Enhancing dewatering of thermo-mechanical pulp (TMP) based papermaking through enzymatic treatment
-
,
Abstract
The aim of this work was to improve the dewatering characteristics of thermo-mechanical pulp (TMP) through enzymatic treatment without any significant reduction of the quality of the end product. The cellulose and hemicellulose content of TMP was altered by means of enzymatic treatments using different purified cellulases and hemicellulases as well as commercial enzyme preparations, in order to clarify the target carbohydrate components affecting the dewatering of TMP. The effects of enzymatic treatments on the properties of the pulp as well as its forming, pressing and drying were studied by lab scale measurements. An increased dewatering rate of TMP was observed in initial drainage, wet pressing and drying laboratory experiments, as a result of various enzymatic treatments. Interestingly, both cellulose and galactoglucomannan components in TMP were found to affect the dewatering properties of the pulp, and a greatest improvement in dewatering could be obtained with a combined treatment with an endoglucanase type of cellulase and mannanase.
©2011 by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Original Papers
- Fundamental understanding of pulp property development under different thermomechanical pulp refining conditions as observed by a new Simons’ staining method and SEM observation of the ultrastructure of fibre surfaces
- Enhancing dewatering of thermo-mechanical pulp (TMP) based papermaking through enzymatic treatment
- Mechanisms of TMP peroxide bleaching using Mg-based alkalis
- Properties of wood chips for thermomechanical pulp (TMP) production as a function of spout angle
- Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulation
- Combined bound water and water vapour diffusion of Norway spruce and European beech in and between the principal anatomical directions
- Oxygen plasma-treated enzymatic hydrolysis lignin as a natural binder for manufacturing biocomposites
- Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers
- Characterizing perpendicular-to-grain compression (C⊥) behavior in wood construction
- Predicting the strength of Populus spp. clones using artificial neural networks and ε-regression support vector machines (ε-rSVM)
- X-ray scattering and microtomography study on the structural changes of never-dried silver birch, European aspen and hybrid aspen during drying
- Equilibrium moisture content (EMC) in Norway spruce during the first and second desorptions
- Fungal degradation of bamboo samples
- qPCR as a tool to study basidiomycete colonization in wooden field stakes
- Meetings
- Meetings
Articles in the same Issue
- Original Papers
- Fundamental understanding of pulp property development under different thermomechanical pulp refining conditions as observed by a new Simons’ staining method and SEM observation of the ultrastructure of fibre surfaces
- Enhancing dewatering of thermo-mechanical pulp (TMP) based papermaking through enzymatic treatment
- Mechanisms of TMP peroxide bleaching using Mg-based alkalis
- Properties of wood chips for thermomechanical pulp (TMP) production as a function of spout angle
- Determination of local material properties of OSB sample by coupling advanced imaging techniques and morphology-based FEM simulation
- Combined bound water and water vapour diffusion of Norway spruce and European beech in and between the principal anatomical directions
- Oxygen plasma-treated enzymatic hydrolysis lignin as a natural binder for manufacturing biocomposites
- Influence of the adhesive formulation on the mechanical properties and bonding performance of polyurethane prepolymers
- Characterizing perpendicular-to-grain compression (C⊥) behavior in wood construction
- Predicting the strength of Populus spp. clones using artificial neural networks and ε-regression support vector machines (ε-rSVM)
- X-ray scattering and microtomography study on the structural changes of never-dried silver birch, European aspen and hybrid aspen during drying
- Equilibrium moisture content (EMC) in Norway spruce during the first and second desorptions
- Fungal degradation of bamboo samples
- qPCR as a tool to study basidiomycete colonization in wooden field stakes
- Meetings
- Meetings
