Research on the impact of rain ingestion considering s-shaped inlet distortion on the performance of a centrifugal compressor
-
He Wang
,
Xiangyang Liu
Abstract
To study the combined effects of engine rain ingestion and outlet distortion of the S-duct inlet on the performance of a centrifugal compressor, this research conducted numerical simulations with the M2129 inlet and a specific centrifugal compressor as the research objects. At the same operating point, under the inlet-compressor coupled simulation condition, the downstream guide cone of the compressor exerts a stagnation effect on the outlet cross-section of the inlet, resulting in a decrease in the Mach number in the central region. Under the rain ingestion state in the coupled simulation, water droplets undergo two stages of breakup along the flow path; meanwhile, the special structure of the S-duct inlet leads to their accumulation at the compressor inlet. Both inlet distortion and rain ingestion cause a decline in the compressor’s performance parameters.
Acknowledgments
The authors would like to thank Prof. Fengming Wang, Teacher Yibing Xu, and Classmate Xiangyang Liu from Nanjing University of Aeronautics and Astronautics (NUAA) for their support and assistance in this study. Additionally, the authors appreciate the access to the high-performance computing platform provided by NUAA.
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: All authors have accepted responsibility for the entire content of this manuscript and approved its submission.
-
Use of Large Language Models, AI and Machine Learning Tools: None declared.
-
Conflict of interest: The author states no conflict of interest.
-
Research funding: None declared.
-
Data availability: The core simulation results are presented in the figures and tables of this manuscript. Due to confidentiality requirements of the research project, the original input parameter files and full-scale geometric models cannot be publicly shared. However, the key simulation settings (e.g., turbulence model selection, mesh generation parameters) necessary for reproducing the main findings are detailed in the “Methodology” section of this paper; researchers may contact the authors for further clarification on non-confidential technical details.
References
1. Nikolaidis, T. Water ingestion effects on gas turbine engine performance [Ph.D. thesis]. Cranfield, UK: Cranfield University; 2003.Suche in Google Scholar
2. Murthy, SNB, Tsuchiy, T. Water ingestion into axial flow compressor, part I: analysis and predictions. Dayton, OH, USA: Air Force Wright Aeronautical Laboratories; AFWAl-TR-80-2090; 1980.Suche in Google Scholar
3. Berrier, BL, Allan, BG. Experimental and computational evaluation of flush-mounted, S-Duct inlets. In: 42nd AIAA aerospace sciences meeting and exhibit. Reno, NV, USA: AIAA; AIAA 2004-764; 2004.10.2514/6.2004-764Suche in Google Scholar
4. Gea, LM. CFD simulation of serpentine S-Duct with flow control. In: 51st AIAA/SAE/ASEE joint propulsion conference. Orlando, FL, USA: AIAA; AIAA 2015-3960; 2015.10.2514/6.2015-3960Suche in Google Scholar
5. Rudin, I, Arad, E, Cohen, J. Performance enhancement of boundary layer ingesting inlet using active flow control methods. In: Applied aerodynamics conference. Atlanta, GA, USA: AIAA; AIAA 2018-3066; 2018.10.2514/6.2018-3066Suche in Google Scholar
6. Fangchao, TIAN, Su, ZHAO, Yang, H. Simulation analysis of water ingestion process of S-shaped inlet. Aeroengine 2022;48:28–33. (in Chinese).Suche in Google Scholar
7. Dmytro, MV, Guoping, X, Chenzhou, L. Investigation of effects of radial distortion on transonic fan behavior. In: ASME 2010 3rd joint US-European fluids engineering summer meeting and 8th international conference on nanochannels, microchannels, and minichannels. Boston, MA, USA: ASME; FEDSM-ICNMM2010-30512; 2010.Suche in Google Scholar
8. Castaneda, J, Mehdi, A, Cugno, DD. A preliminary numerical CFD analysis of transonic compressor rotors when subjected to inlet swirl distortion. In: ASME turbo expo 2011: turbine technical conference and exposition. Las Vegas, NV, USA: ASME; GT2011-46560; 2011.10.1115/GT2011-46560Suche in Google Scholar
9. Fidalgo, VJ, Hall, CA, Colin, Y. A study of fan-distortion interaction within the NASA rotor 67 transonic stage. J Turbomach 2012;134:051011 1–12. https://doi.org/10.1115/1.4003850.Suche in Google Scholar
10. AGARD. Recommended practices for the assessment of the effects of atmospheric water ingestion on the performance and operability of gas turbine engines. Neuilly-sur-Seine, France: Advisory Report No332; 1995.Suche in Google Scholar
11. Williams, J, Freeman, C, Day, I. Rain ingestion in axial flow compressors at part speed. Reno, Nevada, USA: Proceeding of ASME; 2005:223–35 pp.10.1115/GT2005-68582Suche in Google Scholar
12. Theoklis, N. Water ingestion effects on gas turbine engine performance [Ph.D. thesis]. Cranfield, UK: Cranfield University; 2008.Suche in Google Scholar
13. Khan, JR, Wang, T. Three-dimensional modeling for wet compression in a single stage compressor including liquid particle erosion analysis. J Eng Gas Turbines Power 2011;133. https://doi.org/10.1115/1.4001828.Suche in Google Scholar
14. Flock, AK, Guildenbecher, DR, Chen, J, Sojka, PE, Bauer, HJ. Experimental statistics of droplet trajectory and air flow during aerodynamic fragmentation of liquid drops. Int J Multiphas Flow 2012;47. https://doi.org/10.1016/j.ijmultiphaseflow.2012.06.008.Suche in Google Scholar
15. AGARD Fluid Dynamics Panel Working Group 13. Air intakes for high speed vehicles. AGARD-AR-270, AGARD Advisory Report; 1991, vol. 270.Suche in Google Scholar
16. Liu, AC. Study on rain ingestion performance of turboshaft engine compression components. Harbin, China: Harbin Engineering University; 2022.Suche in Google Scholar
17. Williams, JC. Water ingestion in jet engines. University of Cambridge; 2003.Suche in Google Scholar
18. ANSYS Inc. ANSYS CFX-pre user guide 2016. USA: ANSYS Inc; 2016.Suche in Google Scholar
© 2025 Walter de Gruyter GmbH, Berlin/Boston
