Band 3, Heft 1

We analysed the main changes in land use over a 21 year period within the perimeter of a Protected Natural Area (PNA) and outside this perimeter. The area is characterised by its Mediterranean mid-mountain landscape and its piedmont, which extends almost as far as the city of Madrid. We employed cartography of land use and plant formation from 1980 and 2001. We identified land uses and their changes in this time period in order to determine the principal territorial dynamics (scrub encroachment, urban development, forest encroachment, new pastures and new crops). Subsequently, we performed a comparative analysis between the changes inside and those outside the protected area. The results show that there is a boundary effect between the protected area and the surrounding zone, which is more notable in the areas where urban development has intensified. This kind of research serves to establish whether or not a PNA contributes to protecting and conserving natural resources as compared to what occurs in the unprotected surrounding area, which tends to be subjected to more aggressive dynamics.

The objective of the present paper is to provide geochemical and palynological data to characterize lignites and carbonaceous shales from Panandhro, northwestern Kutch Basin, Gujarat, Western India, in terms of their hydrocarbon potential, thermal maturity, sequence stratigraphic settings and depositional palaeoenvironment. The samples, collected in Panandhro lignite mine, belong to Naredi Formation of Late Paleocene-Early Eocene age. The geochemical results are based on proximate analysis, ultimate analysis, X-ray diffraction and Rock-Eval py-rolysis analyses, whereas palynological data include palynofossil composition and thermal alteration index (TAI). The TOC, hydrogen index (HI), cracked hydrocarbon (S2), bitumen index (BI), quality index (QI), and the total genetic potential (S1+S2) values indicate that the studied lignites and carbonaceous shales have good source rock potential. The organic matter is predominantly of type II and type II/III kerogen, which has potential to generate oil as well as gas. Thermal maturity determined from thermal alteration index (TAI), Tmax and production index (PI) indicates that the organic matter is immature, and in the diagenesis stage of organic matter transformation. The deposition of the studied carbonaceous shales and lignites took place in palaeoenvironments varying from brackish mangrove to freshwater swamp. This study indicates that the proportion of ferns, palms, volatile matter content, S/C, H/C ratios, as well as the presence of siderite and quartz can be used as an indicator of accommodation trends in the coal depositional system. The Panandhro carbonaceous shales and lignites were deposited during the lowstand systems tract with many cycles of small magnitude trangressive-regressive phases. Thus, the geochemistry and ecological palynology are useful not only for the investigation of coal quality and origin, but also to infer accommodation space settings of the mire. This can be gainfully utilized in the coal industry for coal mine planning, development and exploitation, because of the predictive ability to infer changes in stratigraphy and coal quality.

Rotation of faults or pre-existing weakness planes produce two effects on the slickenlines of fault planes. First, the rotation leads to changes in the pitch of slickenlines. As a result, the aspect of the pre-existing fault may change. For example, after rotation, a normal fault may show features of an oblique fault, a strike-slip fault, or a thrust fault. Second, due to rotation, stress states on the fault planes are different from those before the rotation. As a consequence some previous planes may be reactivated. For an isolated plane, the reactivation due to rotation can produce new sets of slickenlines. With block rotation, superimposed slickenlines can be generated in the same tectonic phase. Thus, it is not appropriate to use fault-slip data from slickenlines to analyze the stress tensor in a region where there is evidence of block rotation. As an example, we present the data of slickenlines from core samples in the Tunich area of the Gulf of Mexico. The results wrongly indicate that the calculated stress tensor deviates from the far-field stress tensor.

Quartz silt is widespread in terrestrial sediments [1]. Its ubiquity has led to its neglect as a geomaterial, and studies of silt as such are relatively rare, but it presents an interesting and continuing petrological problem. Is silt a specific geological material, is it defined by a formation process, and a set of size parameters? In the world of clastic quartz sedimentology there are obvious mode sizes; there is a sand mode at around 300–500 μm and a silt mode, an order of magnitude smaller, at 30–50 μm. Are these both defined by specific geological processes?

The present paper, with reference to the Motru catchment area, contributes to the hydrochemical studies at an international level and to the completion of the characteristics regarding the chemical flow in Romania. In this regard, it emphasizes once again the dependence between the content of dissolved salts (fixed residue — mg/l) on the one hand and the lithological conditions, human activity, flow and the surface of the catchments on the other hand. The calculation and the analysis of the chemical flow for the Motru catchment area (located in the south-west of Romania) was performed on the basis of two parameters: the average flow of dissolved chemical substances (mg/s) and specific average chemical flow (t/kmp year) recorded at the monitoring stations on the Motru River and its tributaries during the period 2005–2009. The values obtained (for example: 2.63 mg/s and 47.7 t/km2 year, at the Fata Motrului station, on the Motru River, in 2009) confirm the importance of the areal factors of natural background in the analysis of chemical flow as a morpho-dynamic process and implicitly for the chemical quality of surface waters.

Forty (22 freshwater gastropod, 14 gastropod, 4 bivalves) species and 3428 specimens of molluscs were collected and identified from a 6.3 m sequence, obtained from a core profile, of lake and fluvial sediments at Kardoskút, South Hungary. According to changes in the molluscan fauna, six malacological-palaeoecological zones can be identified in this profile. The Quaternary malacological data from the Lake Fehér core profile suggests that the Late Pleniglacial and Early Holocene development of the molluscan fauna, and local palaeoclimatic and palaeoenvironmental conditions in this area, differed from other regions in Europe.

The degree of contamination in soils, sediments and dusts can be assessed based on knowledge of a variety of factors, such as industrialization, type of contaminants, deposition conditions, contamination-control techniques, along with the characteristics of the recipient environmental compartments, which include pathways for contamination transport, depth of infiltration, and degree of groundwater contamination. The impact of contaminants also depends on the quantity, mobility and speciation of contaminants/wastes as well as on the sensitivity of the recipient compartments. With sufficient knowledge of these factors, a number of conclusions can be drawn concerning the status of contamination in industrialized areas. This literature review aims to scrutinize some of the methods used to analyse the occurrence, speciation, mobility, bioavailability and likely the toxic effects of contaminants in the environment.

Oosparite grainstones of the Pleistocene Ironshore Formation, Little Cayman, British West Indies, contain the trace fossils Conichnus conicus, Ophiomorpha nodosa, and Planolites beverleyensis. The dominance of vertically-oriented trace fossils, complexity of cross-stratifications, coarseness of the sediment channel fill, and presence of several rudstone layers suggest deposition close to the seaward portion of lagoonal channels where higher energy conditions prevailed.

In this paper, the state of stress in the northern Tabas block in east-central Iran is analyzed based on the systematic inversion of aftershock focal mechanisms from the 1978.09.16 Tabas earthquake, to characterise the stress regime that controls most earthquakes in this area. Here, stress inversions of double-couple focal mechanisms of earthquakes recorded during the 30 days following the main shock have been carried out. The calculated average stress regime indicates dominant major 226° to 237° trending compression for the Tabas region. The dominating regime in east-central Iran is thrusting with a minimum stress axis, σ 3, close to vertical. The reconstruction of the main seismotectonic stress in east-central Iran with a NE-SW compression is consistent with independent information of the active plate convergence related to Arabia-Eurasia convergence. Most earthquakes in the mentioned area occur near or around concealed Quaternary thrust faults with their activity being controlled by the NE-SW compression. Where ϕ, the ratio of principal stress differences, is 0.5, a small difference between σ 2; σ 3 and σ 1 and small amounts of deviatoric stress is indicated. Therefore, for small deviatoric horizontal σ 1 it is not possible to increase and reactivate small sections of basement thrust faults and create secondary basement aftershocks. Reconstructed stress regimes in this study for sedimentary cover (237) and basement (226) of Tabas are similar. Therefore, it seems that the basement and cover were coupled together, possibly along the 2–4 km of upper Precambrian low-grade metamorphic rocks. Then these segments of the fold-and-thrust belt were involved in similar seismic activity under a similar stress regime.

This paper gives a review on the topic of the mean radiant temperature Tmrt, the most important parameter influencing outdoor thermal comfort during sunny conditions. Tmrt summarizes all short wave and long wave radiation fluxes reaching the human body, which can be very complex (variable in spatial and also in temporal manner) in urban settings. Thermal comfort researchers and urban planners need easy and sound methodological approaches to assess Tmrt. After the basics of the Tmrt calculation some of the methods suitable for obtaining Tmrt also in urban environments will be presented.. Two of the discussed methods are based on instruments which measure the radiation fluxes integral (globe thermometer, pyranometer-pyrgeometer combination), and three of the methods are based on modelling the radiation environment with PC software (RayMan, ENVI-met and SOLWEIG).