Startseite Design of Microstrip Lowpass Filter Using bend Configuration with Excellent sharpness in Transition Band
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Design of Microstrip Lowpass Filter Using bend Configuration with Excellent sharpness in Transition Band

  • Seyed Mohammad Hadi Mousavi EMAIL logo , Seyed Vahab Al-Din Makki und Hesam Siahkamari
Veröffentlicht/Copyright: 16. April 2016
Veröffentlichen auch Sie bei De Gruyter Brill
Frequenz
Aus der Zeitschrift Frequenz Band 70 Heft 5-6

Abstract

In this letter, a microstrip lowpass filter (LPF) using bend configuration with several excellent features such as a compact size, great roll-off rate and high rejection in the stopband is presented. This structure is composed of a spiral transmission line loaded by several stepped impedance and T-shaped resonators. The cut-off frequency of the proposed filter is equal to 2.73 GHz and the transition band is from 2.73 up to 2.82 GHz with –3 and –20 dB attenuation point, respectively, which represents a very high sharpness in the transition band. To achieve a –40 dB rejection level in the stopband, multiple open stub and T-shaped patches are utilized. An acceptable agreement between EM-simulation and measurement results is observed.

References

[1] J. S. Hong and M. J. Lancaster, Microstrip Filters for RF/Microwave Applications, 2nd ed. New York: Wiley, 2011.10.1002/9780470937297Suche in Google Scholar

[2] F. Wei, L. Chen, and X. -W. Shi, “Compact lowpass filter based on coupled-line hairpin unit,” Electron. Lett., vol. 48, no. 7, pp. 379–381, 2012.10.1049/el.2011.3811Suche in Google Scholar

[3] M. Mirzaee and B. S. Virdee, “Realisation of highly compact planar lowpass filter for UWB RFID applications,” Electron. Lett., vol. 49, no. 22, pp. 1396–1398, 2013.10.1049/el.2013.2409Suche in Google Scholar

[4] X. B. Wei, P. Wang, M. Q. Liu, and Y. Shi, “Compact wide-stopband lowpass filter using stepped impedance hairpin resonator with radial stubs,” IEEE Electron. Lett., vol. 47, no. 15, pp. 862–863, 2011.10.1049/el.2011.1414Suche in Google Scholar

[5] V. K. Velidi and S. Sanyal, “Sharp roll-off lowpass filter with wide stopband using stub-loaded coupled-line hairpin unit,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 6, pp. 301–303, 2011.10.1109/LMWC.2011.2132120Suche in Google Scholar

[6] J. -L. Li, S. -W. Qu, and Q. Xue, “Compact microstrip lowpass filter with sharp roll-off and wide stopband,” Electron. Lett., vol. 45, no. 2, pp. 110–111, 2009.10.1049/el:20093246Suche in Google Scholar

[7] K. Ma and K. S. Yeo, “New ultra-wide stopband low-pass filter using transformed radial stubs,” IEEE Trans. Microw. Theory. Tech., vol. 59, no. 3, pp. 604–611, 2011.10.1109/TMTT.2010.2095031Suche in Google Scholar

[8] C. -J. Wang and T. H. Lin, “A multi-band meandered slotted-ground plane resonator and its application of lowpass filter,” Prog. Electromag. Res., vol. 120, pp. 249–262, 2011.10.2528/PIER11072203Suche in Google Scholar

[9] G. Karimi, M. Yazdani, H. Siahkamari, and A. Lalbakhsh, “Design of microstrip LPF with sharp cut-off frequency and wide stopband,” Frequenz, vol. 68, no. 7–8, pp. 313–319, 2014.10.1515/freq-2013-0113Suche in Google Scholar

[10] H. Sariri, Z. Rahmani, A. Lalbakhsh, and M. S. Compact, “LPF using T-shaped resonator,” Frequenz, vol. 67, no. 1–2, pp. 17–20, 2013.10.1515/freq-2012-1043Suche in Google Scholar

Received: 2015-5-2
Published Online: 2016-4-16
Published in Print: 2016-5-1

©2016 by De Gruyter

Heruntergeladen am 21.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/freq-2015-0096/html
Button zum nach oben scrollen