Research on the vibro-acoustic propagation characteristics of a large mining two-stage planetary gear reducer

References

[1] J. Liu, Y. Xu, Y. Shao, et al., “The effect of a localized fault in the planet bearing on vibrations of a planetary gear set,” J. Strain Anal. Eng. Des., 2018.10.1177/0309324718769491Suche in Google Scholar

[2] W. Yang and X. Tang, “Numerical analysis for heat transfer laws of a wet multi-disk clutch during transient contact,” Int. J. Nonlinear Sci. Numer. Stimul., vol. 18, nos 7–8, pp. 599–613, 2017, https://doi.org/10.1515/ijnsns-2017-0081.Suche in Google Scholar

[3] W. Yang and X. Tang, “Modelling and modal analysis of a hoist equipped with two-stage planetary gear transmission system,” in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 231, 4, 2017, pp. 739–749.10.1177/1464419316684067Suche in Google Scholar

[4] X. Tang, D. Zhang, T. Liu, A. Khajepour, H. Yu, and H. Wang, “Research on the energy control of a dual-motor hybrid vehicle during engine start-stop process,” Energy, vol. 166, pp. 1181–1193, 2019, https://doi.org/10.1016/j.energy.2018.10.130.Suche in Google Scholar

[5] A. Strozzi, E. Bertocchi, S. Mantovani, et al.., “Analytical evaluation of the peak contact pressure in a rectangular elastomeric seal with rounded edges,” J. Strain Anal. Eng. Des., vol. 51, no. 4, pp. 304–317, 2016, https://doi.org/10.1177/0309324715612300.Suche in Google Scholar

[6] X. Tang, W. Yang, X. Hu, et al.., “A novel simplified model for torsional vibration analysis of a series-parallel hybrid electric vehicle,” Mech. Syst. Signal Process., vol. 85, pp. 329–338, 2017, https://doi.org/10.1016/j.ymssp.2016.08.020.Suche in Google Scholar

[7] Y. Qin, C. Wei, X. Tang, et al.., “A novel nonlinear road profile classification approach for controllable suspension system: simulation and experimental validation,” Mech. Syst. Signal Process., vol. 125, pp. 79–98, 2019, https://doi.org/10.1016/j.ymssp.2018.07.015.Suche in Google Scholar

[8] X. Tang, X. Hu, W. Yang, et al.., “Novel torsional vibration modeling and assessment of a power-split hybrid electric vehicle equipped with a dual mass flywheel,” IEEE Trans. Veh. Technol., vol. 67, no. 3, pp. 1990–2000, 2018, https://doi.org/10.1109/tvt.2017.2769084.Suche in Google Scholar

[9] X. Tang, W. Yang, D. Zhang, et al.., “A novel two degree-of-freedom dynamic model of a full hybrid vehicle,” Int. J. Electr. Hybrid Veh. (IJEHV), vol. 9, no. 1, pp. 67–77, 2017, https://doi.org/10.1504/ijehv.2017.082817.Suche in Google Scholar

[10] A. Kahraman, “Effect of axial vibrations on the dynamics of a helical gear pair,” J. Vib. Acoust., vol. 115, no. 1, pp. 33–39, 1993, https://doi.org/10.1115/1.2930311.Suche in Google Scholar

[11] P. Y. Wang and X. L. Cai, “Vibrational analysis of planetary gear trains by finite element method,” J. Vibroeng., vol. 14, no. 4, pp. 1450–1458, 2013.10.4028/www.scientific.net/AMM.284-287.1012Suche in Google Scholar

[12] V. Abousleiman and P. Velex, “A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analyses of planetary/epicyclical gear sets,” Mech. Mach. Theor., vol. 41, pp. 725–748, 2006, https://doi.org/10.1016/j.mechmachtheory.2005.09.005.Suche in Google Scholar

[13] D. R. Kiracofe and R. G. Parker, “Structured vibration modes of general compound planetary gear systems,” J. Vib. Acoust., vol. 129, pp. 1–16, 2007, https://doi.org/10.1115/1.2345680.Suche in Google Scholar

[14] G. Roulois, Y. Skiadanek, F. Marrot, and J. Caillet, “Dynamic and acoustic simulation of helicopters,” in International Gear Conference, 2014, pp. 437–446.10.1533/9781782421955.437Suche in Google Scholar

[15] J. BihR, M. Heider, M. Otto, et al., “Gear noise prediction in automotive transmissions,” in International Gear Conference, 2014, pp. 457–465.10.1533/9781782421955.457Suche in Google Scholar

[16] M. Shuai, Z. Yidu, and W. Qiong, “Research on multiple-split load sharing of two-stage star gearing system in consideration of displacement compatibility,” Mech. Mach. Theor., vol. 88, pp. 1–15, 2015, https://doi.org/10.1016/j.mechmachtheory.2015.01.005.Suche in Google Scholar

[17] M. Shuai, Z. Yidu, W. Qiong, et al., “Load sharing behavior analysis method of wind turbine gearbox in consideration of multiple-errors,” Renew. Energy, vol. 97, pp. 481–491, 2016.10.1016/j.renene.2016.05.058Suche in Google Scholar

[18] R. Gunda and S. Vijayakar, Acoustic Radiation from an Automotive Gear Box, SAE Technical Paper 2007-01-2170, 2007, https://doi.org/10.4271/2007-01-2170.Suche in Google Scholar

[19] Y. Guo, T. Eritenel, T. M. Ericson, and R. G. Parker, “Vibro-acoustic propagation of gear dynamics in a gear-bearing-housing system,” J. Sound Vib., vol. 333, pp. 5762–5785, 2014, https://doi.org/10.1016/j.jsv.2014.05.055.Suche in Google Scholar

[20] V. Kumar Ambarisha, S.-E. Chen, S. Vijayakar, and J. Mendoza, Time-domain Dynamic Analysis of Helical Gears with Reduced Housing Model, SAE Technical Paper 2013-01-1898, 2v013, https://doi.org/10.4271/2013-O1-1898.Suche in Google Scholar

[21] J.-S. Choil, H.-A. Leel, and J.-Y. Lee, “Structural optimization of an automobile transmission case to minimize radiation noise using the model reduction technique,” J. Mech. Sci. Technol., vol. 25, no. 5, pp. 1247–1255, 2011, https://doi.org/10.1007/s12206-011-0135-3.Suche in Google Scholar

[22] T. Ide, M. Otomori, J. P. Leiva, and B. Watson, “Structural optimization methods and techniques to design light and efficient automatic transmission of vehicles with low radiated noise,” Struct. Multidiscip. Optim., vol. 50, pp. 1137–1150, 2014, https://doi.org/10.1007/s00158-014-1143-6.Suche in Google Scholar

[23] X. Wang, Finite Element Method, Beijing, Tsinghua University Press, 2003.Suche in Google Scholar

[24] W. Yang, X. Tang, and X. Chen, “Nonlinear modelling and transient dynamics analysis of a hoist equipped with a two-stage planetary gear transmission system,” J. Vibroeng., vol. 17, pp. 1392–8716, 2015.Suche in Google Scholar

[25] X. Tang, L. Zou, W. Yang, Y. Huang, and H. Wang, “Novel mathematical modelling methods of comprehensive mesh stiffness for spur and helical gears,” Appl. Math. Model., vol. 64, pp. 524–540, 2018, https://doi.org/10.1016/j.apm.2018.08.003.Suche in Google Scholar

[26] X. Zhang, X. Tang, and W. Yang, “Analysis of transmission error and load distribution of a hoist two-stage planetary gear system,” in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 233, 1, 2019, pp. 3–16.10.1177/1464419318770886Suche in Google Scholar

[27] Y. Qin, X. Tang, T. Jia, et al.., “Noise and vibration suppression in hybrid electric vehicles: state of the art and challenges,” Renew. Sust. Energy Rev., vol. 124, p. 109782, 2020, https://doi.org/10.1016/j.rser.2020.109782.Suche in Google Scholar