Article
Licensed
Unlicensed
Requires Authentication
Conceptual Screening of Reactive Extraction Processing Options
-
Daniel Montolio-Rodriguez
Published/Copyright:
April 9, 2010
Multi-phase superstructure optimization formulations for reactive extraction systems are often difficult to initialize and time consuming and solve. That is why such formulations, which capture detailed reaction and mass transfer phenomena, should only be employed for cases in which reactive extraction turns out to be a promising option. However, in systems with complex kinetics it is often non-obvious whether reactive extraction would enhance the performance of the system. The optimisation efforts can be minimised with the help of high-level models to screen the potential of the reactive extraction option prior to the detailed optimal process synthesis stage. This paper presents a conceptual optimisation formulation to establish the potential of reactive separations prior to complex detailed optimisation tasks. The conceptual approach supports high-level decision-making in early stages of design and allows to identify whether reactive extraction processes constitute promising design options for a given reaction system. The approach is illustrated with two biochemical examples of different complexity.
Keywords: process synthesis; optimization; reactor network synthesis; reactive extraction; conceptual screening
Published Online: 2010-4-9
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Article
- Influence of Temperature and Pressure on the Non-Catalytic Partial Oxidation of Natural Gas
- CFD Simulation of Hydraulics of Sieve Trays with Gas Mal-Distribution
- Experimental Measurement and Modeling of Diffusion Anomalies in a CMS Membrane
- Moisture Diffusivity and Energy Consumption during Microwave Drying of Plaster of Paris
- Optimization studies on Biosorption of Copper (II) by Crab Shell Using Response Surface Methodology(RSM)
- Simulation and Control of a Commercial Double Effect Evaporator: Tomato Juice
- Novel PCA-Based Technique for Identification of Dominant Variables for Partial Control
- Search for Optimal Design of Multiproduct Batch Plants under Uncertain Demand using Gaussian Process Modeling Solved by Heuristics Methods
- Adsorption of Crude Oil Using Meshed Groundnut Husk
- Revisiting Reaction-Diffusion Process in a Porous Catalyst: Improving the Adomian Solution
- Combining Design of Experiments Techniques, Connectionist Models, and Optimization for the Efficient Design of New Product Formulations
- Simulation and Analysis of Multi-scale Transport Phenomena and Catalytic Reactions in SOFC Anodes
- Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis
- A Fault Detection and Diagnosis Strategy for Batch/Semi-Batch Processes
- Kinetic Study and Modeling of Aerobic Biological Oxidation of Organic Wastewater
- Conceptual Screening of Reactive Extraction Processing Options
- Production of p-Anisic Acid by Modified Williamson Etherification Reaction Using Design of Experiments
- Empty Spray Sections of Vacuum Towers: Heat and Mass Transfer with a CFD approach
- Influence of Phase Compositions, pH and Temperature on Bovine Serum Albumin Partitioning in Aqueous Biphasic System
- Separation of Organic Chlorine Compounds through Batch Distillation Process
- Modeling of Infrared Drying of Polymer Solutions
- An Object-Oriented Graphics Interface Simulator for Analysis of Fischer-Tropsch Synthesis
- CFD Simulation of Wall Effects in Flow Past a Square Cylinder in a Stationary and Moving Plane Channel
- Axial Variation of Mass Transfer Volumetric Coefficients in Bubble Column Bioreactors
- Thermodynamics of Supercritical Fluid Extraction of Some Dyes and Pharmaceutical Compounds Using the Weighting Matrix Approach
- Study of Numerous Injections into Horizontal Flow Stream at Low Temperature
- Bayesian Network Method for Fault Diagnosis in a Continuous Tubular Reactor
- Isotherm and Kinetics Modeling of Fluoride Removal from Industrial Effluent by Alumina
- Effect of Temperature and Catalyst Concentrations on the Thermal Properties of Polyamide Adhesives at Low Operating Pressure
- Microfluidics of Nanodrug Delivery at Different Angles of Drug Injection
- Optimization of Process Variables for Amylase Production Using Agro Residual Wastes by Taguchi Methodology
- Sorption of Acid Blue 9 on to Wheat Bran: Optimization, Equilibrium and Kinetic Studies
- Review
- Safety Improvement and Operational Enhancement via Dynamic Process Simulator: A Review
- Review of Life Cycle Assessment in Agro-Chemical Processes
Keywords for this article
process synthesis;
optimization;
reactor network synthesis;
reactive extraction;
conceptual screening
Articles in the same Issue
- Article
- Influence of Temperature and Pressure on the Non-Catalytic Partial Oxidation of Natural Gas
- CFD Simulation of Hydraulics of Sieve Trays with Gas Mal-Distribution
- Experimental Measurement and Modeling of Diffusion Anomalies in a CMS Membrane
- Moisture Diffusivity and Energy Consumption during Microwave Drying of Plaster of Paris
- Optimization studies on Biosorption of Copper (II) by Crab Shell Using Response Surface Methodology(RSM)
- Simulation and Control of a Commercial Double Effect Evaporator: Tomato Juice
- Novel PCA-Based Technique for Identification of Dominant Variables for Partial Control
- Search for Optimal Design of Multiproduct Batch Plants under Uncertain Demand using Gaussian Process Modeling Solved by Heuristics Methods
- Adsorption of Crude Oil Using Meshed Groundnut Husk
- Revisiting Reaction-Diffusion Process in a Porous Catalyst: Improving the Adomian Solution
- Combining Design of Experiments Techniques, Connectionist Models, and Optimization for the Efficient Design of New Product Formulations
- Simulation and Analysis of Multi-scale Transport Phenomena and Catalytic Reactions in SOFC Anodes
- Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis
- A Fault Detection and Diagnosis Strategy for Batch/Semi-Batch Processes
- Kinetic Study and Modeling of Aerobic Biological Oxidation of Organic Wastewater
- Conceptual Screening of Reactive Extraction Processing Options
- Production of p-Anisic Acid by Modified Williamson Etherification Reaction Using Design of Experiments
- Empty Spray Sections of Vacuum Towers: Heat and Mass Transfer with a CFD approach
- Influence of Phase Compositions, pH and Temperature on Bovine Serum Albumin Partitioning in Aqueous Biphasic System
- Separation of Organic Chlorine Compounds through Batch Distillation Process
- Modeling of Infrared Drying of Polymer Solutions
- An Object-Oriented Graphics Interface Simulator for Analysis of Fischer-Tropsch Synthesis
- CFD Simulation of Wall Effects in Flow Past a Square Cylinder in a Stationary and Moving Plane Channel
- Axial Variation of Mass Transfer Volumetric Coefficients in Bubble Column Bioreactors
- Thermodynamics of Supercritical Fluid Extraction of Some Dyes and Pharmaceutical Compounds Using the Weighting Matrix Approach
- Study of Numerous Injections into Horizontal Flow Stream at Low Temperature
- Bayesian Network Method for Fault Diagnosis in a Continuous Tubular Reactor
- Isotherm and Kinetics Modeling of Fluoride Removal from Industrial Effluent by Alumina
- Effect of Temperature and Catalyst Concentrations on the Thermal Properties of Polyamide Adhesives at Low Operating Pressure
- Microfluidics of Nanodrug Delivery at Different Angles of Drug Injection
- Optimization of Process Variables for Amylase Production Using Agro Residual Wastes by Taguchi Methodology
- Sorption of Acid Blue 9 on to Wheat Bran: Optimization, Equilibrium and Kinetic Studies
- Review
- Safety Improvement and Operational Enhancement via Dynamic Process Simulator: A Review
- Review of Life Cycle Assessment in Agro-Chemical Processes
