Startseite Naturwissenschaften Chapter 9. Study on mechanical properties of Himalayacalamus falconeri fiber-reinforced polylactic acid composites
Kapitel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Chapter 9. Study on mechanical properties of Himalayacalamus falconeri fiber-reinforced polylactic acid composites

  • Pawan Kumar Rakesh , Mayank Pokhriyal , Shaurya Bhatt und Vivek Bahuguna
Veröffentlichen auch Sie bei De Gruyter Brill
Erkunden Sie dieses Fachgebiet So veröffentlichen Sie bei uns
Polylactic Acid Composites
Ein Kapitel aus dem Buch Polylactic Acid Composites

Abstract

The usage of synthetic fiber-based reinforced plastics has raised environmental health concerns leading governments worldwide to establish strict ecological regulations, increasing the demand for sustainable and eco-friendly products. As a result, the scientific community is focusing on developing materials of natural origin that are recyclable, renewable, and have minimal environmental impact. PLA-based matrices reinforced with short Himalayacalamus falconeri fiber are used to create completely. Therefore, to ensure the environmental sustainability and economic feasibility of these bio composites, an appropriate fabrication technique with minimum processing time must be considered.

Abstract

The usage of synthetic fiber-based reinforced plastics has raised environmental health concerns leading governments worldwide to establish strict ecological regulations, increasing the demand for sustainable and eco-friendly products. As a result, the scientific community is focusing on developing materials of natural origin that are recyclable, renewable, and have minimal environmental impact. PLA-based matrices reinforced with short Himalayacalamus falconeri fiber are used to create completely. Therefore, to ensure the environmental sustainability and economic feasibility of these bio composites, an appropriate fabrication technique with minimum processing time must be considered.

Kapitel in diesem Buch

  1. Frontmatter I
  2. Contents V
  3. Contributing authors VII
  4. Chapter 1. Processing on polylactic acid and its applications 1
  5. Chapter 2. Polylactic acid-agave fiber biocomposites: processing, properties, weathering performance, and biodegradation 13
  6. Chapter 3. Polylactic acid composite materials for packaging and the consumption of food products 31
  7. Chapter 4. Antibacterial properties of polylactic acid composites for food packaging 73
  8. Chapter 5. Barrier properties of polylactic acid 101
  9. Chapter 6. Heat-sealing properties of polylactic acid and polylactic acid composites 123
  10. Chapter 7. Reactive extrusion of polylactic acid 141
  11. Chapter 8. Surface properties of polylactic acid–based composites 163
  12. Chapter 9. Study on mechanical properties of Himalayacalamus falconeri fiber-reinforced polylactic acid composites 181
  13. Chapter 10. The fabrication process of the pine needle fiber-reinforced polylactic acid composites 217
  14. Chapter 11. Development of novel hybrid green polymer composites (HGPC) with a combination of biowaste material as fillers 227
  15. Chapter 12. Joining behavior of bio-filler-based polyester composites 257
  16. Chapter 13. Dimensional analysis of 3D-printed knuckle joint and bearing pillow block 271
  17. Chapter 14. Processing and applications of silk fiber-reinforced biocomposite for tissue engineering 289
  18. Chapter 15. The development of silk fiber-, jute fiber-, Grewia optiva fiber-reinforced biopolymer composites 303
  19. Chapter 16. Machinability characteristics of pine needle fiber-reinforced polylactic acid composites 321
  20. Index 331
https://doi.org/10.1515/9783111067285-009

Kapitel in diesem Buch

  1. Frontmatter I
  2. Contents V
  3. Contributing authors VII
  4. Chapter 1. Processing on polylactic acid and its applications 1
  5. Chapter 2. Polylactic acid-agave fiber biocomposites: processing, properties, weathering performance, and biodegradation 13
  6. Chapter 3. Polylactic acid composite materials for packaging and the consumption of food products 31
  7. Chapter 4. Antibacterial properties of polylactic acid composites for food packaging 73
  8. Chapter 5. Barrier properties of polylactic acid 101
  9. Chapter 6. Heat-sealing properties of polylactic acid and polylactic acid composites 123
  10. Chapter 7. Reactive extrusion of polylactic acid 141
  11. Chapter 8. Surface properties of polylactic acid–based composites 163
  12. Chapter 9. Study on mechanical properties of Himalayacalamus falconeri fiber-reinforced polylactic acid composites 181
  13. Chapter 10. The fabrication process of the pine needle fiber-reinforced polylactic acid composites 217
  14. Chapter 11. Development of novel hybrid green polymer composites (HGPC) with a combination of biowaste material as fillers 227
  15. Chapter 12. Joining behavior of bio-filler-based polyester composites 257
  16. Chapter 13. Dimensional analysis of 3D-printed knuckle joint and bearing pillow block 271
  17. Chapter 14. Processing and applications of silk fiber-reinforced biocomposite for tissue engineering 289
  18. Chapter 15. The development of silk fiber-, jute fiber-, Grewia optiva fiber-reinforced biopolymer composites 303
  19. Chapter 16. Machinability characteristics of pine needle fiber-reinforced polylactic acid composites 321
  20. Index 331
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 20.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/9783111067285-009/html
Button zum nach oben scrollen