Effect of compatibilizer on the properties of PBS/lignin composites prepared via a vane extruder
-
Huan Yu Liu
Abstract
Maleic anhydride (MAH) grafted polymers and silanes have been used as the compatibilizer in poly (butylene succinate)/lignin (PBS/lignin) composites. Compatibilized composites were fabricated by a novel vane extruder (VE). The effects of MAH grafted and coupling agent on the mechanical, thermal property, rheological property and water absorption of PBS/lignin were investigated. The results showed that the use of MAH grafted polymers and silanes resulted in significant improvements in flexural property, tensile modulus and tensile strength. Furthermore, MAH grafted polymers and silanes exhibited some improvement on the properties of vicat softening temperature as well as water absorption. The composites treated by MAH grafted polymers and silanes showed non-Newtonian behaviors from rheological tests. A better interfacial adhesion between lignin and matrix was observed from the scanning electron microscopy (SEM) of the compatibilized composites.
Acknowledgments
The authors are thankful for the support of the Program for the Fundamental Research Funds for the Central Universities (2014ZB0021), 973 Program (2012CB025902), China Postdoctoral Science Foundation Funded Project (2014M560664). Project supported by the Young Scientists Fund of the National Natural Science Foundation of China (Grant No. 51403068).
References
[1] Xie Y, Hill CA, Xiao Z, Militz H, Mai C. Compos. Part A: Appl. Sci. Manufac. 2010, 41, 806–819.10.1016/j.compositesa.2010.03.005Suche in Google Scholar
[2] Sahoo S, Seydibeyoğlu MÖ, Mohanty AK, Misra M. Biomass Bioenergy 2011, 35, 4230–4237.10.1016/j.biombioe.2011.07.009Suche in Google Scholar
[3] Li J, Luo X, Lin X. Mater. Des. 2013, 46, 902–909.10.1016/j.matdes.2012.11.054Suche in Google Scholar
[4] Kadla JF, Kubo S. Compos. Part A 2004, 35, 395–400.10.1016/j.compositesa.2003.09.019Suche in Google Scholar
[5] Huang J, Lu X, Zhang N, Yang L, Yan M, Liu H. Polym. Compos. 2014, 35, 53–59.10.1002/pc.22633Suche in Google Scholar
[6] Shih YF, Lee WC, Jeng RJ, Huang, CM. J. Appl. Polym. Sci. 2006, 99, 188–99.10.1016/j.annemergmed.2006.07.903Suche in Google Scholar
[7] Lee SM, Cho D, Park WH, Lee SG, Han SO, Drzal LT. Compos. Sci. Technol. 2005, 65, 647–657.10.1016/j.compscitech.2004.09.023Suche in Google Scholar
[8] Chen F, Guo R, Feng Y, Qu J. Acta. Polym. Sin. 2014, 4, 482–490.Suche in Google Scholar
[9] Feng Y, Shen H, Qu J, Liu B, He H, Han L. Polym. Eng. Sci. 2011, 51, 474–481.10.1002/pen.21852Suche in Google Scholar
[10] Sahoo S, Misra M, Mohanty AK. J. Appl. Polym. Sci. 2013, 127, 4110–4121.10.1002/app.37667Suche in Google Scholar
[11] Liu L, Yu J, Cheng L, Qu W. Compos. Part A: Appl. Sci. Manufac. 2009, 40, 669–674.10.1016/j.compositesa.2009.03.002Suche in Google Scholar
[12] Qu JP. Patent 10026054 CN, 2008.Suche in Google Scholar
[13] Chen F, Liu H, Zhao Y, Feng Y, Guo R, Wu Z. Polym. Compos. 2014, 35, 208.10.1002/pc.22652Suche in Google Scholar
[14] Qu J, Chen H, Liu S, Liu S, Tan B, Liu L, Yin X. J. Appl. Polym. Sci. 2013, 128, 3576–3585.10.1002/app.38573Suche in Google Scholar
[15] Qu J, Liu L, Tan B, Liu S, Liu H, Feng Y. Polym. Compos. 2012, 33, 185–191.10.1016/j.ijleo.2019.03.109Suche in Google Scholar
[16] Qu J, Yang Z, Yin X, He H, Feng Y. Polym.-Plast. Technol. 2009, 48, 1269.10.1080/03602550903204121Suche in Google Scholar
[17] Qu J, Zhang G, Chen H, Yin X, He H. Polym. Eng. Sci. 2012, 52, 2147–2156.10.1002/pen.23176Suche in Google Scholar
[18] Qu J, Zhao X, Li J, Cai S. J. Appl. Polym. Sci. 2013, 127, 3923–3932.10.1002/app.36806Suche in Google Scholar
[19] Jia S, Qu J, Zhai S, Huang Z, Wu C, Chen R, Feng Y. Polym. Compos. 2014, 35, 884–891.10.1002/pc.22732Suche in Google Scholar
[20] Qu J, Zhai S, Liu H, Chen H, Jia S, Huang Z, Zhao Y, Liu L. J. Appl. Polym. Sci. 2013, 130, 842–850.10.1002/app.39231Suche in Google Scholar
[21] Herrera-Franco P, Valadez-González A. Compos. Part B-Eng. 2005, 36, 597–608.10.1016/j.compositesb.2005.04.001Suche in Google Scholar
[22] Valadez-Gonzalez A, Cervantes-Uc J, Olayo R, Herrera-Franco P. Compos. Part B 1999, 30, 309–320.10.1016/S1359-8368(98)00054-7Suche in Google Scholar
[23] Rojo E, Oliet M, Alonso M, Saz-Orozco B, Rodriguez F. Polym. Eng. Sci. 2014, 54, 2228–2238.10.1002/pen.23772Suche in Google Scholar
[24] Liu L, Yu J, Cheng L, Yang X. Polym. Degrad. Stabil. 2009, 94, 90–94.10.1016/j.polymdegradstab.2008.10.013Suche in Google Scholar
[25] Gao H. The composites of wood flour/Maleic Anhydride Grafted Polyolefin Blends. PhD Thesis, Northeast Forestry University, China, 2011.Suche in Google Scholar
[26] Li M. Study on the preparation and properties of poly(latic acid)/poly(butylene succinate)/jute fiber composites. PhD Thesis, JiLin University, China, 2012.Suche in Google Scholar
[27] Gassan J, Bledzki AK. Compos. Part A: Appl. Sci. Manufac. 1997, 28, 1001–1005.10.1016/S1359-835X(97)00042-0Suche in Google Scholar
[28] Najafi SK, Kiaefar A, Hamidina E, Tajvidi M. J. Reinf. Plast. Compos. 2007, 26, 341–348.10.1177/0731684407072519Suche in Google Scholar
[29] Feng Y, Li Y, Xu B, Zhang D, Qu J, He H. Compos. Part B-Eng. 2013, 44, 193–199.10.1016/j.compositesb.2012.05.051Suche in Google Scholar
©2015 by De Gruyter
Artikel in diesem Heft
- Frontmatter
- Original articles
- Visualization and simulation of filling process of simultaneous co-injection molding based on level set method
- Effect of compatibilizer on the properties of PBS/lignin composites prepared via a vane extruder
- Fabrication and characterization of thermally conductive composites based on poly(butylene terephthalate)/glass fiber-silicon carbide
- Preparation and characterization of poly(MMA-EGDMA-AMPS) microspheres by soap-free emulsion polymerization
- Modification of biaxially oriented polypropylene films using dicyclopentadiene based hydrogenated hydrocarbon resin
- Investigation of synthesis and processing of cellulose, cellulose acetate and poly(ethylene oxide) nanofibers incorporating anti-cancer/tumor drug cis-diammineplatinum (II) dichloride using electrospinning techniques
- Grafting poly(2-acryloyloxyethyl trimethyl ammonium chloride) branches onto the backbones of corn starch for toughening starch film
- Erosion characteristics of Teflon under different operating conditions
- Development of sustainable resource based poly(urethane-etheramide)/Fe2O3 nanocomposite as anticorrosive coating materials
Artikel in diesem Heft
- Frontmatter
- Original articles
- Visualization and simulation of filling process of simultaneous co-injection molding based on level set method
- Effect of compatibilizer on the properties of PBS/lignin composites prepared via a vane extruder
- Fabrication and characterization of thermally conductive composites based on poly(butylene terephthalate)/glass fiber-silicon carbide
- Preparation and characterization of poly(MMA-EGDMA-AMPS) microspheres by soap-free emulsion polymerization
- Modification of biaxially oriented polypropylene films using dicyclopentadiene based hydrogenated hydrocarbon resin
- Investigation of synthesis and processing of cellulose, cellulose acetate and poly(ethylene oxide) nanofibers incorporating anti-cancer/tumor drug cis-diammineplatinum (II) dichloride using electrospinning techniques
- Grafting poly(2-acryloyloxyethyl trimethyl ammonium chloride) branches onto the backbones of corn starch for toughening starch film
- Erosion characteristics of Teflon under different operating conditions
- Development of sustainable resource based poly(urethane-etheramide)/Fe2O3 nanocomposite as anticorrosive coating materials
