Issue
Licensed
Unlicensed
Requires Authentication
Volume 24, Issue 1-3
Contents
-
Requires Authentication UnlicensedCONTENTSLicensedMay 1, 2004
-
Requires Authentication UnlicensedMECHANICAL DESIGN OF PLASTICS INJECTION MOULDS BY MEANS OF FEALicensedMay 1, 2004
-
Requires Authentication UnlicensedREALISTIC STRESS ANALYSIS BEYOND THE INITIATION OF MATRIX CRACKSLicensedMay 1, 2004
-
Requires Authentication UnlicensedINVESTIGATIONS ON THE FIBRE FRACTURE BEHAVIOUR OF CFRP LAMINATES UNDER BIAXIAL LOADINGLicensedMay 1, 2004
-
Requires Authentication UnlicensedTHIXOMOULDING INJECTION MOULDING OF SEMI-SOLID MAGNESIUM ALLOYSLicensedMay 1, 2004
-
Requires Authentication UnlicensedINJECTION TRANSFER MOULDING - AN INNOVATIVE BASIS FOR THE PROCESSING OF THERMOPLASTIC MATERIALSLicensedMay 1, 2004
-
Requires Authentication UnlicensedNEW PLASTIFICATION CONCEPTS FOR MICRO INJECTION MOULDINGLicensedMay 1, 2004
-
Requires Authentication UnlicensedDETERMINATION OF THE DEFORMATION AND THE FAILURE MECHANISMS OF THERMOPLASTICS UNDER UNIDIRECTIONAL COMPRESSIVE STRESSLicensedMay 1, 2004
-
Requires Authentication UnlicensedTHE INFLUENCE OF STRAIN ON THE PROPERTIES OF PLASMA POLYMERIZED PERMEATION BARRIERSLicensedMay 1, 2004
-
Requires Authentication UnlicensedAPPROACH OF AN AUTOMATIC EXTRUSION DIE OPTIMIZATIONLicensedMay 1, 2004
-
Requires Authentication UnlicensedFLAT SPIRAL DIES - RHEOLOGICAL DESIGN WITH NETWORK THEORYLicensedMay 1, 2004
-
Requires Authentication UnlicensedRADIAL WALL-THICKNESS PROFILING FOR SMALL PARISON DIAMETERS IN EXTRUSION BLOW MOLDINGLicensedMay 1, 2004
-
Requires Authentication UnlicensedFRICTION IN THE FEED-SECTION OF SINGLE-SCREW- EXTRUDERS DEPENDENT ON PELLET SHAPE, FILLERS AND ADDITIVESLicensedMay 1, 2004
-
Requires Authentication UnlicensedPROCESSING AND PROPERTIES OF NOVEL REINFORCED POLYMER BLENDS MADE OF POLYMERS AND LOW-MELTING GLASSLicensedMay 1, 2004
-
Requires Authentication UnlicensedMULTI-COMPONENT INJECTION MOULDING OF LIQUID SILICONE RUBBER/THERMOPLASTIC-COMBINATIONSLicensedMay 1, 2004
-
Requires Authentication UnlicensedDEVELOPMENT OF AN ALTERNATIVE PROCESS TECHNOLOGY FOR FOAM INJECTION MOULDING WITH PHYSICAL BLOWING AGENTSLicensedMay 1, 2004
-
Requires Authentication UnlicensedPRODUCTION OF OPTICAL PARTS WITH ADAPTED PROCESS AND MOULD TECHNOLOGYLicensedMay 1, 2004
-
Requires Authentication UnlicensedRESIN TRANSFER MOULDING FOR RAILWAY INDUSTRY - DEVELOPMENT AND PROCESSING OF A COMPOSITE FRONT END BUMPERLicensedMay 1, 2004
-
Requires Authentication UnlicensedNEW TOOL CONCEPTS FOR THE PRODUCTION OF COMPLEX STRUCTURES WITH THE RESIN INFUSION PROCESSLicensedMay 1, 2004
-
Requires Authentication UnlicensedPLASMA ASSISTED EXTERNAL COATING OF PLASTICS HOLLOW BODIESLicensedMay 1, 2004
-
Requires Authentication UnlicensedIMPROVEMENTS OF THE SIMULATION OF SHRINKAGE AND WARPAGE WITH NEW METHODS FOR THE MATERIAL CHARACTERISATIONLicensedMay 1, 2004
-
Requires Authentication UnlicensedPREDICTION OF THE MORPHOLOGY OF SEMI-CRYSTALLINE THERMOPLASTICSLicensedMay 1, 2004
-
Requires Authentication UnlicensedTHREE-DIMENSIONAL MODELLING AND PREDICTION OF FIBER ORIENTATION IN INJECTION MOLDINGLicensedMay 1, 2004
-
Requires Authentication UnlicensedBATCH VARIATIONS AND THEIR EFFECTS ON THE ELASTOMER-PROCESSING ILLUSTRATED ON THE MODEL OF THE INJECTION MOULDING PROCESSLicensedMay 1, 2004
-
Requires Authentication UnlicensedPROGRESS IN THE CHARACTERISATION OF THE POLYURETHANE-SPECIFIC MATERIAL BEHAVIOURLicensedMay 1, 2004
-
Requires Authentication UnlicensedGAS-ASSISTED REACTION INJECTION MOULDING (G-RIM) OF POLYURETHANES - NEW DEVELOPMENTSLicensedMay 1, 2004
-
Requires Authentication UnlicensedMODELLING AND SIMULATION OF THE FOAM FORMATION PROCESSLicensedMay 1, 2004
