Startseite Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life
Artikel Open Access

Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life

  • C. Kong, , Y. Sugiyama, und C. Soutis,
Veröffentlicht/Copyright: 1. Februar 2002
Artikel downloaden (PDF)
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
Science and Engineering of Composite Materials
Aus der Zeitschrift Science and Engineering of Composite Materials Band 10 Heft 1

Published Online: 2002-02

©2011 by Walter de Gruyter GmbH & Co.

Artikel in diesem Heft

  1. TABLE OF CONTENTS
  2. Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life
  3. Investigation of Vibration Characteristics of Carbon/Epoxy Propeller Shaft for Vehicle
  4. Optical Fiber Devices Based on Nanoscale Self-Assembly
  5. Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite
  6. Analysis of Free Edge Delamination in [0m, 90n]s Composite Structures: Experimental Approach
  7. Factorization Method for Failure Mechanism Analysis of C/C and C/SiC Composites
  8. Ni-P/SiC Composite Coatings Obtained by Chemical Methods
  9. The Pretreatment of Carbon Fibres for 3D C/SiC Composites
  10. The Control of Reagents in the ICVI Process
  11. Conducting Composites as Cable Anodes in Cathodic Protection
  12. Continuity Characterization and Evaluation of Rolled Polyester Coatings on Electrolytic Plates
https://doi.org/10.1515/SECM.2002.10.1.1
Creative Commons
BY-NC-ND 3.0

Artikel in diesem Heft

  1. TABLE OF CONTENTS
  2. Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life
  3. Investigation of Vibration Characteristics of Carbon/Epoxy Propeller Shaft for Vehicle
  4. Optical Fiber Devices Based on Nanoscale Self-Assembly
  5. Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite
  6. Analysis of Free Edge Delamination in [0m, 90n]s Composite Structures: Experimental Approach
  7. Factorization Method for Failure Mechanism Analysis of C/C and C/SiC Composites
  8. Ni-P/SiC Composite Coatings Obtained by Chemical Methods
  9. The Pretreatment of Carbon Fibres for 3D C/SiC Composites
  10. The Control of Reagents in the ICVI Process
  11. Conducting Composites as Cable Anodes in Cathodic Protection
  12. Continuity Characterization and Evaluation of Rolled Polyester Coatings on Electrolytic Plates
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 19.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/SECM.2002.10.1.1/html?lang=de
Button zum nach oben scrollen