References

1 Janusz, C.; Typiński, F. A.; Bartłomiej, K. S.: Heat transfer in plate heat exchanger channels: Experimental validation of selected correlation equations. Archives of Thermodynamics 37 (2016) 19 –29, DOI:10.1515/aoter-2016-001710.1515/aoter-2016-0017Search in Google Scholar

2 Wiśniewski, S.; Wiśniewski, T.: Heat Transfer. WNT,Warszawa, 1994Search in Google Scholar

3 Avval, M. S.; Damangir, E.: A general correlation for determining optimum baffle spacing for all types of shell and tube exchangers. Int. J. Heat Mass Transfer 38 (1995) 2501–2506, DOI:10.1016/0017-9310(94)00358-310.1016/0017-9310(94)00358-3Search in Google Scholar

4 Smithberg, E.; Landis, F.: Friction and Forced Convection Heat-Transfer Characteristics in Tubes With Twisted Tape Swirl Generators. J. Heat Transfer 86 (1964) 39–48, DOI:10.1115/1.368706010.1115/1.3687060Search in Google Scholar

5 Migay, V. K.; Golubev, L. K.: Friction and Heat Transfer in Turbulent Swirl Flow with a Variable Swirl Generator in a Pipe. Heat Transf. Res 2 (1970) 68 –73Search in Google Scholar

6 Chen, T.;Wu,D.: Enhancement in heat transfer during condensation of an HFO refrigerant on a horizontal tube with 3D fins. Int J Thermal Sci 124 (2018) 318–326, DOI:10.1016/j.ijthermalsci.2017.10.02210.1016/j.ijthermalsci.2017.10.022Search in Google Scholar

7 Yang, S.; Chen, Y.; Wu, J.; Gu, H.: Influence of baffle configurations on flow and heat transfer characteristics of unilateral type. Applied Thermal Engineering 133 (2018) 739–748, DOI:10.1016/j.applthermaleng.2018.01.09110.1016/j.applthermaleng.2018.01.091Search in Google Scholar

8 Algifri, A. H.; Bhardwaj, R. K.; Rao, Y. V. N.: Heat transfer in turbulent decaying swirl flow in a circular pipe. Int. J. Heat Mass Transfer 31 (1988) 1563–1568, DOI:10.1016/0017-9310(88)90268-210.1016/0017-9310(88)90268-2Search in Google Scholar

9 Majidi, D.; Alighardashi, H.; Farhadi, F.: Experimental studies of heat transfer of air in a double-pipe helical heat exchanger. Appl Thermal Eng 133 (2018) 276–282, DOI:10.1016/j.applthermaleng.2018.01.05710.1016/j.applthermaleng.2018.01.057Search in Google Scholar

10 Salem, M. R.; Eltoukhey, M. B.; Ali, R. K.; Elshazly, K. M.: Experimental investigation on the hydrothermal performance of a double-pipe heat exchanger using helical tape insert. Int J Thermal Sci 124 (2018) 496–507, DOI:10.1016/j.ijthermalsci.2017.10.04010.1016/j.ijthermalsci.2017.10.040Search in Google Scholar

11 Alam, I.; Ghoshdastidar, P. S.: A study of heat transfer effectiveness of circular tubes with internal longitudinal fins having tapered lateral profiles. Int. J. Heat Mass Transfer 45 (2002) 1371–1376, DOI:10.1016/S0017-9310(01)00240-X10.1016/S0017-9310(01)00240-XSearch in Google Scholar

12 Ho, C. D.; Yeh, C. W.; Hsieh, S. M.: Improvement in device performance of multi-pass flat-plate solar air heaters with external recycle. Renew. Energy 30 (2005) 1601–1621, DOI:10.1016/j.renene.2004.11.00910.1016/j.renene.2004.11.009Search in Google Scholar

13 Jassim, E. I.: Experimental study on transient behavior of embedded spiral-coil heat exchanger. Mechanical Sciences 6 (2015) 181–190, DOI:10.5194/ms-6-181-201510.5194/ms-6-181-2015Search in Google Scholar

14 Vicente, P. G.; Garcia, A.; Viedma, A.: Mixed Convection Heat Transfer and Isothermal Pressure Drop in Corrugated Tubes for Laminar and Transition Flow. Int. Commun. Heat Mass Transfer 31 (2004) 651–662, DOI:10.1016/S0735-1933(04)00052-110.1016/S0735-1933(04)00052-1Search in Google Scholar

15 Dizaji, H. S.; Jafarmadar, S.; Mobadersani, F.: Experimental Studies on Heat Transfer and Pressure Drop Characteristics for New Arrangements of Corrugated Tubes in a Double-pipe Heat Exchanger. Int. Journal. of Thermal Sciences 96 (2015) 211–220, DOI:10.1016/j.ijthermalsci.2015.05.00910.1016/j.ijthermalsci.2015.05.009Search in Google Scholar

16 Xu, H. J.; Qu, Z. G.; Tao, W. Q.: Numerical Investigation on Self Coupling Heat Transfer in a Counter Flow Double-Pipe Heat Exchanger Filled with Metallic Foams. Applied Thermal Eng. 66 (2014) 43–54, DOI:10.1016/j.applthermaleng.2014.01.05310.1016/j.applthermaleng.2014.01.053Search in Google Scholar

17 Kumar, P. M. K.; Vijayan, V.; Kumar, B. S.; Vivek, C. M.; Dinesh, S.: Computational Analysis and Optimization of Spiral Plate Heat Exchanger. Journal of Applied Fluid Mechanics 11 (2018) 121–128, DOI:10.36884/jafm.11.SI.2942810.36884/jafm.11.SI.29428Search in Google Scholar

18 Sakthivel, P.; Srinivasan, R.; Vijayan, V.; Dinesh, S.; Lakshmanan, P.: Mathematical Model of Fluid Flow and Heat Exchanger. Thermal Science On-line first (2019) , DOI:10.2298/TSCI190412429P10.2298/TSCI190412429PSearch in Google Scholar

19 Sivaprakash, M.; Haribabu, K.; Sathish, T.; Dinesh, S.; Venkatraman, V.: Support Vector Machine for Modelling and Simulation of Heat Exchangers. Thermal Science 24 (2020) 499–503, DOI:10.2298/TSCI190419398M10.2298/TSCI190419398MSearch in Google Scholar

20 Hashemian, M.; Jafarmadar, S.; Nasiri, J.; Sadighi Dizaji, H.: Enhancement of heat transfer rate with structural modification of double pipe heat exchanger by changing cylindrical form of tubes into conical form. Appl Thermal Eng 118 (2017) 408–417, DOI:10.1016/j.applthermaleng.2017.02.09510.1016/j.applthermaleng.2017.02.095Search in Google Scholar

21 Jian, W.; Huizhu, Y.; Wang, S.; Xu, S.; Yulan, X.; Tuo, H.: Numerical investigation on baffle configuration improvement of the heat exchanger with helical baffles. Energy Convers Manag 89 (2015) 438–448, DOI:10.1016/j.enconman.2014.09.05910.1016/j.enconman.2014.09.059Search in Google Scholar

22 Jassim, E.; Faizan Ahmed, F.: Experimental assessment of Al2O3 and Cu nanofluids on the performance and heat leak of double pipe heat exchanger. Heat and Mass Transfer. 56 (2020) 1845–1858, DOI:10.1007/s00231-020-02826-910.1007/s00231-020-02826-9Search in Google Scholar

23 Hajmaideen, R. B.; Somu, S.: Design and Analysis of Double-Pipe Heat Exchanger with New Arrangements of Corrugated Tubes Using Honeycomb Arrangements. Thermal Science 24 (2020) 635–643, DOI:10.2298/TSCI190602458H10.2298/TSCI190602458HSearch in Google Scholar

24 Jumpholkul, C.; Asirvatham, L. G.; Dalkılıç, A. S.; Mahian, O.; Ahn, H. S.; Jerng, D. W.; Wongwises, S.: Experimental investigation of the heat transfer and pressure drop characteristics of SiO2/water nanofluids flowing through a circular tube equipped with free rotating swirl generators. Heat and Mass Transfer 56 (2020)1613–1626, DOI:10.1007/s00231-019-02782-z10.1007/s00231-019-02782-zSearch in Google Scholar

25 Sharma, K. V.; Sundar, L. S.; Sarma, P. K.: Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert. Int Commun Heat Mass Transf 36 (2009) 503–507, DOI:10.1016/j.icheatmasstransfer.2009.02.01110.1016/j.icheatmasstransfer.2009.02.011Search in Google Scholar

26 Zheng, L.; Xie, Y.; Zhang, D.: Numerical investigation on heat transfer performance and flow characteristics in circular tubes with dimpled twisted tapes using Al₂O₃-water nanofluid. Int J Heat and Mass Transfer 111 (2017) 962–981, DOI:10.1016/j.ijheatmasstransfer.2017.04.06210.1016/j.ijheatmasstransfer.2017.04.062Search in Google Scholar

27 Pathipakka, G.; Sivashanmugam, P.: Heat transfer behavior of nanofluids in a uniformly heated circular tube fitted with helical inserts in laminar flow. Superlattice Microst 47 (2010) 349–360, DOI:10.1016/j.spmi.2009.12.00810.1016/j.spmi.2009.12.008Search in Google Scholar

28 Chougule, S. C.; Sahu, S. K.: Heat transfer and friction characteristics of Al₂O₃/water and CNT/water nanofluids in transition flow using helical screw tape inserts – a comparative study. Chem Eng Process Process Intensif 88 (2015) 78 –88, DOI:10.1016/j.cep.2014.12.00510.1016/j.cep.2014.12.005Search in Google Scholar

29 Chandrasekar, M.; Suresh, S.; Bose, C. A.: Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under laminar flow with wire coil inserts. Exp Thermal Fluid Sci 34 (2010) 122–130, DOI:10.1016/j.expthermflusci.2009.10.00110.1016/j.expthermflusci.2009.10.001Search in Google Scholar

30 Naik, M. T.; Fahad, S. S.; Sundar, L. S.; Singh, M. K.: Comparative study on thermal performance of twisted tape and wire coil inserts in turbulent flow using CuO/water nanofluid. Exp Thermal Fluid Sci 57 (2014) 65 –76, DOI:10.1016/j.expthermflusci.2014.04.00610.1016/j.expthermflusci.2014.04.006Search in Google Scholar

31 Suresh, S.; Selvakumar, P.; Chandrasekar, M.; Raman, S. V.: (2012) Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid under turbulent flow with spiraled rod inserts. Chemical Eng Process Process Intensification 53: 24–30, DOI:10.1016/j.cep.2011.12.01310.1016/j.cep.2011.12.013Search in Google Scholar

32 Aliabadi, K. M.; Shabanpour, H.; Alizadeh, A.; Sartipzadeh, O.: Experimental assessment of different inserts inside straight tubes: Nanofluid as working media. Chemical Eng Process Process Intensification 97 (2015) 1–11, DOI:10.1016/j.cep.2015.08.00910.1016/j.cep.2015.08.009Search in Google Scholar

33 Azari, A.; Derakhshandeh, M.: An experimental comparison of convective heat transfer and friction factor of Al₂O₃ nanofluids in a tube with and without butterfly tube inserts. J Taiwan Inst Chem Eng 52 (2015) 31 –39, DOI:10.1016/j.jtice.2015.02.00910.1016/j.jtice.2015.02.009Search in Google Scholar

34 Chennu, R.; Veeredhi, V. R.: Measurement of heat transfer coefficient and pressure drops in a compact heat exchanger with lance and offset fins for water based Al₂O₃ nano-fluids. Heat and Mass Transfer 56 (2020) 257–267, DOI:10.1007/s00231-019-02707-w10.1007/s00231-019-02707-wSearch in Google Scholar

35 Chandra Sekhara Reddy, M.; Vasudeva Rao, V.: Experimental investigation of heat transfer coefficient and friction factor of ethylene glycol water based TiO₂ nanofluid in double pipe heat exchanger with and without helical coil inserts. International Communications in Heat and Mass Transfer 50 (2014) 68–76, DOI:10.1016/j.icheatmasstransfer.2013.11.00210.1016/j.icheatmasstransfer.2013.11.002Search in Google Scholar

36 Chandra Sekhara Reddy, M.; Vasudeva Rao, V.: Experimental studies on thermal conductivity of blends of ethylene glycol-water based TiO₂ nanofluids. International Communications in Heat and Mass Transfer 46 (2013) 31 –36, DOI:10.1016/j.icheatmasstransfer.2013.05.00910.1016/j.icheatmasstransfer.2013.05.009Search in Google Scholar

37 Mohammed, H. A.; Bhaskaran, G.; Shuaib, N. H.; Saidur, R.: Heat transfer and fluid flow characteristics in microchannels heat exchangern using nanofluids: A review. Renew Sust Energ Rev 15 (2011) 1502–1512, DOI:10.1016/j.rser.2010.11.03110.1016/j.rser.2010.11.031Search in Google Scholar

38 Pantzali, M. N.; Kanaris, A. G.; Antoniadis, K. D.; Mouza, A. A.; Paras, S. V.: Effect of nanofluids on the performance of a miniature plate heat exchanger with modulated surface. Int J Heat Fluid Flow 30 (2009) 691–699, DOI:10.1016/j.ijheatfluidflow.2009.02.00510.1016/j.ijheatfluidflow.2009.02.005Search in Google Scholar

39 Huang, D.; Wub, Z.; Sunden, B.: Effects of hybrid nanofluid mixture in plate heat exchangers. Exp Thermal Fluid Sci 72 (2016) 190–196, DOI:10.1016/j.expthermflusci.2015.11.00910.1016/j.expthermflusci.2015.11.009Search in Google Scholar

40 Rashidi, M. M.; Hosseini, A.; Pop, I.; Kumar, S.; Freidoonimehr, N.: Comparative numerical study of single and two-phase models of nanofluid heat transfer in wavy channel. Appl Math Mech 35 (2014) 831–848, DOI:10.1007/s10483-014-1839-910.1007/s10483-014-1839-9Search in Google Scholar

41 Naphon, P.; Arisariyawong, T.; Nualboonrueng, T.: Nanofluids heat transfer and flow analysis in vertical spirally coiled tubes using Eulerian two-phase turbulent model. Heat Mass Transfer 53 (2017) 2297–2308, , DOI:10.1007/s00231-017-1977-810.1007/s00231-017-1977-8Search in Google Scholar

42 Natarajan, A.; Venkatesh, R.; Gobinath, S.; Devakumar, L.; Gopalakrishnan, K.: CFD simulation of heat transfer enhancement in circular tube with twisted tape insert by using nanofluids. Mater Today Proc. (2019), 2019.06.717, DOI:10.1016/j.matpr.2019.06.71710.1016/j.matpr.2019.06.717Search in Google Scholar

43 Zheng, M.; Han, D.; Asif, F.; Si, Z.: Effect of Al2O3/water nanofluid on heat transfer of turbulent flow in the inner pipe of a double-pipe heat exchanger. Heat and Mass Transfer 56 (2020) 1127–1140, DOI:10.1007/s00231-019-02774-z10.1007/s00231-019-02774-zSearch in Google Scholar

44 Qasim, M.; Kamran, M. S.; Ammar, M.; Jamal, M. A.;, M. Y.: Heat Transfer Enhancement of an Automobile Engine Radiator using ZnO Water Base Nanofluids. J. Thermal Sci. 29 (2020) 1010–1024, DOI:10.1007/s11630-020-1263-910.1007/s11630-020-1263-9Search in Google Scholar

45 Holman, J. P.; Gajda, W. J.: Experimental methods for engineers 2. McGraw-Hill, New York 2001Search in Google Scholar