Spreading of droplets of different liquids on specially structured papers

Artikel in diesem Heft

1. Lightweight, high-opacity paper by fiber loading: filler comparison
2. An investigation of the friction properties of coated paper
3. Orientation of talc particles in dispersion coatings
4. A titration microcalorimetry study of the interactions between poly(vinyl alcohol) and coating colour minerals
5. Ozone-oxidized POTATO AMYLOPECTIN (PAP) starch as a cobinder in paper-coating: Impact on flow behaviour and coating layer properties
6. Two phase flows under the coating blade
7. Interactions between ground calcium carbonate pigments and polymer latices
8. Kinetics of the flocculation of clay particles by polyethylene oxide (PEO) at temperatures above the PEO-water cloud point temperature
9. Novel cofactors/PEO flocculation systems for colloidal suspensions
10. The role of surface polymer compability in the formation of fiber/fiber bonds in paper
11. Dendrimers: A new retention aid for newsprint, mechanical printing grades, and board
12. Distribution characteristics of rosin size and their effect on the internal sizing of paper
13. Influence of inertia on liquid absorption into paper coating structures
14. Influence of latex surface properties on interactions with starch and carboxymethyl cellulose in coating colours
15. The effect of charge density and hydrophobic modification on dextran-based paper strength enhancing polymers
16. The effect of recycling procedures of papermaking fibres and fines on the adsorption of cationic polyacrylamide
17. Mechanism of internal sizing by alkyl ketene dimers (AKD): The role of the spreading monolayer precursor and autophobicity
18. Surface and friction forces between cellulose surfaces measured with colloidal probe microscopy
19. Release of organic substances from bleached sulphate pulps during slushing and refining
20. Computer modelling of fluid permeation in porous coatings and paper – an overview
21. A method for measuring and controlling the pressure in the metering nip of a metering size press coating process
22. A model for the adsorption of polyelectrolytes on pulp fibers: Relation between fiber structure and polyelectrolyte properties
23. Apparent slip velocity of paper coatings in viscometric flows
24. Runnability and flow-induced aggregation of paper coating suspensions
25. Mechanism of polyacrylamide-bentonite – microparticulate retention aids
26. Studies on topochemical modification of cellulosic fibres
27. Separation of off-set ink components during absorption into pigment coating structures
28. Design and development of the micropolymer system: An “organic microparticle” retention/drainage system
29. Reversibility of polymer-induced fiber flocculation by shear. 1. Experimental methods
30. Droplet penetration into porous networks: Role of pore morphology
31. Pigmented latex coatings: Microstructure and viscoelastic mechanical properties
32. Flocculation of PCC induced by polymer/microparticle systems: Floc characteristics
33. Spectroscopic methods for determination of latex content of coating layers
34. Polyelectrolyte adsorption onto cellulose fibres – A review
35. Spreading of droplets of different liquids on specially structured papers
36. Effects of wood polysaccharides on pitch deposition