Ni-based olivine-type catalysts and their application in hydrogen production via auto-thermal reforming of acetic acid
-
Ming-Shi Feng
,
Fang-Bai Zhang
Abstract
Olivine is abundant in the Earth’s upper mantle; it has applications in catalysts to enhance their stability in structures. The olivine-type catalysts were prepared by co-precipitation and hydrothermal synthesis and tested in the auto-thermal reforming (ATR) of acetic acid (AC), a model compound from bio-oil, for hydrogen production. In the meantime, the natural olivine impregnated with Ni was also tested. Characterisations of XRD, nitrogen physisorption, temperature-programmed reduction, and SEM-EDX were used to find the structure-reactivity relationship. The results indicate that the natural olivine produced a low H2 yield close to 0.17 mole of H2 per 1 mole of AC, while the olivine impregnated with Ni produced a H2 yield of from 2.19 mole to 2.73 mole of H2 per mole of AC. The olivine catalyst prepared by hydrothermal synthesis performed better in both activity and stability: the H2 yield achieved 3.06 mole of H2 per mole of AC and remained stable, which could be attributed to the higher surface area and stability with Ni inserted in the skeleton of olivine.
References
An, L., Dong, C. Q., Yang, Y. P., Zhang, J. J., & He, L. (2011). The influence of Ni loading on coke formation in steam reforming of acetic acid. Renewable Energy, 36, 930-935. DOI: 10.1016/j.renene.2010.08.029.10.1016/j.renene.2010.08.029Suche in Google Scholar
Atong, D., Pechyen, C., Aht-Ong, D., & Sricharoenchaikul, V. (2011). Synthetic olivine supported nickel catalysts for gasification of glycerol. Applied Clay Science, 53, 244-253. DOI: 10.1016/j.clay.2011.01.030.10.1016/j.clay.2011.01.030Suche in Google Scholar
Bernardi, M. I. B., Araújo, V. D., Ribeiro, C., Avansi, W., Longo, E., de Albuquerque, N. A., Meneghetti, S. M. P., Almeida, R. M., & Fajardo, H. V. (2014). Microwave hydrothermal synthesis, characterisation, and catalytic performance of Zn1−xMnxO in cellulose conversion. Chemical Papers, 68, 1213-1218. DOI: 10.2478/s11696-013-0468-8.10.2478/s11696-013-0468-8Suche in Google Scholar
Bimbela, F., Oliva, M., Ruiz, J., García, L., & Arauzo, J. (2013). Hydrogen production via catalytic steam reforming of the aqueous fraction of bio-oil using nickel-based coprecipitated catalysts. International Journal of Hydrogen Energy, 38, 14476-14487. DOI: 10.1016/j.ijhydene.2013.09.038.10.1016/j.ijhydene.2013.09.038Suche in Google Scholar
Chaubey, R., Sahu, S., James, O. O., & Maity, S. (2013). A review on development of industrial processes and emerging techniques for production of hydrogen from renewable and sustainable sources. Renewable and Sustainable Energy Reviews, 23, 443-462. DOI: 10.1016/j.rser.2013.02.019.10.1016/j.rser.2013.02.019Suche in Google Scholar
Cheah, S., Gaston, K. R., Parent, Y. O., Jarvis, M. W., Vinzant, T. B., Smith, K. M., Thornburg, N. E., Nimlos, M. R., & Magrini-Bair, K. A. (2013). Nickel cerium olivine catalyst for catalytic gasification of biomass. Applied Catalysis B: Environmental, 134-135, 34-45. DOI: 10.1016/j.apcatb.2012.12.022.10.1016/j.apcatb.2012.12.022Suche in Google Scholar
Cheng, F., & Dupont, V. (2013). Nickel catalyst auto-reduction during steam reforming of bio-oil model compound acetic acid. International Journal of Hydrogen Energy, 38, 15160-15172. DOI: 10.1016/j.ijhydene.2013.09.111.10.1016/j.ijhydene.2013.09.111Suche in Google Scholar
Courson, C., Udron, L., ´Swierczy´nski, D., Petit, C., & Kiennemann, A. (2002). Hydrogen production from biomass gasification on nickel catalysts: Tests for dry reforming of methane. Catalysis Today, 76, 75-86. DOI: 10.1016/s0920-5861(02)00202-x.10.1016/S0920-5861(02)00202-XSuche in Google Scholar
Cristiani, C., Dotelli, G., Mariani, M., Pelosato, R., & Zampori, L. (2013). Synthesis of nanostructured perovskite powders via simple carbonate co-precipitation. Chemical Papers, 67, 526-531. DOI: 10.2478/s11696-013-0306-z.10.2478/s11696-013-0306-zSuche in Google Scholar
Dachs, E., Geiger, C. A., von Seckendorff, V., & Grodzicki, M. (2007). A low-temperature calorimetric study of synthetic (forsterite + fayalite) {(Mg2SiO4 + Fe2 SiO4)} solid solutions: An analysis of vibrational, magnetic, and electronic contributions to the molar heat capacity and entropy of mixing. The Journal of Chemical Thermodynamics, 39, 906-933. DOI: 10.1016/j.jct.2006.11.009.10.1016/j.jct.2006.11.009Suche in Google Scholar
Devi, L., Craje, M., Th¨une, P., Ptasinski, K. J., & Janssen, F. J. J. G. (2005). Olivine as tar removal catalyst for biomass gasifiers: Catalyst characterization. Applied Catalysis A: General, 294, 68-79. DOI: 10.1016/j.apcata.2005.07.044.10.1016/j.apcata.2005.07.044Suche in Google Scholar
Hu, R. R., Yan, C. F., Zheng, X. X., Liu, H., & Zhou, Z. Y. (2013). Carbon deposition on Ni/ZrO2-CeO2 catalyst during steam reforming of acetic acid. International Journal of Hydrogen Energy, 38, 6033-6038. DOI: 10.1016/j.ijhydene.2012. 12.141.Suche in Google Scholar
Huang, L. H., Zhang, F. B., Chen, R. R., & Hsu, A. T. (2012). Manganese-promoted nickel/alumina catalysts for hydrogen production via auto-thermal reforming of ethanol. International Journal of Hydrogen Energy, 37, 15908-15913. DOI: 10.1016/j.ijhydene.2012.08.050.10.1016/j.ijhydene.2012.08.050Suche in Google Scholar
Huang, L. H., Liu, Q., Chen, R. R., Chu, D. R., & Hsu, A. T. (2010). Layered double hydroxide derived Co0.3Mg2.7Al1−x FexO4.5±δ catalysts for hydrogen production via autothermal reforming of bio-ethanol. Catalysis Communications, 12, 40-45. DOI: 10.1016/j.catcom.2010.05.019.10.1016/j.catcom.2010.05.019Suche in Google Scholar
Huang, L. H., Liu, Q., Chen, R. R., & Hsu, A. T. (2011). Hydrogen production via auto-thermal reforming of bioethanol: The role of iron in layered double hydroxide-derived Ni0.35Mg2.65AlO4.5±δ catalysts. Applied Catalysis A: General, 393, 302-308. DOI: 10.1016/j.apcata.2010.12.010.10.1016/j.apcata.2010.12.010Suche in Google Scholar
Hwang, C. S., & Wang, N. C. (2004). Preparation and characteristics of ferrite catalysts for reduction of CO2. Materials Chemistry and Physics, 88, 258-263. DOI: 10.1016/j. matchemphys.2004.02.028.Suche in Google Scholar
Kechagiopoulos, P. N., Voutetakis, S. S., Lemonidou, A. A., & Vasalos, I. A. (2008). Hydrogen production via reforming of the aqueous phase of bio-oil over Ni/olivine catalysts in a spouted bed reactor. Industrial & Engineering Chemistry Research, 48, 1400-1408. DOI: 10.1021/ie8013378. 10.1021/ie8013378Suche in Google Scholar
Swierczynski, D., Libs, S., Courson, C., & Kiennemann, A. (2007). Steam reforming of tar from a biomass gasification process over Ni/olivine catalyst using toluene as a model compound. Applied Catalysis B: Environmental, 74, 211-222. DOI: 10.1016/j.apcatb.2007.01.017.10.1016/j.apcatb.2007.01.017Suche in Google Scholar
Trane, R., Dahl, S., Skjøth-Rasmussen, M. S., & Jensen, A. D. (2012). Catalytic steam reforming of bio-oil. International Journal of Hydrogen Energy, 37, 6447-6472. DOI: 10.1016/j.ijhydene.2012.01.023.10.1016/j.ijhydene.2012.01.023Suche in Google Scholar
Vagia, E. C., & Lemonidou, A. A. (2007). Thermodynamic analysis of hydrogen production via steam reforming of selected components of aqueous bio-oil fraction. International Journal of Hydrogen Energy, 32, 212-223. DOI: 10.1016/j.ijhydene.2006.08.021.10.1016/j.ijhydene.2006.08.021Suche in Google Scholar
Virginie, M., Courson, C., Niznansky, D., Chaoui, N., & Kiennemann, A. (2010). Characterization and reactivity in toluene reforming of a Fe/olivine catalyst designed for gas cleanup in biomass gasification. Applied Catalysis B: Environmental, 101, 90-100. DOI: 10.1016/j.apcatb.2010.09.011.10.1016/j.apcatb.2010.09.011Suche in Google Scholar
Yang, X. Q., Xu, S. P., Xu, H. L., Liu, X. D., & Liu, C. H. (2010). Nickel supported on modified olivine catalysts for steam reforming of biomass gasification tar. Catalysis Communications, 11, 383-386. DOI: 10.1016/j.catcom.2009.11. 006.Suche in Google Scholar
Zhang, R. Q., Wang, Y. C., & Brown, R. C. (2007). Steam reforming of tar compounds over Ni/olivine catalysts doped with CeO2. Energy Conversion and Management, 48, 68-77. DOI: 10.1016/j.enconman.2006.05.001. 10.1016/j.enconman.2006.05.001Suche in Google Scholar
© Institute of Chemistry, Slovak Academy of Sciences
Artikel in diesem Heft
- Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al2O3, TiO2 and ZrO2
- Carbonylation of cyclohexene to 2-cyclohexene-1-one by montmorillonite-supported Co(II) catalysts
- Ni-based olivine-type catalysts and their application in hydrogen production via auto-thermal reforming of acetic acid
- New bulk liquid membrane oscillator composed of two coupled oscillators with diffusion-mediated physical coupling
- Reaction kinetics of malachite in ammonium carbamate solution
- Bioleaching of hazardous waste
- Antioxidative properties of Sambacus nigra extracts
- Polymeric ionic liquids: a strategy for preparation of novel polymeric materials
- Effect of process parameters on the concentration, current efficiency and energy consumption of electro-generated silver(II)
- A facile, highly efficient and novel method for synthesis of 5-substituted 1H-tetrazoles catalysed by copper(I) chloride
- A new procedure for the synthesis of 2-[(4-dodecyloxyphenyl)sulfonyl]butanoic acid
- Formation of a vanillic Mannich base – theoretical study
- Computational insights into allosteric interaction between benzoazepin-2-ones and lung cancer-associated PDK1: Implications for activator design
- Molecular dynamic studies of amyloid-beta interactions with curcumin and Cu2+ ions
Artikel in diesem Heft
- Selective catalytic oxidation of ammonia into nitrogen and water vapour over transition metals modified Al2O3, TiO2 and ZrO2
- Carbonylation of cyclohexene to 2-cyclohexene-1-one by montmorillonite-supported Co(II) catalysts
- Ni-based olivine-type catalysts and their application in hydrogen production via auto-thermal reforming of acetic acid
- New bulk liquid membrane oscillator composed of two coupled oscillators with diffusion-mediated physical coupling
- Reaction kinetics of malachite in ammonium carbamate solution
- Bioleaching of hazardous waste
- Antioxidative properties of Sambacus nigra extracts
- Polymeric ionic liquids: a strategy for preparation of novel polymeric materials
- Effect of process parameters on the concentration, current efficiency and energy consumption of electro-generated silver(II)
- A facile, highly efficient and novel method for synthesis of 5-substituted 1H-tetrazoles catalysed by copper(I) chloride
- A new procedure for the synthesis of 2-[(4-dodecyloxyphenyl)sulfonyl]butanoic acid
- Formation of a vanillic Mannich base – theoretical study
- Computational insights into allosteric interaction between benzoazepin-2-ones and lung cancer-associated PDK1: Implications for activator design
- Molecular dynamic studies of amyloid-beta interactions with curcumin and Cu2+ ions
