Volume 18, Issue 12

Continuous flow microwave sterilization for liquid food has advantages of a short time and high retention rate of nutrients. However, uneven microwave heating is the critical factor restricting the industrialization of microwave sterilization. This paper reviews the up-to-date research on the continuous flow microwave heating and the continuous flow microwave sterilization system for liquid food. The causes of the non-uniformity of continuous flow microwave heating are thoroughly discussed and the methods of improving the uniformity are proposed. Finally, the recommendations for future research of continuous flow microwave sterilization for liquid food are presented.

Baijiu, the national liquor of China, is produced using traditional solid-state fermentation (SSF). SSF automation during compound flavor baijiu (CFB) production can considerably reduce labor intensity and required manpower, improve the working environment, decrease costs, and increase efficiency. The approaches for SSF automation in CFB production can provide a reference for the automation of SSF in other industries. Therefore, this review compares the traditional and automated processes for jiuqu starter production, SSF, and solid-state distillation during baijiu brewing. Furthermore, specific applications of automation technology and equipment are summarized for each process. The problems and challenges associated with the automation of the process are then detailed and future development directions are proposed. Thus, this review provides an overall introduction to and insight into the developments and challenges in the automation of the CFB brewing process, helping to promote automation in the brewing of other baijiu flavor classes and SSF products.

Dextran problem restricts the development of the sugar industry. Although the enzymatic treatment based on α-dextranase from Chaetomium gracile (α-dextranase (CG)) has been effective in solving this issue, the lack of immobilization products hinder its industrial applications. This research described a novel and suitable method to immobilize α-dextranase (CG) . The purified α-dextranase (CG) was immobilized via cross-linking using modified chitosan as carriers. In addition, this study used a deep eutectic solvent that greatly improved the enzymatic properties of immobilized α-dextranase (CG) . α-dextranase (CG) was immobilized by adding deep eutectic solvent (DES-IM-α-dextranase (CG)) showed better temperature tolerance and storage properties than free and ordinary immobilized counterparts. It can eliminate dextran by 59.71% in mixed sugarcane juice and 38.71% in clarified sugarcane juice. The achieved results were considerably better than those obtained using free and other immobilized enzymes. Altogether, these findings confirmed that DES-IM-α-dextranase (CG) displayed great potential in solving the dextran problem.

This study aimed to develop functional emulsions with dietary fibre/proteins and to examine the role of interfacial rheological properties on the emulsion stability. Emulsions with inulin and various animal/vegetable proteins were prepared, and their emulsifying and interfacial rheological properties were appraised for their possible applications in stabilizing oil-in-water emulsions. Interfacial measurements including the frequency, time and strain sweep test were determined depending on the protein differences. The results revealed that the adsorption behaviour of proteins at the two interfaces was quite different. The apparent viscosity ( η 50 ) of the emulsions ranged between 0.006 and 0.037 Pa s. The highest interfacial viscosity ( η i ) values at low shear rates were determined in the mixture of egg protein-inulin at the oil/water interface. In particular, the interfacial properties of egg protein were not similar to those of other proteins. This study indicated that interfacial rheological properties and emulsifying properties of the proteins were influenced by the presence of inulin which contributes to the existing body of knowledge on the preparation of the prebiotic emulsions with proteins.

This study aims to simulate the effect of the drier humidity distribution on the temperature distribution and dried product shrinkage. The Lebanese yellow apple (Golden Delicious) was prepared in the form of slices with 3 and 5 mm thicknesses and dried at 60 °C in a hot air oven. Shrinkage models were determined by fitting the experimental data with Sigmaplot software. The simulation was done using these equations in COMSOL software. The simulation results showed that due to the accumulation of air humidity in one part of the oven, the temperature distribution inside the product was not distributed evenly in that part. This phenomenon caused the imbalance of moisture transfer from the product and this can increase the drying time as well as unbalanced shrinkage of the product. Finally, it was found that the air humidity distribution inside the oven had a significant effect on the drying process and shrinkage rate of samples.