STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Ikonomopoulos G.,; Marchetti M.,

doi:10.1515/SECM.1999.8.2.83

Startseite STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Artikel Open Access

STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY

Ikonomopoulos G., und Marchetti M.,

Veröffentlicht/Copyright: 1. April 1999

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift Science and Engineering of Composite Materials Band 8 Heft 2

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

G.,, Ikonomopoulos and M.,, Marchetti. "STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY" Science and Engineering of Composite Materials, vol. 8, no. 2, 1999, pp. 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, I. & M.,, M. (1999). STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials, 8(2), 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, I. and M.,, M. (1999) STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials, Vol. 8 (Issue 2), pp. 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G.,, Ikonomopoulos and M.,, Marchetti. "STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY" Science and Engineering of Composite Materials 8, no. 2 (1999): 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

G., I, M., M. STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY. Science and Engineering of Composite Materials. 1999;8(2): 83-98. https://doi.org/10.1515/SECM.1999.8.2.83

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 1999-04

Artikel in diesem Heft

TABLE OF CONTENTS
The Effect of the Chemical Metamerism Polyolefin on the Friction and Wear of Bronze Powder Filled High Density Polyethylene
STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY
The Accumulated Dissipated Energy of Composites Under Fatigue Loadings
Brazing of Silicon Nitride with Reactive Filler Metals
Deep Drawing Simulation of Knitted Fabric Composites Considering Geometrical Non-Linearity

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/SECM.1999.8.2.83

Creative Commons

BY-NC-ND 3.0

Artikel in diesem Heft

TABLE OF CONTENTS
The Effect of the Chemical Metamerism Polyolefin on the Friction and Wear of Bronze Powder Filled High Density Polyethylene
STRUCTURAL COMPOSITE LAMINATES OPTIMISATION CYCLE COUPLED WITH A COMPUTER AIDED MANUFACTURING PROCESS: AN APPLICATION INTO RESIN TRANSFER MOULDING TECHNOLOGY
The Accumulated Dissipated Energy of Composites Under Fatigue Loadings
Brazing of Silicon Nitride with Reactive Filler Metals
Deep Drawing Simulation of Knitted Fabric Composites Considering Geometrical Non-Linearity