Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
-
H. Ahlatci
Abstract
The effect of the reinforcing particle size on the mechanical properties of 60 vol.% SiC reinforced aluminium matrix composites produced by the pressure infiltration technique was examined by compression, impact and wear tests. The compression strength and the impact resistance decreased with increasing reinforcing particle size. The composites exhibited different abrasion behaviour depending on the size of abrasive Al2O3 grains. On fine abrasive Al2O3 grains (85 μm), the abrasion resistance increased with increasing reinforcing SiC particle size. The contrary result was obtained on coarse abrasive Al2O3 grains (250 μm). The wear tests conducted on M2 quality tool steel revealed that reinforcing of aluminium with coarse SiC particles has a very beneficial effect on the wear resistance with respect to fine reinforcing SiC particles.
References
1 Eliassen, J.; Sandström, R.: Key Eng. Mater. 104–106 (1995) 3.10.4028/www.scientific.net/KEM.104-107.3Suche in Google Scholar
2 Wang, A.G.; Hutchings, I.M.: Mater. Sci. Technol. 5 (1989) 71.10.1179/mst.1989.5.1.71Suche in Google Scholar
3 Alpas, A.T.; Zhang, J.: Scripta Metall. Mater. 26 (1992) 505.10.1016/0956-716X(92)90638-USuche in Google Scholar
4 Alpas, A.T.; Zhang, J.: Wear 155 (1992) 83.10.1016/0043-1648(92)90111-KSuche in Google Scholar
5 Pramila Bai, B.N.; Ramasesh, B.S.; Surappa, M.K.: Wear 157 (1992) 295.10.1016/0043-1648(92)90068-JSuche in Google Scholar
6 Modi, O.P.; Prasad, B.K.; Yegnewaran, A.H.; Vaidya, M.L.: Mater. Sci. Eng. A 151 (1992) 235.10.1016/0921-5093(92)90212-JSuche in Google Scholar
7 Alpas, A.T.; Zhang, J.: Metall. Trans. A 25 (1994) 969.10.1007/BF02652272Suche in Google Scholar
8 Hutchings, I.M.: Mater. Sci. Technol. 10 (1994) 513.10.1179/mst.1994.10.6.513Suche in Google Scholar
9 Axen, N.; Jacobson, S.: Wear 178 (1994) 1.10.1016/0043-1648(94)90124-4Suche in Google Scholar
10 Axen, N.; Alahelisten, A.; Jacobson, S.: Wear 173 (1994) 95.10.1016/0043-1648(94)90261-5Suche in Google Scholar
11 Gurcan, A.B.; Baker, T.N.: Wear 188 (1995) 185.10.1016/0043-1648(95)06639-XSuche in Google Scholar
12 Song, W.Q.; Krauklis, P.; Mouritz, A.P.; Bandyopadhyay, S.:Wear 185 (1995) 125.10.1016/0043-1648(95)06599-7Suche in Google Scholar
13 Liang, Y.N.; Ma, Z.Y.; Li, S.Z.; Li, S.; Bi, J.: J. Mater. Sci. Lett. 14 (1995) 114.10.1007/BF00456563Suche in Google Scholar
14 Zhang, Z.; Zhang, L.; Mai, Y.W.: J. Mater. Sci. 30 (1995) 5999.10.1007/BF01151519Suche in Google Scholar
15 Sheu, C.-Y.; Lin, S.-J.: Scripta Metall. Mater. 35 (1996) 1271.10.1016/1359-6462(96)00291-6Suche in Google Scholar
16 Bai, M.; Xue, Q.; Guo, H.: Wear 194 (1996) 126.10.1016/0043-1648(95)06820-1Suche in Google Scholar
17 Ma, Z.Y.; Liang, Y.N.; Zhang, Y.Z.; Lu, Y.X.; Bi, J.: Mater. Sci. Technol. 12 (1996) 751.10.1179/mst.1996.12.9.751Suche in Google Scholar
18 Ravikiran, A.; Surappa, M.K.: Wear 206 (1997) 33.10.1016/S0043-1648(96)07341-3Suche in Google Scholar
19 Wilson, S.; Alpas, A.T.: Wear 212 (1997) 41.10.1016/S0043-1648(97)00142-7Suche in Google Scholar
20 Al Rubaie, K.S.; Yashimura, H.N.; Biasali de Mello, J.D.: Wear 233–235 (1999) 444.10.1016/S0043-1648(99)00185-4Suche in Google Scholar
21 Long, S.; Beffort, O.; Cayron, C.; Bonjour, C.: Mater. Sci. Eng. A 269 (1999) 175.10.1016/S0921-5093(99)00163-XSuche in Google Scholar
22 Li, X.Y.; Tandon, K.N.: Wear 245 (2000) 148.10.1016/S0043-1648(00)00475-0Suche in Google Scholar
23 Candan, E.; Ahlatci, H.; Çimenoğlu, H.: Wear 247 (2001) 133.10.1016/S0043-1648(00)00499-3Suche in Google Scholar
24 Yang, Y.; Cady, C.; Hu, M.S.; Zok, F.; Mehrabian, R.; Evans, A.G.: Acta Metall. Mater. 38 (1990) 2613.10.1016/0956-7151(90)90273-JSuche in Google Scholar
25 Hu, M.S.: Scripta Metall. Mater. 25 (1991) 695.10.1016/0956-716X(91)90117-JSuche in Google Scholar
26 Arsenault, R.J.; Wang, L.; Feng, C.R.: Acta Metall. Mater. 39 (1991) 47.10.1016/0956-7151(91)90327-WSuche in Google Scholar
27 Hunt, Jr., W.H.; Brockenbrough, J.R.; Magnusen, P.E.: Scripta Metall. Mater. 25 (1991) 15.10.1016/0956-716X(91)90346-3Suche in Google Scholar
28 Weng, B.J.; Chang, S.T.; Shiau, J.S.: Scripta Metall. Mater. 27 (1992) 1127.10.1016/0956-716X(92)90586-4Suche in Google Scholar
29 Jiang, J.; Dodd, B.: Composites 26 (1995) 62.10.1016/0010-4361(94)P3631-ASuche in Google Scholar
30 Davidson, A.M.; Regener, D.: Composites Sci. Technol. 60 (2000) 865.10.1016/S0266-3538(99)00151-7Suche in Google Scholar
31 Flom, Y.; Arsenault, R.J.: Acta Metall. Mater. 37 (1989) 2413.10.1016/0001-6160(89)90039-4Suche in Google Scholar
32 Brechet, Y.; Embury, J.D.; Tao, S.; Luo, L.; Acta Metall. Mater. 39 (1991) 17781.Suche in Google Scholar
33 Hunt, Jr., W.H.; Osman, T.M.; Lewandowski, J.J.: JOM 45 (1993) 30.10.1007/BF03223363Suche in Google Scholar
34 Arikan, M.M.; Çimenoğlu, H.; Kayali, E.S.:Wear 247 (2001) 231.10.1016/S0043-1648(00)00523-8Suche in Google Scholar
35 Sun, Y.; Baydoğan, M.; Çimenoğlu, H.. Mater. Lett. 38 (1999) 221.10.1016/S0167-577X(98)00162-1Suche in Google Scholar
36 Candan, E.; Atkinson, H.V.; Jones, H.: Scripta Metall. Mater. 38 2(1998) 999.10.1016/S1359-6462(97)00553-8Suche in Google Scholar
© 2002 Carl Hanser Verlag, München
Artikel in diesem Heft
- Frontmatter
- Articles/Aufsätze
- 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
- 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
- Thermodynamic assessment of the Cu–Ti system taking into account the new stable phase CuTi3
- Thermodynamic assessment of the Pd–Sc system
- Heat content of liquid Fe –Cu–Si alloys formed in the melting treatment process of domestic waste incineration residue
- A model of viscosity for liquid metals
- Umwandlungswärme einer NiTi-Gedächtnislegierung unter Last
- Study of magnetic properties of Ni –Fe –P and Ni –Fe –P–B chemical films
- Geometrical modelling of a crystal grain in a weld of ferritic stainless steel
- Welding of heat-resistant 20% Cr – 5% Al steels
- Finite element analysis of γ′ directional coarsening in Ni-based superalloys
- Quantitative analysis of aluminium alloys using SIMS
- Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
- Notifications/Mitteilungen
- Personal/Personelles
Artikel in diesem Heft
- Frontmatter
- Articles/Aufsätze
- 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
- 59Fe Grain boundary diffusion in nanostructured γ-Fe–Ni
- Thermodynamic assessment of the Cu–Ti system taking into account the new stable phase CuTi3
- Thermodynamic assessment of the Pd–Sc system
- Heat content of liquid Fe –Cu–Si alloys formed in the melting treatment process of domestic waste incineration residue
- A model of viscosity for liquid metals
- Umwandlungswärme einer NiTi-Gedächtnislegierung unter Last
- Study of magnetic properties of Ni –Fe –P and Ni –Fe –P–B chemical films
- Geometrical modelling of a crystal grain in a weld of ferritic stainless steel
- Welding of heat-resistant 20% Cr – 5% Al steels
- Finite element analysis of γ′ directional coarsening in Ni-based superalloys
- Quantitative analysis of aluminium alloys using SIMS
- Effect of the particle size on the mechanical properties of 60 vol.% SiCp reinforced Al matrix composites
- Notifications/Mitteilungen
- Personal/Personelles
