Layouts and tips for a typical final-year chemical engineering graduation project
-
Anees A. Khadom
Abstract
A fundamental step in the education and scientific research processes is the final-year project for undergraduate students. In chemical engineering departments, the final year project has unique properties since it deals with the design and production of specific materials or chemicals. It represents a whole plant design. In the present work, a layout and tips are proposed for a typical final-year chemical engineering graduation project. Six chapters are suggested. Each chapter is given a main theme and subtitles in order to facilitate the writing process of the project. Chapter one represents an introduction to the importance of the material that was produced, material properties, production process, etc. In chapter two, material and energy balance calculations are addressed. Chapter three handled the equipment design. Cost and environmental assessments are discussed in Chapter four. The results of chapters two and three are compared with software outcomes, which can be collected in chapter five. Finally, the main results, conclusion, and recommendations for future work are proposed to be in Chapter six. Furthermore, tips and advice are addressed to assist students in the writing of a typical graduation project.
Acknowledgments
The author acknowledges the support of the College of Engineering, Department of Chemical Engineering at University of Diyala.
-
Research ethics: Not applicable.
-
Author contributions: The author has accepted responsibility for the entire content of this manuscript and approved its submission.
-
Competing interests: The author state no conflict of interest.
-
Research funding: None declared.
-
Data availability: Not applicable.
References
1. Maniyappan, A. Effectiveness of structured teaching programme on recent advances in robotic rehabilitation among final year BSc nursing students in South India, India. Asian J Nurs Educ Res 2020;10:79–83. https://doi.org/10.5958/2349-2996.2020.00018.x.Suche in Google Scholar
2. Morales-Botello, ML, Moreno Martínez, C. Semi-guided learning tool as framework for STEM students learning: a case study for final year projects. Educ Inf Technol 2023;28:1535–57. https://doi.org/10.1007/s10639-022-11231-0.Suche in Google Scholar PubMed PubMed Central
3. Cobos, M, Roger, S, Lopez, JJ, Gonzalez, A. Final year projects in electrical and information engineering: tips for students and supervisors. In: 2009 EAEEIE annual conference. New York, USA: IEEE; 2009:1–5 pp.10.1109/EAEEIE.2009.5335487Suche in Google Scholar
4. Kuh, GD. Excerpt from high-impact educational practices: what they are, who has access to them, and why they matter. Assoc Am Coll Univ 2008;14:28–9.Suche in Google Scholar
5. Brereton, OP, Lees, S, Bedson, R, Boldyreff, C, Drummond, S, Layzell, P, Young, R. Student collaboration across universities: a case study in software engineering. In: Thirteenth conference on software engineering education and training. New York, USA: IEEE; 2000:76–86 pp.10.1109/CSEE.2000.827025Suche in Google Scholar
6. Morad, AH. The reality of university education in Iraq: problems and solutions through adoption of credit hours system. Eng Technol J 2019;37:487–91. https://doi.org/10.30684/etj.37.4c.18.Suche in Google Scholar
7. Himmelblau, DM, Riggs, JB. Basic principles and calculations in chemical engineering. Michigan, USA: FT press; 2012.Suche in Google Scholar
8. Ricaurte, M, Viloria, A. Project-based learning as a strategy for multi-level training applied to undergraduate engineering students. Educ Chem Eng 2020;33:102–11. https://doi.org/10.1016/j.ece.2020.09.001.Suche in Google Scholar
9. Sinnott, R, Richardson, JF, Coulson, JM. Chemical engineering: an introduction to chemical engineering design. New York, USA: Elsevier; 2013.Suche in Google Scholar
10. Sambudi, NS, Ramli, RM. Integrated project as innovative assessment to enhance learning experience in thermodynamics class. ASEAN J Sci Eng Educ 2021;1:167–76. https://doi.org/10.17509/ajsee.v1i3.40896.Suche in Google Scholar
11. McCabe, WL, Smith, JC, Harriott, P. Unit operations of chemical engineering. New York: McGraw-Hill; 1993, vol 5:154 p.Suche in Google Scholar
12. Khan, F, Amyotte, P, Adedigba, S. Process safety concerns in process system digitalization. Educ Chem Eng 2021;34:33–46. https://doi.org/10.1016/j.ece.2020.11.002.Suche in Google Scholar
13. Prett, DM, García, CE. Fundamental process control: butterworths series in chemical engineering. Stoneham, Massachusetts, USA: Butterworth-Heinemann; 2013.Suche in Google Scholar
14. Sinnott, RAY. Chemical engineering design. New York, USA: Elsevier; 2014, vol 6.Suche in Google Scholar
15. Peters, MS, Timmerhaus, KD, West, RE. Plant design and economics for chemical engineers. New York: McGraw-Hill; 2003, vol 4.Suche in Google Scholar
16. Haydary, J. Chemical process design and simulation: aspen Plus and aspen Hysys applications. Hoboken, New Jersey: John Wiley & Sons; 2019.10.1002/9781119311478Suche in Google Scholar
© 2024 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Review
- Computational chemistry unveiled: a critical analysis of theoretical coordination chemistry and nanostructured materials
- Research Articles
- Reducing sludge formation by enhancing biological decay of biomass: a mathematical model
- Numerical investigation of discharge pressure effect on steam ejector performance in renewable refrigeration cycle by considering wet steam model and dry gas model
- Natural pigment indigoidine production: process design, simulation, and techno-economic assessment
- Energy efficiency in cooling systems: integrating machine learning and meta-heuristic algorithms for precise cooling load prediction
- A parametric study on syngas production by adding CO2 and CH4 on steam gasification of biomass system using ASPEN Plus
- Temperature optimization model to inhibit zero-order kinetic reactions
- Multi-objective Bonobo optimisers of industrial low-density polyethylene reactor
- Assessment the thermal performance of square twisted double tube heat exchanger with Al2O3 nanofluid
- Short Communication
- Layouts and tips for a typical final-year chemical engineering graduation project
Artikel in diesem Heft
- Frontmatter
- Review
- Computational chemistry unveiled: a critical analysis of theoretical coordination chemistry and nanostructured materials
- Research Articles
- Reducing sludge formation by enhancing biological decay of biomass: a mathematical model
- Numerical investigation of discharge pressure effect on steam ejector performance in renewable refrigeration cycle by considering wet steam model and dry gas model
- Natural pigment indigoidine production: process design, simulation, and techno-economic assessment
- Energy efficiency in cooling systems: integrating machine learning and meta-heuristic algorithms for precise cooling load prediction
- A parametric study on syngas production by adding CO2 and CH4 on steam gasification of biomass system using ASPEN Plus
- Temperature optimization model to inhibit zero-order kinetic reactions
- Multi-objective Bonobo optimisers of industrial low-density polyethylene reactor
- Assessment the thermal performance of square twisted double tube heat exchanger with Al2O3 nanofluid
- Short Communication
- Layouts and tips for a typical final-year chemical engineering graduation project
