Home High-Strength Mg-Based Bulk Metallic Glass Composites with Remarkable Plasticity
Article
Licensed
Unlicensed Requires Authentication

High-Strength Mg-Based Bulk Metallic Glass Composites with Remarkable Plasticity

  • Erlin Zhang and Mingzhen Ma
Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 100 Issue 5

Abstract

The paper presents a novel porous, ductile, V particles reinforced, Mg-based metallic glass composite, exhibiting superior mechanical performance with up to 10 % compressive strain and 1100 MPa stress at room temperature. Indentation tests show that the addition of V particles can improve significantly the plastic deformation ability of the glass composites in local regions around the particles. Furthermore, during deformation process, the highly localized shear-banding of the infiltrated glassy matrix within the porous V particles induces an increase in temperature in local regions, where the dilating and softening behavior happen. The heated V particle regions become more effective “sites” for the initiation and arrest of shear bands in the surrounding amorphous matrix. We suggest that porous ductile particles might therefore preferably be used to toughen amorphous materials with stubborn brittleness.

Keywords: Mg alloy, Bulk metallic glass; Porous particle reinforcement; Vanadium; Toughening
* Correspondence address, Prof. Erlin Zhang, 72 Wenhua Road, Institute of Metal Research, Chinese Academy of Sciences, 110016 Shenyang, P.R. China, Tel./Fax: +86 24 2397 1605, E-mail:

References

[1] A.Inoue, T.Masumoto: Mater. Sci. Eng. A133 (1991) 6.Search in Google Scholar

[2] H.Ma, J.Xu, E.Ma: Appl. Phys. Lett.83 (2003) 2793.Search in Google Scholar

[3] X.Hui, W.Dong, G.L.Chen, K.F.Yao: Acta Mater.55 (2007) 907.Search in Google Scholar

[4] K.Amiya, A.Inoue: Mater. Trans. JIM41 (2000) 1460.Search in Google Scholar

[5] H.Men, D.H.Kim: J. Mater. Res.18 (2003) 641.Search in Google Scholar

[6] A.Inoue, N.Nishiyama, H.Kimura: Mater. Trans. JIM38 (1997) 179.Search in Google Scholar

[7] G.Yuan, A.Inoue: J. Alloys Compd.387 (2005) 134.Search in Google Scholar

[8] Q.Zheng, H.Ma, E.Ma, J.Xu: Scr. Mater.55 (2006) 541.Search in Google Scholar

[9] D.G.Pan, H.F.Zhang, A.M.Wang, Z.Q.Hu: Appl. Phys. Lett.89 (2006) 261904.Search in Google Scholar

[10] Y.K.Xu, H.Ma, J.Xu, E.Ma: Acta Mater.53 (2005) 1857.Search in Google Scholar

[11] H.Ma, L.L.Shi, J.Xu, Y.Li, E.Ma: Appl. Phys. Lett.87 (2005) 181915.Search in Google Scholar

[12] A.H.Brothers, D.C.Dunand, Q.Zheng, J.Xu: J. Appl. Phys.102 (2007) 023508.Search in Google Scholar

[13] T.C.Hufnagel, C.Fan, R.T.Ott, J.Li, S.Brennan: Intermetallics10 (2002) 1163.Search in Google Scholar

[14] J.Das, M.B.Tang, K.B.Kim, R.Theissmann, F.Baier, W.H.Wang, J.Eckert: Phys. Rev. Lett.94 (2005) 205501.Search in Google Scholar

[15] A.Inoue, W.Zhang, T.Tsurui, A.R.Yavari, A.L.Greer: Philos. Mag. Lett.85 (2005) 221.Search in Google Scholar

[16] M.L.Lee, Y.Li, C.A.Schuh: Acta Mater.52 (2004) 4121.10.1016/j.actamat.2009.02.002Search in Google Scholar

[17] W.Löser, J.Das, A.Güth, H.J.Klauß, C.Mickel, U.Kühn, J.Eckert, S.K.Roy, L.Schultz: Intermetallics12 (2004) 1153.Search in Google Scholar

[18] Y.H.Liu, G.Wang, R.J.Wang, D.Q.Zhao, M.X.Pan, W.H.Wang: Science315 (2007) 1385.10.1145/1375783.1375819Search in Google Scholar

[19] X.H.Du, J.C.Huang, K.C.Hsieh, Y.H.Lai, H.M.Chen, J.S.C.Jang, P.K.Liaw: Appl. Phys. Lett.91 (2007) 131901.10.1063/1.2396923Search in Google Scholar

[20] C.A.Volkert, N.Cordero, E.T.Lilleodden, A.Donohue, F.Spaepen, in: E.Lilleodden, P.Besser, L.Levine, A.Needleman (Eds.), Mater. Res. Soc. Symp. Proc., Vol. 976E, Materials Research Society, Warrendale (2007) 0976-EE11-01.Search in Google Scholar

[21] F.Spaepen, in: L.Thilly, N.R.Moody, A.Misra, P.M.Anderson, M.Kumar (Eds.), Mater. Res. Soc. Symp. Proc., Vol. 977E, Materials Research Society, Warrendale (2007).Search in Google Scholar

[22] Q.Zheng, H.Ma, E.Ma, J.Xu: Scr. Mater.55 (2006) 541.Search in Google Scholar

[23] Y.F.Xue, H.N.Cai, L.Wang, F.C.Wang, H.F.Zhang: Mater. Sci. Eng. A445 (2007) 275.Search in Google Scholar

[24] Metal Handbooks, Desk editions, American Society for Metals, Metals Park, OH (1985)Search in Google Scholar

[25] Z.P.Lu, C.T.Liu: Intermetallics12 (2004) 1035.10.3724/SP.J.1077.2008.00607Search in Google Scholar

[26] X.H.Du, J.C.Huang, C.T.Liu, P.Lu: Jap. J. Appl. Phys.101 (2007) 086108.Search in Google Scholar

[27] G.He, J.Eckert, W.Loser: Acta Mater.51 (2003) 1621.Search in Google Scholar

[28] C.Fan, H.Q.Li, K.X.Tao, H.Choo, P. K.Liaw, C.T.Liu: Phys. Rev. Lett.96 (2006) 145506.10.1103/PhysRevLett.64.3203.2Search in Google Scholar

[29] A.C.Lund, C.A.Schuh: Intermetallics12 (2004) 1159.10.1016/0022-3115(65)90099-1Search in Google Scholar

Received: 2008-4-3
Accepted: 2008-12-12
Published Online: 2013-06-11
Published in Print: 2009-05-01

© 2009, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Feature
  4. Nd–Fe–B permanent magnets a quarter century later: implications for patentability
  5. Micromagnetism of advanced hard magnetic materials
  6. Magnetism of nanostructured materials for advanced magnetic recording
  7. Basic
  8. A Study of the Al–Mg–B Ternary Phase Diagram
  9. Effects of Lanthanum on Magnetic Behavior and Hardness of Electroless Ni–Fe–P Deposits
  10. Interfacial Reactions between Lead-Free Solders and the Multilayer Au/Ni/SUS304 Substrate
  11. Melting Behavior of Sn–Bi Alloy Powder Compacts Observed Using Optical Dilatometry
  12. High-Strength Mg-Based Bulk Metallic Glass Composites with Remarkable Plasticity
  13. Determination of Liquidus Temperature in Sn–Ti–Zr Alloys by Viscosity, Electrical Conductivity and XRD Measurements
  14. The coupled FEM analysis of super-high angular speed polishing of diamond films
  15. Applied
  16. Comparison of Depth-Sensing Indentation at Ultramicroscopic Contacts by Single- and Multiple-Partial-Unload Cycles
  17. Sintering Behavior of ZnO: Mn Ceramics Fabricated from Sol-Gel Derived Nanocrystalline powders
  18. Suitability of Maraging Steel Weld Cladding for Repair of Die-Casting Tooling
  19. Enhanced properties of functionally graded Cu–Cr powder compacts
  20. Influence of Cr on the microstructure and mechanical properties of Ti–Si Eutectic Alloys
  21. Notifications
  22. DGM News
https://doi.org/10.3139/146.110085
Keywords for this article
Mg alloy, Bulk metallic glass; Porous particle reinforcement; Vanadium; Toughening

Articles in the same Issue

  1. Contents
  2. Contents
  3. Feature
  4. Nd–Fe–B permanent magnets a quarter century later: implications for patentability
  5. Micromagnetism of advanced hard magnetic materials
  6. Magnetism of nanostructured materials for advanced magnetic recording
  7. Basic
  8. A Study of the Al–Mg–B Ternary Phase Diagram
  9. Effects of Lanthanum on Magnetic Behavior and Hardness of Electroless Ni–Fe–P Deposits
  10. Interfacial Reactions between Lead-Free Solders and the Multilayer Au/Ni/SUS304 Substrate
  11. Melting Behavior of Sn–Bi Alloy Powder Compacts Observed Using Optical Dilatometry
  12. High-Strength Mg-Based Bulk Metallic Glass Composites with Remarkable Plasticity
  13. Determination of Liquidus Temperature in Sn–Ti–Zr Alloys by Viscosity, Electrical Conductivity and XRD Measurements
  14. The coupled FEM analysis of super-high angular speed polishing of diamond films
  15. Applied
  16. Comparison of Depth-Sensing Indentation at Ultramicroscopic Contacts by Single- and Multiple-Partial-Unload Cycles
  17. Sintering Behavior of ZnO: Mn Ceramics Fabricated from Sol-Gel Derived Nanocrystalline powders
  18. Suitability of Maraging Steel Weld Cladding for Repair of Die-Casting Tooling
  19. Enhanced properties of functionally graded Cu–Cr powder compacts
  20. Influence of Cr on the microstructure and mechanical properties of Ti–Si Eutectic Alloys
  21. Notifications
  22. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 2.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110085/html
Scroll to top button