Startseite Microstructural characterization and microhardness of rapidly solidified Al –Ce alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Microstructural characterization and microhardness of rapidly solidified Al –Ce alloys

  • Zhonghua Zhang , Xiufang Bian und Yan Wang
Veröffentlicht/Copyright: 3. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 93 Heft 6

Abstract

The microstructures of rapidly solidified Al-8 Ce and Al-20 Ce (wt.%) alloys have been characterized. The phases present in as-spun alloys are identified to be α-Al and α-Al11Ce3, identical to those in the ingot-like alloys. The microstructure of as-spun Al-8 Ce alloy is fully composed of irregular and elongated α-Al cells with intercellular α-Al11Ce3. In as-spun Al-20 Ce alloy, however, some zones comprise columnar and irregular α-Al dendrites with interdendritic α-Al11Ce3 and other zones comprise irregular α-Al microdendrites with interdendritic α-Al11Ce3. Age hardening effect is not observed in the present alloys. The microhardness changes little with time when annealing below 300 °C but sharply decreases when annealing at 400 or 500 °C, indicating that the thermal stability of as-spun Al-8 Ce and Al-20 Ce alloys rapidly deteriorates above 300 °C.

Keywords: Al –Ce alloys; Melt spinning; Transmission electron microscopy; Hardness testing

  1. The authors gratefully acknowledge the support of the National Natural Science Foundation of China (No. 50071028) and the Shandong Natural Science Foundation of China (No. Z2001F02).

References

1 Savage, S.J.; Froes, F.H., in: B.H. Kear, B.C. Giessen (eds.), Rapidly Solidified Metastable Materials, Elsevier Science, New York (1984) 329.Suche in Google Scholar

2 Savage, S.J.; Froes, F.H.; Eliezer, D., in: P.W. Lee, R.S. Carbonara (eds.), Rapidly Solidified Materials, ASM International Metals Park, OH (1985) 351.Suche in Google Scholar

3 Savage, S.J.; Mahajan, Y.R., in: S. Steeb, H.Warlimont (eds.), Rapidly Quenched Metals, Elsevier North Holland, Amsterdam (1985) 915.10.1016/B978-0-444-86939-5.50218-9Suche in Google Scholar

4 Savage, S.J.; Eliezer, D.; Froes, F.H.: Metall. Trans. A 18 (1987) 1533.10.1007/BF02646666Suche in Google Scholar

5 Eliezer, D.; Savage, S.J.; Mahajan, Y.R.; Froes, F.H., in: B.C. Giessen, D.E. Polk and A.I. Taub (eds.), Rapidly Solidified Alloys and their Mechanical and Magnetic Properties, MRS, Pittsburgh, PA (1986) 293.Suche in Google Scholar

6 Fass, M.; Itzhak, D.; Eliezer, D.; Froes, F.H.: J. Mater. Sci. Lett. 6 (1987) 1227.10.1007/BF01729193Suche in Google Scholar

7 Fass, M.; Itzhak, D.; Eliezer, D.; Froes, F.H.: J. Mater. Sci. Lett. 7 (1988) 76.10.1007/BF01729922Suche in Google Scholar

8 Ruder, A.; Eliezer, D.: Israel J. Technol. 24 (1988) 149.Suche in Google Scholar

9 Ruder, A.; Eliezer, D.: J. Mater. Sci. 24 (1989)1474.10.1007/BF02397088Suche in Google Scholar

10 Ruder, A.; Eliezer, D.: J. Mater. Sci. Lett. 8 (1989) 725.10.1007/BF01730456Suche in Google Scholar

11 Ruder, A.; Eliezer, D.: J. Mater. Sci, 25 (1990) 3541.10.1007/BF00575385Suche in Google Scholar

12 Dill, B.; Li, Y.; Al-Khafaji, M.; Rainforth, W.M.; Buckley, R.A.; Jones, H.: J. Mater. Sci. 29 (1994) 3913.10.1007/BF00355949Suche in Google Scholar

13 Al-Khafaji, M.A.; Li, Y.; Rainforth, W.M.; Jones, H.: Phil. Mag. B 70 (1994) 1129.10.1080/01418639408240278Suche in Google Scholar

14 Waterloo, G.; Jones, H.: J. Mater. Sci. 31 (1996) 2301.10.1007/BF01152938Suche in Google Scholar

15 Inoue, A.; Ohtera, K.; Masumoto, T.: Jpn. J. Appl. Phys. 27 (1988) L736.10.1143/JJAP.27.L736Suche in Google Scholar

16 Inoue, A.; Ohtera, K.; Zhang, T.; Masumoto, T.: Jpn. J. Appl. Phys. 27 (1988) L1583.10.1143/JJAP.27.L1583Suche in Google Scholar

17 Inoue, A.; Zhang, T.; Kita, K.; Masumoto, T.: Mater. Trans. JIM 30 (1989) 870.10.2320/matertrans1989.30.870Suche in Google Scholar

18 Inoue, A.; Ohtera, K.; Masumoto, T.: Sci. Rep. RITU A 35 (1990) 115.Suche in Google Scholar

19 Inoue, A.; Watanabe, M.; Kimura, H.; Masumoto, T.: Sci. Rep. RITU A 36 (1991) 59.Suche in Google Scholar

20 Hansen, M.; Anderko, K.: Constitution of Binary Alloys, McGraw-Hill, New York (1985) 78.Suche in Google Scholar

21 Hawksworth, A.; Rainforth,W.M.; Jones, H.: Mater. Sci. Technol. 15 (1999) 616.10.1179/026708399101506346Suche in Google Scholar

22 Hawksworth, A.; Rainforth, W.M.; Jones, H.: J. Cryst. Growth 197 (1999) 286.10.1016/S0022-0248(98)00955-5Suche in Google Scholar

23 Juarez-Hernandez, A.; Jones, H.: J. Cryst. Growth 208 (2000) 442.10.1016/S0022-0248(99)00400-5Suche in Google Scholar

24 Jones, H.: Mater. Sci. Eng. 5 (1969) 1.10.1016/0025-5416(69)90077-9Suche in Google Scholar

25 Gschneidner, K.A. Jr.; Calderwood, F.W.: Bull. Alloy Phase Diagr. 9 (1988) 669.10.1007/BF02883162Suche in Google Scholar

26 Nowotny, H.: Z. Kristallogr. 34 (1942) 22.Suche in Google Scholar

27 Buschow, K.H.J.; van Vucht, J.H.N.: Z. Metallkd. 57 (1966) 162.Suche in Google Scholar

28 Elliott, R.P.: Constitution of Binary Alloys: First Supplement, McGraw-Hill, New York and London (1965).Suche in Google Scholar

29 Kononenko, V.I.; Golubev, S.V.: Russian Met. 2 (1990) 193.Suche in Google Scholar

30 Street, K.N.; St John, C.F.; Piatti, G.:J. Inst. Metals 95 (1967) 326.Suche in Google Scholar

31 Hawksworth, A.; Rainforth, W.M.; Jones, H.: Mater. Sci. Eng. A 262 (1999) 159.10.1016/S0921-5093(98)01003-XSuche in Google Scholar

32 Fass, M.; Eliezer, D.: J. Mater. Sci. Lett. 8 (1989) 178.10.1007/BF00730718Suche in Google Scholar

33 Boettinger, W.J.; Shechtman, D.; Schaefer, R.J.; Biancaniello, F.S.: Metall. Trans. A 15 (1984) 55.10.1007/BF02644387Suche in Google Scholar

34 Jones, H.: Mater. Lett. 6 (1988) 181.10.1016/0167-577X(88)90097-3Suche in Google Scholar

35 Neumann, W.; Leonhardt, M.; Loser, W.; Sellger, R.; Jurisch, M.: J. Mater. Sci. 20 (1985) 3141.10.1007/BF00545179Suche in Google Scholar

36 Baker, J.C; Cahn, J.W.: Acta Metall. 17 (1971) 575.10.1016/0001-6160(69)90116-3Suche in Google Scholar
Published Online: 2022-01-03

© 2002 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Mechanical properties of Cu/In – 48 Sn/Cu diffusion-soldered joints
  4. Effect of ultrasonic (cavitation) treatment of the melt on the microstructure evolution during solidification of aluminum alloy ingots
  5. Computer simulation of the long-range diffusional transformation based on the postulated principle of maximum dissipation rate of Gibbs energy
  6. Kinetics of growth of intermetallics in the Cu–Sn system
  7. Atomic composition of the metastable β″ phase precipitate in an Al –Mg–Si alloy
  8. Interfacial tension of metastable immiscible alloys: a novel measurement concept
  9. On the kinetics of the initial oxidation of iron and iron nitride
  10. Synthesis and characterisation of MgAlON
  11. Kinetic studies of oxidation of MgAlON and a comparison of the oxidation behaviour of AlON, MgAlON, O’SiAlON–ZrO2, and BN–ZCM ceramics
  12. Study on warm rolling of AISI 1015 carbon steel
  13. Experimental study on elastic modulus and damping capacity of woodceramics
  14. Texture development during cold rolling of unidirectionally solidified Al–Al3Ni alloy
  15. Wear behavior of A356/M7C3 and A356/SiC particulate metal matrix composites
  16. Microstructural characterization and microhardness of rapidly solidified Al –Ce alloys
  17. Effect of quenching rate on the microstructure of rapidly solidified Al –Sr alloys
  18. The protective mechanism of the native rust layer on Cr-containing steels exposed to marine atmosphere
  19. Notifications/Mitteilungen
  20. Personen
  21. DGM conferences
https://doi.org/10.3139/ijmr-2002-0097
Schlagwörter für diesen Artikel
Al –Ce alloys; Melt spinning; Transmission electron microscopy; Hardness testing

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Mechanical properties of Cu/In – 48 Sn/Cu diffusion-soldered joints
  4. Effect of ultrasonic (cavitation) treatment of the melt on the microstructure evolution during solidification of aluminum alloy ingots
  5. Computer simulation of the long-range diffusional transformation based on the postulated principle of maximum dissipation rate of Gibbs energy
  6. Kinetics of growth of intermetallics in the Cu–Sn system
  7. Atomic composition of the metastable β″ phase precipitate in an Al –Mg–Si alloy
  8. Interfacial tension of metastable immiscible alloys: a novel measurement concept
  9. On the kinetics of the initial oxidation of iron and iron nitride
  10. Synthesis and characterisation of MgAlON
  11. Kinetic studies of oxidation of MgAlON and a comparison of the oxidation behaviour of AlON, MgAlON, O’SiAlON–ZrO2, and BN–ZCM ceramics
  12. Study on warm rolling of AISI 1015 carbon steel
  13. Experimental study on elastic modulus and damping capacity of woodceramics
  14. Texture development during cold rolling of unidirectionally solidified Al–Al3Ni alloy
  15. Wear behavior of A356/M7C3 and A356/SiC particulate metal matrix composites
  16. Microstructural characterization and microhardness of rapidly solidified Al –Ce alloys
  17. Effect of quenching rate on the microstructure of rapidly solidified Al –Sr alloys
  18. The protective mechanism of the native rust layer on Cr-containing steels exposed to marine atmosphere
  19. Notifications/Mitteilungen
  20. Personen
  21. DGM conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0097/pdf
Button zum nach oben scrollen