PROCESSING AND PROPERTIES OF NOVEL REINFORCED POLYMER BLENDS MADE OF POLYMERS AND LOW-MELTING GLASS

Articles in the same Issue

1. CONTENTS
2. MECHANICAL DESIGN OF PLASTICS INJECTION MOULDS BY MEANS OF FEA
3. REALISTIC STRESS ANALYSIS BEYOND THE INITIATION OF MATRIX CRACKS
4. INVESTIGATIONS ON THE FIBRE FRACTURE BEHAVIOUR OF CFRP LAMINATES UNDER BIAXIAL LOADING
5. THIXOMOULDING INJECTION MOULDING OF SEMI-SOLID MAGNESIUM ALLOYS
6. INJECTION TRANSFER MOULDING - AN INNOVATIVE BASIS FOR THE PROCESSING OF THERMOPLASTIC MATERIALS
7. NEW PLASTIFICATION CONCEPTS FOR MICRO INJECTION MOULDING
8. DETERMINATION OF THE DEFORMATION AND THE FAILURE MECHANISMS OF THERMOPLASTICS UNDER UNIDIRECTIONAL COMPRESSIVE STRESS
9. THE INFLUENCE OF STRAIN ON THE PROPERTIES OF PLASMA POLYMERIZED PERMEATION BARRIERS
10. APPROACH OF AN AUTOMATIC EXTRUSION DIE OPTIMIZATION
11. FLAT SPIRAL DIES - RHEOLOGICAL DESIGN WITH NETWORK THEORY
12. RADIAL WALL-THICKNESS PROFILING FOR SMALL PARISON DIAMETERS IN EXTRUSION BLOW MOLDING
13. FRICTION IN THE FEED-SECTION OF SINGLE-SCREW- EXTRUDERS DEPENDENT ON PELLET SHAPE, FILLERS AND ADDITIVES
14. PROCESSING AND PROPERTIES OF NOVEL REINFORCED POLYMER BLENDS MADE OF POLYMERS AND LOW-MELTING GLASS
15. MULTI-COMPONENT INJECTION MOULDING OF LIQUID SILICONE RUBBER/THERMOPLASTIC-COMBINATIONS
16. DEVELOPMENT OF AN ALTERNATIVE PROCESS TECHNOLOGY FOR FOAM INJECTION MOULDING WITH PHYSICAL BLOWING AGENTS
17. PRODUCTION OF OPTICAL PARTS WITH ADAPTED PROCESS AND MOULD TECHNOLOGY
18. RESIN TRANSFER MOULDING FOR RAILWAY INDUSTRY - DEVELOPMENT AND PROCESSING OF A COMPOSITE FRONT END BUMPER
19. NEW TOOL CONCEPTS FOR THE PRODUCTION OF COMPLEX STRUCTURES WITH THE RESIN INFUSION PROCESS
20. PLASMA ASSISTED EXTERNAL COATING OF PLASTICS HOLLOW BODIES
21. IMPROVEMENTS OF THE SIMULATION OF SHRINKAGE AND WARPAGE WITH NEW METHODS FOR THE MATERIAL CHARACTERISATION
22. PREDICTION OF THE MORPHOLOGY OF SEMI-CRYSTALLINE THERMOPLASTICS
23. THREE-DIMENSIONAL MODELLING AND PREDICTION OF FIBER ORIENTATION IN INJECTION MOLDING
24. BATCH VARIATIONS AND THEIR EFFECTS ON THE ELASTOMER-PROCESSING ILLUSTRATED ON THE MODEL OF THE INJECTION MOULDING PROCESS
25. PROGRESS IN THE CHARACTERISATION OF THE POLYURETHANE-SPECIFIC MATERIAL BEHAVIOUR
26. GAS-ASSISTED REACTION INJECTION MOULDING (G-RIM) OF POLYURETHANES - NEW DEVELOPMENTS
27. MODELLING AND SIMULATION OF THE FOAM FORMATION PROCESS