Band 2, Heft 1

This mini review deals with a recently developing water purification technology, i.e. capacitive deionization. It presents the current progress achieved with polymer coated electrodes in capacitive deionization for desalination. The introduction covers capacitive deionization, application of polymer or polymer composite in capacitive deionization electrode, comparative study and discussion on fabrication of electrode. This paper aims at indicating novel research prospects in capacitive deionization technology for desalination.

Ionic mobility and solvent vapor pressure were studied on gels containing sodium perchlorate, polymethylmethacrylate and sulfolane as a solvent. The excess of solvent increases markedly the mobility of ions and is indicated by solvent evaporation at elevated temperature. The solvent is bonded similarly as in the liquid solution of sodium salt. The heat of solvent evaporation from gels is near to that of pure solvents.

A new active composite coating for graphite gas diffusion electrode for hybrid sulfur cycle was proposed. The kinetics of oxidation of SO2 were studied on porous graphite anodes with different catalytic coatings. It was shown that the most efficient composite coating is based on activated carbon and platinum supported on graphite gas diffusion substrate. The voltage drop in the laboratory electrochemical cell was 1.3 V at a current density of 1000 A·m−2. This corresponds to a specific consumption of 3.1 kWh electric energy per 1 m3 of hydrogen.

A mini review of a recently developing water purification technology capacitive deionization (CDI) applied for removal of pollutant ions is provided. The current progress of CDI for removal of different pollutant ions such as arsenic, fluoride, boron, phosphate, lithium, copper, cadmium, ferric, and nitrate ions is presented. This paper aims at motivating new research opportunities in capacitive deionization technology for removal of pollutant ions from polluted water.