Article
Open Access
SEM and TEM Investigations on a Cr-Ni-Co Superalloy
-
Havva Kazdal Zeytin,
Published/Copyright:
May 6, 2011
Published Online: 2011-05-06
Published in Print: 2000-03
©2011 by Walter de Gruyter GmbH & Co.
Articles in the same Issue
- TABLE OF CONTENTS
- Synergistic Effects of Surface Micro-Crystallisation and Ce Addition on Selective Oxidation of Ni-20Cr Alloy
- Directionally Solidified Ti-48Al-2Cr-2Nb Made By Power Down or Bridgeman Processing
- Microstructure of Directionally Solidified Ti-52Al-2W-0.5Si Intermetallic
- The Peculiarities of Tungsten's Influence on Phase Transformations and Mechanical Properties of the Directionally Solidified HCR Nickel-Base Alloy
- Theoretical Estimation of the Solubility of Oxygen in Silicon Melt
- Oxidation of Powder Metallurgical Ag-Cr Alloys in 1 Atm O2 At 700-800° C
- Aspects of the Tempering Transformation Kinetics of Cr Low Alloyed Steels
- SEM and TEM Investigations on a Cr-Ni-Co Superalloy
- A Comparison of Creep Rupture Behaviour of 2.25Cr-1Mo and 9Cr-1Mo Steels and Their Weld Joints
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- TABLE OF CONTENTS
- Synergistic Effects of Surface Micro-Crystallisation and Ce Addition on Selective Oxidation of Ni-20Cr Alloy
- Directionally Solidified Ti-48Al-2Cr-2Nb Made By Power Down or Bridgeman Processing
- Microstructure of Directionally Solidified Ti-52Al-2W-0.5Si Intermetallic
- The Peculiarities of Tungsten's Influence on Phase Transformations and Mechanical Properties of the Directionally Solidified HCR Nickel-Base Alloy
- Theoretical Estimation of the Solubility of Oxygen in Silicon Melt
- Oxidation of Powder Metallurgical Ag-Cr Alloys in 1 Atm O2 At 700-800° C
- Aspects of the Tempering Transformation Kinetics of Cr Low Alloyed Steels
- SEM and TEM Investigations on a Cr-Ni-Co Superalloy
- A Comparison of Creep Rupture Behaviour of 2.25Cr-1Mo and 9Cr-1Mo Steels and Their Weld Joints
