Zum Hauptinhalt springen
Artikel Open Access

Hierarchical Structure of Aluminium Foams and Relation to Compression Behaviour

  • , , , und
Veröffentlicht/Copyright: 6. Mai 2011
Artikel downloaden (PDF)
High Temperature Materials and Processes
Aus der Zeitschrift High Temperature Materials and Processes Band 26 Heft 4

Published Online: 2011-05-06
Published in Print: 2007-08

©2011 by Walter de Gruyter GmbH & Co.

Artikel in diesem Heft

  1. TABLE OF CONTENTS
  2. Preface
  3. Metal Foams with Advanced Pore Morphology (APM)
  4. Improvements in Stabilisation and Cellular Structure of Al based Foams with Novel Carbonate Foaming Agent
  5. Effect of Titanium Hydride Powder Characteristics and Aluminium Alloy Composition on Foaming
  6. Fabrication of Micro Porous Metal Components by Metal Injection Molding Based Powder Space Holder Method
  7. Application of Reticulated Metal Foam to Gas Fired Infrared Burners
  8. Effect of Particle Addition to Liquid Metal on Fabrication of Aluminum Foam
  9. The Spark Plasma Sintering Method Using Laminated Titanium Powder Sheet for Fabricating Porous Biocompatible Implants
  10. Hierarchical Structure of Aluminium Foams and Relation to Compression Behaviour
  11. Fabrication of Lotus-type Porous NiTi Shape Memory Alloys using the Continuous Zone Melting Method and Tensile Property
  12. Fabrication of Lotus-Type Porous Magnesium and its Alloys by Unidirectional Solidification under Hydrogen Atmosphere
https://doi.org/10.1515/HTMP.2007.26.4.291
Creative Commons
BY-NC-ND 3.0

Artikel in diesem Heft

  1. TABLE OF CONTENTS
  2. Preface
  3. Metal Foams with Advanced Pore Morphology (APM)
  4. Improvements in Stabilisation and Cellular Structure of Al based Foams with Novel Carbonate Foaming Agent
  5. Effect of Titanium Hydride Powder Characteristics and Aluminium Alloy Composition on Foaming
  6. Fabrication of Micro Porous Metal Components by Metal Injection Molding Based Powder Space Holder Method
  7. Application of Reticulated Metal Foam to Gas Fired Infrared Burners
  8. Effect of Particle Addition to Liquid Metal on Fabrication of Aluminum Foam
  9. The Spark Plasma Sintering Method Using Laminated Titanium Powder Sheet for Fabricating Porous Biocompatible Implants
  10. Hierarchical Structure of Aluminium Foams and Relation to Compression Behaviour
  11. Fabrication of Lotus-type Porous NiTi Shape Memory Alloys using the Continuous Zone Melting Method and Tensile Property
  12. Fabrication of Lotus-Type Porous Magnesium and its Alloys by Unidirectional Solidification under Hydrogen Atmosphere
Heruntergeladen am 19.4.2026 von https://www.degruyterbrill.com/document/doi/10.1515/HTMP.2007.26.4.291/html?lang=de
Button zum nach oben scrollen