ToF-SIMS characterization of modified starch on fine and LWC base papers

Artikel in diesem Heft

1. A novel method for washing lignin precipitated from kraft black liquor – Laboratory trials
2. Pressurized hydrogen peroxide bleaching of Eucalyptus globulus pulps. Part I: Effect of process variables
3. Pressurized hydrogen peroxide bleaching of Eucalyptus globulus pulps. Part II: Kinetics
4. Simulation of tensile properties of paper in the z-direction
5. Calculation of the influence of carbonate concentration on the formation of fatty acid calcium soaps in pulp washing
6. The effect of cooking kappa number on oxygen delignification of eucalypt kraft pulp
7. Evaluation of the tensile stress-strain properties in the thickness direction of paper materials
8. The role of surface hydrophobicity in offset ink setting
9. Plug screw and Bivis treatment under pressurized conditions and subsequent LC refining
10. Effect of local curls on the cockling of paper
11. The effect of fiber charge enhanced by chemical oxidation on paper dry-tensile stiffness
12. Investigating the influence of pulp types on washing using a new measurement technique
13. Indirect polyelectrolyte titration of cellulosic fibers – Surface and bulk charges of cellulosic fibers
14. Adsorption of colloidal extractives and dissolved hemicelluloses on thermomechanical pulp fiber components studied by QCM-D
15. The influence of thickeners on the rheological properties of PCC suspensions and on the surface structure of PCC-based layers
16. Determination of the in-plane wetting of a board structure using NIR spectroscopy
17. Light-induced yellowing of mecanical and chemimecanical pulp sheets – influence of wood raw material, process and aging method
18. Refiner plate clash detection using an embedded force sensor
19. ToF-SIMS characterization of modified starch on fine and LWC base papers
20. Doctorial dissertations in the field of pulp and paper science and technology 2006