium dodecyl benzene sulphonate and diethanolamine aqueous solutions
  7. Separation of urea adducts in the analysis of complex mineral fertilisers
  8. Cheese whey tangential filtration using tubular mineral membranes
  9. Characterization of the quality of novel rye-buckwheat ginger cakes by chemical markers and antioxidant capacity
  10. A new high-temperature inorganic–organic proton conductor: lanthanum sulfophenyl phosphate
  11. Membranes with a plasma deposited titanium isopropoxide layer
  12. Effect of fuel content on formation of zinc aluminate nano and micro-particles synthesised by high rate sol–gel autoignition of glycine-nitrates
  13. Poly(butyl cyanoacrylate) nanoparticles stabilised with poloxamer 188: particle size control and cytotoxic effects in cervical carcinoma (HeLa) cells
  14. Solubility enhancement of phenanthrene using novel chelating surfactant
  15. Physicochemical and excess properties of binary mixtures of (1-alkyl-3-methylimidazoliumchloride/bromide + ethylene glycol) at T = (288.15 to 333.15) K
Downloaded on 27.11.2025 from https://www.degruyterbrill.com/document/doi/10.1515/chempap-2015-0211/html
Scroll to top button