Skip to main content
Article Open Access

Conducting Composites as Cable Anodes in Cathodic Protection

  • and
Published/Copyright: February 1, 2002
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 10 Issue 1

Published Online: 2002-02

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life
  3. Investigation of Vibration Characteristics of Carbon/Epoxy Propeller Shaft for Vehicle
  4. Optical Fiber Devices Based on Nanoscale Self-Assembly
  5. Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite
  6. Analysis of Free Edge Delamination in [0m, 90n]s Composite Structures: Experimental Approach
  7. Factorization Method for Failure Mechanism Analysis of C/C and C/SiC Composites
  8. Ni-P/SiC Composite Coatings Obtained by Chemical Methods
  9. The Pretreatment of Carbon Fibres for 3D C/SiC Composites
  10. The Control of Reagents in the ICVI Process
  11. Conducting Composites as Cable Anodes in Cathodic Protection
  12. Continuity Characterization and Evaluation of Rolled Polyester Coatings on Electrolytic Plates
https://doi.org/10.1515/SECM.2002.10.1.65
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. Structural Design and Experimental Investigation of A Medium Scale Composite Wind Turbine Blade Considering Fatigue Life
  3. Investigation of Vibration Characteristics of Carbon/Epoxy Propeller Shaft for Vehicle
  4. Optical Fiber Devices Based on Nanoscale Self-Assembly
  5. Fractography of Mode I Crack Propagation in Glass Cloth/Vinylester Composite
  6. Analysis of Free Edge Delamination in [0m, 90n]s Composite Structures: Experimental Approach
  7. Factorization Method for Failure Mechanism Analysis of C/C and C/SiC Composites
  8. Ni-P/SiC Composite Coatings Obtained by Chemical Methods
  9. The Pretreatment of Carbon Fibres for 3D C/SiC Composites
  10. The Control of Reagents in the ICVI Process
  11. Conducting Composites as Cable Anodes in Cathodic Protection
  12. Continuity Characterization and Evaluation of Rolled Polyester Coatings on Electrolytic Plates
Downloaded on 19.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/SECM.2002.10.1.65/html
Scroll to top button