Volume 17, Issue 5

In this study, rice bran protein was prepared by ultrasound-assisted extraction, and its physicochemical and emulsifying properties were also evaluated. Results demonstrated that a significant increase in protein yield was observed when ultrasound-assisted method was employed for extracting protein. Noticeably, obtained rice bran protein possessed excellent physicochemical properties, such as oil absorption capacity, protein solubility and foaming property. More hydrophobic groups were exposed in the process of ultrasound-assisted extraction, which led to the increase of surface hydrophobicity. More importantly, the ultrasound-assisted extraction could improve emulsifying properties of rice bran protein, and the emulsions prepared using protein samples exhibited the great stability. Besides, it was also found that emulsifying properties of protein samples presented a decrease trend with increasing ultrasound power and time. All in all, ultrasound-assisted extraction is a suitable alternative process for preparing rice bran protein.

Adulteration of beef with cheap chicken has become a growing problem worldwide. In this study, a quick, single primer-triggered isothermal amplification (SAMP) combined with a fast nucleic acid extraction method was employed to detect the chicken meat in adulterated beef. Chicken from adulterated beef was identified using the chicken species-specific primer designed according to the Gallus gallus mitochondrial conserved sequences. Our SAMP method displayed good specificity and sensitivity in detecting chicken and beef meat DNA–the limit of detection (LOD) of SAMP is 0.33 pg/μL of chicken and beef total DNA and 2% w/w chicken meat in beef. The whole work flow from DNA extraction to signal detection can be finished within 1 h, fulfilling the requirement of on-site meat species identification.

Even though the evaporation is a common process in the food industry, there is scarce information about the convective coefficient evaluation as an important parameter for equipment and process design. A research on evaporation of sugar solution in a double effect was carried out. The experimental results obtained in this equipment, from the heat transfer and concentration processes are presented, a range of 2658–6091 W of heat flow was quantified implying computed values of 1431–3763 W/m 2 K for the convective coefficients and 1020–1815 W/m 2 K for the overall coefficient. The quantification of the convective coefficient, the fitting methodology and modeling were developed in order, to obtain the correspondent correlations. Then, from a set of several equations, two general relationships are proposed. Both correlations were applied to experimental and supposed data, finding a difference lower than 30% between the experimental and predicted values of the Nusselt number, that was considered as satisfactory.

The proximate composition, molecular weight distribution and main processing properties of waxy corn flour (WCF) were investigated. Furthermore, waxy corn starch (WCS) and waxy rice flour (WRF) were also determined to discuss the applications of WCF. WCS contained more low-molecular-weight fraction (<5 × 10 5  g/mol) and had higher polydispesity than waxy rice starch (WRS). The water hydration capacity of WCF was the lowest, whereas it had the highest swelling power at 70 and 80 °C. WCF had the highest pasting temperature of 74.85 °C, whereas that of WRF was 68.40 °C and WCS was 73.25 °C. WRF exhibited the lowest melting enthalpy change with a value of 2.54 ± 0.11 (J/g). The retrogradation resistance of WCF was better than that of WRF and WCS. The degree of retrogradation (DR) of WCF was 9.58 ± 0.59% at 14 d, corresponding to WCS of 25.08 ± 0.44% and WRF of 15.68 ± 0.71%. WRF had the lowest glass transition temperature of −27.4 versus −26.2 °C for WCF and −26.0 °C for WCS. It was found that WCF could be used to directly prepare quick-frozen viscous foods. It could also be used as a stabilizer to improve the quality of staple foods.

Determination of Cabernet Sauvignon grapes quality plays an important role in commercial processing. In this research, a rapid approach based on near infrared spectroscopy was proposed to the determination of soluble solids content (SSC), pH, and total phenol content (TPC) in entire bunches of Cabernet Sauvignon grapes. Standardized normal variate (SNV) and competitive adaptive weighted sampling (CARS), genetic algorithm (GA), and synergy interval partial least squares (si-PLS) were used to optimize the spectral data. With optimal combination input, the prediction accuracy of partial least squares regression (PLSR) and support vector regression (SVR) models was compared. The results showed that these models based on variable optimization method could predict well the SSC, pH, and TPC of Cabernet Sauvignon grapes. The correlation coefficient of prediction for SSC, pH, and TPC had reached more than 0.85. This work provides an alternative to analyze the chemical parameters in whole bunch of Cabernet Sauvignon grape.

The study investigated the effects of the addition of 0% (control group, CG), 0.25, 0.35, and 0.45% superfine smashed okra powder (SSOP) or carrageenan (CAR), and 0.25% SSOP – 0.35% CAR complex (OC) on the quality of chicken meatballs. Chicken meatballs fabricated with the SSOP-CAR complex showed better quality as compared to the other treatments. The lowest cooking loss was observed in the OC group, which corresponded to significantly decreased relaxation times of low-field nuclear magnetic resonance (LF-NMR) ( T 21 and T 22 ) ( P  < 0.05). Compared to CG, The L * and a * values of chicken meatballs were significantly decreased due to the addition of SSOP ( P  < 0.05), and the additions of SSOP and CAR significantly increased the storage modulus ( G ′) and loss modulus of chicken meat batter upon heating ( P  < 0.05). Besides, the OC and 0.45% CAR groups showed the highest texture profile values for hardness and chewiness ( P  < 0.05). The sensory evaluation revealed that the chicken meatballs emulsified with the OC had the best overall acceptability. The results indicated that OC could be a great feasible and potential application in the meat industry, especially in the development of functional emulsified meat products.

Understanding the gastric digestion process is essential for evaluating the bioaccessibility of nutrients from food matrices. The objective of this study was to investigate the kinetics of disintegration and gastric emptying patterns in a 3D printed stomach (ARK ® ) with white rice as the study sample. Modified power exponential model was used to fit the gastric retention data and the average t 1/2 and t lag values of the solid fractions were found to be 109.22 ± 4.20 and 84.16 ± 5.72 min, respectively. During the disintegration process, the weight percentage of medium size particles (∼0.35 mm) was found to be higher at 30 and 60 min. Moreover, there was a sharp decrease in the percentage of fine particles (<0.125 mm) at 90 and 120 min. The ARK ® could effectively mimic the physiochemical process of the human stomach, providing promising insights for future studies on the development of novel and functional food products.

This study was to investigate the effect of different drying methods on the drying kinetics, physical properties, and bioactivity of Platycodon grandiflorum (PG). Four drying methods were employed to conduct the dehydrated process, namely, hot air drying (AD), vacuum drying (VD), microwave hot airflow rolling-bed drying (MHARD), and pulse-spouted microwave vacuum drying (PSMVD). PSMVD showed the highest drying rate among four drying methods based on the result of fitting first-order reaction model. And PSMVD-dried product showed higher rehydration ratio and better mechanical properties, suggesting a better rehydration characteristic. In addition, considering the content of Platycodin D, PSMVD is a promising drying technology for the dehydration of PG.

This research was focused on the evaluation of selected parameters of coffee quality, regarding the beverage preparation method, using high-performance liquid chromatography. Samples of Coffea arabica from South America were analyzed. For the preparation of the final beverage were used filtration and moka methods. All samples roasted at medium dark roasting level Full City ++, contained less than 5% of moisture. The values of pH and dry matter content did not show a significant difference. The lowest content of chlorogenic acid reached value (1.41 g·100 g −1 ) prepared from filtration and 1.49 g·100 g −1 prepared from moka method. The highest content of chlorogenic acid ranged from 2.94 g. 100 g −1 filtration method and 3.36 g. 100 g −1 moka. Similarly, caffeine content, showed lower values using the filtration method. Values ranged from 1.37 to 1.57% (filtration) and from 1.54 to 1.78% (moka). However, PCA didn’t show a significant difference.