Startseite Effect of drawing with shear on structure and properties of low-carbon steel
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of drawing with shear on structure and properties of low-carbon steel

  • Elena Pashinskaya , Anatoly Zavdoveev , Sergey Mironov , Victor Varyukhin und Anna Maksakova
Veröffentlicht/Copyright: 26. Februar 2016
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 107 Heft 3

Abstract

The feasibility of drawing with shear of low-carbon steel for wire production was studied. The new approach was shown to be more effective in producing of homogeneous microstructure with refined grain size, reduced porosity and increased mechanical strength. These effects were attributed to a specific “twist” character of material flow.

Keywords: Low carbon steel; Severe plastic deformation; Wiredrawing; Microstructure
*Correspondence address, Dr. Sergey Mironov, Department of Materials Processing, Graduate School of Engineering, Tohoku University, 6-6-02 Aramaki-aza-Aoba, Aoba-ku, Sendai 980-8579, Japan. Tel.: +81-22-795-7353, Fax: +81-22-795-7352, E-mail:

References

[1] R.Z.Valiev, I.V.Alexandrov: Nanostructured materials produced by severe plastic deformation, Logos, Moscow (2000).Suche in Google Scholar

[2] Y.Estrin, A.Vinogradov: Acta Mater.61 (2013) 782. 10.1016/j.actamat.2012.10.038Suche in Google Scholar

[3] E.Pashinska, M.Myshlyaev, S.Mironov, V.Varyukhin: Phys. Met. Metal.105 (2008) 86. 10.1134/S0031918X08010080Suche in Google Scholar

[4] E.Pashinska, V.Varykhin, S.Dobatkin, A.Zavdoveev: Emerging Mater. Res.2 (2013) 139. 10.1680/emr.14.00016Suche in Google Scholar

[5] S.K.Hwang, H.M.Baek, Y.-T.Im, I.-H.Son, C.M.Bae, H.W.Lee: J. Mater. Proc. Technol.214 (2014) 1398. 10.1016/j.jmatprotec.2014.02.001Suche in Google Scholar

[6] S.K.Hwang, H.M.Baek, L.-H.Son, Y.-T.Im, C.M.Bae: Mater. Sci. Eng. A579 (2013) 118. 10.1016/j.msea.2013.05.005Suche in Google Scholar

[7] K.Muszka, L.Madej, J.Majta: Mater. Sci. Eng. A574 (2013) 68. 10.1016/j.msea.2013.03.024Suche in Google Scholar

[8] E.Astafurova, G.Zaharova, E.Najdenkin, G.Raab, P.Odesskij, S.Dobatkin: Pisma o Materialakh1 (2011) 198.Suche in Google Scholar

[9] E.Astafurova, G.Zaharova, E.Najdenkin, S.Dobatkin, G.Raab: Phys. Mech. Mater.110 (2010) 260. 10.1134/S0031918X10090097Suche in Google Scholar

[10] E.Pashinska, V.Varyukhin, M.Myshlaev, A.Zavdoveev: Adv. Eng. Mater.16 (2014) 26. 10.1002/adem.201300197.Suche in Google Scholar

[11] M.A.Carruth, J.M.Allwood: J. Mater. Proc. Technol.212 (2012) 1640. 10.1016/j.jmatprotec.2012.03.006.Suche in Google Scholar

[12] E.Pashinska, A.Maksakova, A.Zavdoveev, V.Tkachenko, in: Influence of drawing with shear technology on the structure and properties of low-carbon wire, Proc. “Mechanical technologies and structural materials”, Split, Croatia (2014) 125–130.Suche in Google Scholar

[13] Y.Beygelzimer, D.Orlov, A.Korshunov, S.Synkov, V.Varyukhin, I.Vedernikova, A.Reshetov, A.Synkov, L.Polyakov, I.Korotchenkova: Solid State Phenom.114 (2006) 69. 10.4028/www.scientific.net/SSP.114.69Suche in Google Scholar

[14] D.Orlov, Y.Todaka, M.Umemoto, Y.Beygelzimer, N.Tsuji: Mater. Trans.53 (2012) 17. 10.2320/matertrans.MD201113Suche in Google Scholar

Received: 2015-08-03
Accepted: 2015-10-28
Published Online: 2016-02-26
Published in Print: 2016-03-11

© 2016, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Fe–N and Fe–N–C phase equilibria above 853 K studied by nitriding/nitrocarburising and secondary annealing
  5. Microstructural development and crystallographic properties of decomposing Fe–N–C compound layers
  6. Experimental study on phase relationships in the Co-rich portion of the Co–Ti–Zr system
  7. On the role of alloying elements in the formation of serrated grain boundaries in Ni-based alloys
  8. Effect of drawing with shear on structure and properties of low-carbon steel
  9. Experimental study of FLD0 for aluminum alloy using digital image correlation with modified ISO method
  10. Global modeling for elevated temperature flow behavior of 6013 aluminum alloy during two-pass deformation
  11. The relationship between the pore size distribution and the thermo-mechanical properties of high alumina refractory castables
  12. Optimization of the phase composition of high-calcium-content slag for stabilization and the obtaining of hydraulic properties
  13. Short Communications
  14. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
  15. Original Contributions
  16. Photoluminescence properties of Tb3+-doped stalk-like Al2O3
  17. Effect of deposition parameters on the crystal orientation and growth of Ag nanowires
  18. DGM News
  19. DGM News
https://doi.org/10.3139/146.111338
Schlagwörter für diesen Artikel
Low carbon steel; Severe plastic deformation; Wiredrawing; Microstructure

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Fe–N and Fe–N–C phase equilibria above 853 K studied by nitriding/nitrocarburising and secondary annealing
  5. Microstructural development and crystallographic properties of decomposing Fe–N–C compound layers
  6. Experimental study on phase relationships in the Co-rich portion of the Co–Ti–Zr system
  7. On the role of alloying elements in the formation of serrated grain boundaries in Ni-based alloys
  8. Effect of drawing with shear on structure and properties of low-carbon steel
  9. Experimental study of FLD0 for aluminum alloy using digital image correlation with modified ISO method
  10. Global modeling for elevated temperature flow behavior of 6013 aluminum alloy during two-pass deformation
  11. The relationship between the pore size distribution and the thermo-mechanical properties of high alumina refractory castables
  12. Optimization of the phase composition of high-calcium-content slag for stabilization and the obtaining of hydraulic properties
  13. Short Communications
  14. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation
  15. Original Contributions
  16. Photoluminescence properties of Tb3+-doped stalk-like Al2O3
  17. Effect of deposition parameters on the crystal orientation and growth of Ag nanowires
  18. DGM News
  19. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.111338/pdf
Button zum nach oben scrollen