Effect of the glass fiber length on the mechanical properties of long glass fiber reinforced polyphenylene sulfide
-
Hiroshi Yasuda
,
Yusuke Chiba
Abstract
The effects of the length of glass fibers on the toughness of long glass fiber reinforced polyphenylene sulfide (PPS) composites (PPS-LFT), made by the pulltrusion process, were studied with regards to both the molding V notched specimen and the cutting V notched specimen. Toughness was excellent on the molding V notched specimen. By observing the fracture morphology of the molded V notched specimen, it was found that a crack was formed, due to a slip or debonding at the fiber surface. The crack was propagated along the fiber, due to the pulling out of fibers from the matrix polymer. Both the maximum load and the fracture energy increased with increasing length of the glass fiber, because the resistance created by pulling out the fibers increased with increasing fiber length. In the case of PPS-LFT, it is understood that toughness improved because the slip between the fiber and the resin occurs before the excessive elastic strain energy is stored.
©2011 by Walter de Gruyter Berlin Boston
Artikel in diesem Heft
- Original Articles
- Selecting process parameter in injection molding via simulation optimization
- A multicriteria simulation optimization method for injection molding
- Approach to develop a screw configuration for compounding solid fillers on a twin screw extruder using the example of polyethylene-layered silicate masterbatches
- WIT: how to visualise, analyse, and control hollow space formationa
- Effect of the glass fiber length on the mechanical properties of long glass fiber reinforced polyphenylene sulfide
- Thermodynamic study of poly(ethylene glycol) in water/acetone solutions by viscometry
- Polymerization of N-methyl B-methyl amino borazine
- Graft copolymerization of granular starch maleate with acrylamide for enhancing grafting efficiency
- Nylon 6,12 fibers under low-dose gamma irradiation
Artikel in diesem Heft
- Original Articles
- Selecting process parameter in injection molding via simulation optimization
- A multicriteria simulation optimization method for injection molding
- Approach to develop a screw configuration for compounding solid fillers on a twin screw extruder using the example of polyethylene-layered silicate masterbatches
- WIT: how to visualise, analyse, and control hollow space formationa
- Effect of the glass fiber length on the mechanical properties of long glass fiber reinforced polyphenylene sulfide
- Thermodynamic study of poly(ethylene glycol) in water/acetone solutions by viscometry
- Polymerization of N-methyl B-methyl amino borazine
- Graft copolymerization of granular starch maleate with acrylamide for enhancing grafting efficiency
- Nylon 6,12 fibers under low-dose gamma irradiation
