RheoDSC Analysis of Hardening of Semi-Crystalline Polymers during Quiescent Isothermal Crystallization

References

Acierno, S., Grizzuti, N., “Measurements of the Rheological Behavior of a Crystallizing Polymer by an ‘Inversed Quenching’ Technique”. J. Rheol., 47, 563–576(2003), DOI: 10.1122/1.1545080Suche in Google Scholar

Acierno, S., et al., “Structure Development during Crystallization of Polycaprolactone”, Rheol. Acta, 45, 387–392(2006), DOI: 10.1007/s00397-005-0054-2Suche in Google Scholar

Acierno, S., et al., “Rheological Techniques for the Determination of the Crystallization Kinetics of a Polypropylene-EPR Copolymer”, J. Therm. Anal. Calorim., 98, 639–644(2009), DOI: 10.1007/s10973-009-0508-3Suche in Google Scholar

Aral, B. K., Kalyon, D. M., “Viscoelastic Material Functions of Noncolloidal Suspensions with Spherical Particles”. J. Rheol., 41, 599–620(1997), DOI: 10.1122/1.550841Suche in Google Scholar

Baert, J., Van Puyvelde, P., “Effect of Molecular and Processing Parameters on the Flow-induced Crystallization of Poly-1-Butene. Part 1: Kinetics and Morphology”, Polymer, 47, 5871–5879(2006), DOI: 10.1016/j.polymer.2006.06.009Suche in Google Scholar

Baert, J., Van Puyvelde, P., “Flow-induced Crystallization of PB-1: From the Low Shear Rate Region up to Processing Rates”. Macromolecules, 39, 9215–9222(2006), DOI: 10.1021/ma062068qSuche in Google Scholar

Barker, D. A., Wilson, D. I., “Temperature Profiles in a Controlled-stress Parallel Plate Rheometer”, Rheol. Acta, 46, 23–31(2006), DOI: 10.1007/s00397-005-0050-6Suche in Google Scholar

Coppola, S., et al., “Effects of the Degree of Undercooling on Flow Enhanced Crystallization in Polymer Melts”, Polymer, 45, 3249–3256(2004), DOI: 10.1016/j.polymer.2004.03.049Suche in Google Scholar

Coppola, S., et al., “Viscoelastic Behavior of Semicrystalline Thermoplastic Polymers during the Early Stages of Crystallization”. Macromolecules, 39, 1507–1514(2006), DOI: 10.1021/ma0518510Suche in Google Scholar

Di Lorenzo, M. L., Silvestre, C., “Non-isothermal Crystallization of Polymers”, Prog. Polym. Sci., 24, 917–950(1999), DOI: 10.1016/S0079-6700(99)00019-2Suche in Google Scholar

Elmoumni, A., Winter, H. H., “Large Strain Requirements for Shear-induced Crystallization of Isotactic Polypropylene”, Rheol. Acta, 45, 793–801(2006), DOI: 10.1007/s00397-005-0082-ySuche in Google Scholar

Filipe, S., et al., “Shear and Extensional Flows as Drivers for the Crystallization of Isotactic Polypropylene”, J. Therm. Anal. Calorim., 98, 667–674(2009), DOI: 10.1007/s10973-009-0517-2Suche in Google Scholar

Guo, J. X., Narh, K. A., “Simplified Model of Stress-induced Crystallization Kinetics of Polymers”, Adv. Polym. Techn., 21, 214–222(2002), DOI: 10.1002/adv.10022Suche in Google Scholar

Hadinata, C., et al., “Shear-induced Crystallization of PB-1 up to Processing Relevant Shear Rates”, Rheol. Acta, 45, 539–546(2006), DOI: 10.1007/s00397-005-0057-zSuche in Google Scholar

Housmans, J. W., et al., “Flow-induced Crystallization of Propylene/Ethylene Random Copolymers”, J. Therm. Anal. Calorim., 98, 693–705(2009), DOI: 10.1007/s10973-009-0532-3Suche in Google Scholar

Janssens, V., et al., “RheoDSC: Design and Validation of a New Hybrid measurement Technique”, J. Therm. Anal. Calorim., 98, 675–681(2009), DOI: 10.1007/s10973-009-0518-1Suche in Google Scholar

Kiewiet, S., et al., “RheoDSC: A Hyphenated Technique for the Simultaneous Measurement of Calorimetric and Rheological Evolutions”, Rev. Sci. Instr., 79, 023905(2008), DOI: 10.1063/1.2838585, PMid: 18315314Suche in Google Scholar PubMed

Lamberti, G., et al., “Crystallinity and Linear Rheological Properties of Polymers”, Int. Polym. Process., 22, 303–310(2007)Suche in Google Scholar

Martins, J. A., et al., “Evaluation of the Sample Temperature Increase during the Quiescent and Shear-induced Isothermal Crystallization of Polyethylene”, Polymer, 44, 8071–8079(2003), DOI: 10.1016/j.polymer.2003.09.064Suche in Google Scholar

Pantani, R., et al., “Modeling of Morphology Evolution in the Injection Molding Process of Thermoplastic Polymers”, Prog. Polym. Sci., 30, 1185–1222(2005), DOI: 10.1016/j.progpolymsci.2005.09.001Suche in Google Scholar

Pogodina, N. V., Winter, H. H., “Polypropylene Crystallization as a Physical Gelation Process”, Macromol., 31, 8164–8172(1998), DOI: 10.1021/ma980134lSuche in Google Scholar

Sajkiewicz, P., “Transient and Athermal Effects in the Crystallization of Polymers. I. Isothermal Crystallization”, J. Polym. Sci., Part B: Polym. Phys., 40, 1835–1849(2002), DOI: 10.1002/polb.10227Suche in Google Scholar

Schick, C., “Differential Scanning Calorimetry of Semicrystalline Polymers”, Anal. Bioanal. Chem., 395, 1589–1611(2009), DOI: 10.1007/s00216-009-3169-y, PMid: 19834693Suche in Google Scholar PubMed

Steenbakkers, R., Peters, G. W. M., “Suspension Based Rheological Modeling of Crystallizing Polymer Melts”, Rheol. Acta, 47, 643–665(2008), DOI: 10.1007/s00397-008-0273-4Suche in Google Scholar

Titomanlio, G., et al., “On the Simulation of Thermoplastic Injection Moulding Process. 2 Relevance of Interaction between Flow and Crystallization”, Int. Polym. Proc., 12, 45–53(1997)Suche in Google Scholar

Wang, K., et al., “Rheologically determined Negative Influence of Increasing Nucleating Agent Content on the Crystallization of Isotactic Polypropylene”, Polymer, 50, 696–706(2009), DOI: 10.1016/j.polymer.2008.11.019Suche in Google Scholar

Zhang, W., Martins, J. A., “The Temperature Calibration of a Parallel Plate Rheometer and Evaluation of the Thermal Lags during Polymer Solidification”, Thermochim. Acta, 413, 101–110(2004), DOI: 10.1016/j.tca.2003.10.017Suche in Google Scholar