Coating: Effect of base paper grammage and electrolyte content on electrical and dielectric properties of coated papers

Artikel in diesem Heft

1. Mechanical Pulping: High consistency hydrogen peroxide bleaching of mechanical pulps with varying amounts of fines
2. Mechanical Pulping: Birch pulp fractions for fine paper and board
3. Paper chemistry: Wet pressing of wheat straw pulp – correlations between dewatering parameters
4. Paper Chemistry: Influence of pH on the adsorption of dissolved and colloidal substances in a thermo-mechanical pulp filtrate onto talc
5. Paper chemistry: Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 1. Adsorption
6. Paper Chemistry: Interactions of thermo mechanical pulp fractions with high molar mass cationic polyacrylamides: Part 2. Flocculation
7. Coating: Effect of base paper grammage and electrolyte content on electrical and dielectric properties of coated papers
8. Paper physics: TMP long fibres as reinforcement pulp. Part 1. Laboratory tests
9. Paper physics: TMP long fibres as reinforcement pulp Part 2. Pilot tests
10. Paper physics: Experimental study of non-linear stress relaxation and creep of paper materials and the relation between the two types of experiments
11. Paper Physics: Modeled and measured bending stiffness of polyethylene coated solid fiberboard
12. Paper physics: Measuring the out-of-plane shear strength profiles in different paper qualities
13. Printing: Measuring the Penetration Properties of Starch-Treated Wood-Free Paper
14. Printing: The role of binder type in determining inkjet print quality
15. Printing: Methods for measuring and predicting the printability of paper Printing Methods for measuring and predicting the printability of paper
16. Papermaking: Simulation-based Optimization and Decision Support for Conflicting Objectives in Papermaking