Simulation and Control of a Commercial Double Effect Evaporator: Tomato Juice

Articles in the same Issue

1. Article
2. Influence of Temperature and Pressure on the Non-Catalytic Partial Oxidation of Natural Gas
3. CFD Simulation of Hydraulics of Sieve Trays with Gas Mal-Distribution
4. Experimental Measurement and Modeling of Diffusion Anomalies in a CMS Membrane
5. Moisture Diffusivity and Energy Consumption during Microwave Drying of Plaster of Paris
6. Optimization studies on Biosorption of Copper (II) by Crab Shell Using Response Surface Methodology(RSM)
7. Simulation and Control of a Commercial Double Effect Evaporator: Tomato Juice
8. Novel PCA-Based Technique for Identification of Dominant Variables for Partial Control
9. Search for Optimal Design of Multiproduct Batch Plants under Uncertain Demand using Gaussian Process Modeling Solved by Heuristics Methods
10. Adsorption of Crude Oil Using Meshed Groundnut Husk
11. Revisiting Reaction-Diffusion Process in a Porous Catalyst: Improving the Adomian Solution
12. Combining Design of Experiments Techniques, Connectionist Models, and Optimization for the Efficient Design of New Product Formulations
13. Simulation and Analysis of Multi-scale Transport Phenomena and Catalytic Reactions in SOFC Anodes
14. Utilization of MATLAB to Simulate Kinetics of Transesterification of Palm Oil-Based Methyl Esters with Trimethylolpropane for Biodegradable Synthetic Lubricant Synthesis
15. A Fault Detection and Diagnosis Strategy for Batch/Semi-Batch Processes
16. Kinetic Study and Modeling of Aerobic Biological Oxidation of Organic Wastewater
17. Conceptual Screening of Reactive Extraction Processing Options
18. Production of p-Anisic Acid by Modified Williamson Etherification Reaction Using Design of Experiments
19. Empty Spray Sections of Vacuum Towers: Heat and Mass Transfer with a CFD approach
20. Influence of Phase Compositions, pH and Temperature on Bovine Serum Albumin Partitioning in Aqueous Biphasic System
21. Separation of Organic Chlorine Compounds through Batch Distillation Process
22. Modeling of Infrared Drying of Polymer Solutions
23. An Object-Oriented Graphics Interface Simulator for Analysis of Fischer-Tropsch Synthesis
24. CFD Simulation of Wall Effects in Flow Past a Square Cylinder in a Stationary and Moving Plane Channel
25. Axial Variation of Mass Transfer Volumetric Coefficients in Bubble Column Bioreactors
26. Thermodynamics of Supercritical Fluid Extraction of Some Dyes and Pharmaceutical Compounds Using the Weighting Matrix Approach
27. Study of Numerous Injections into Horizontal Flow Stream at Low Temperature
28. Bayesian Network Method for Fault Diagnosis in a Continuous Tubular Reactor
29. Isotherm and Kinetics Modeling of Fluoride Removal from Industrial Effluent by Alumina
30. Effect of Temperature and Catalyst Concentrations on the Thermal Properties of Polyamide Adhesives at Low Operating Pressure
31. Microfluidics of Nanodrug Delivery at Different Angles of Drug Injection
32. Optimization of Process Variables for Amylase Production Using Agro Residual Wastes by Taguchi Methodology
33. Sorption of Acid Blue 9 on to Wheat Bran: Optimization, Equilibrium and Kinetic Studies
34. Review
35. Safety Improvement and Operational Enhancement via Dynamic Process Simulator: A Review
36. Review of Life Cycle Assessment in Agro-Chemical Processes