Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Characterization of surfaces of CTMP fibers using inverse gas chromatography combined with multivariate data analysis
-
Linda Börås
Veröffentlicht/Copyright:
1. November 2018
Abstract
The effect of CTMP fiber surface composition on interactions with various solvents was characterized using inverse gas chromatography, and the data obtained with this method was evaluated using multivariate data analysis. The amount of extractives was shown to have a major influence on the degree of interactions between fiber and solvents. There were also discemible effects of counter-ions to acidic groups and mild peroxide bleaching on surfaces. IGC combined with multivariate data analysis may be a useful tool in explaining variations in e.g. retention and sizing on the board machine.
Keywords: Mechanical pulps; Inverse gas chromatography; Fibers; Surfaces; Multivariate data analysis
Received: 1997-07-18
Accepted: 1997-11-01
Published Online: 2018-11-01
Published in Print: 1997-12-01
© 2018 by Walter de Gruyter Berlin/Boston
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Lamellar cracks, do they appear during radial compression of wood?
- Characterization of surfaces of CTMP fibers using inverse gas chromatography combined with multivariate data analysis
- Residual phase lignin in haft cooking related to the conditions in the cook
- Fibre characteristics and paper properties of formic acid / peroxyformic acid birch pulps
- Pulp washing: Influence of temperature on lignin leaching from kraft pulps
- Effect of headbox slice geometry during the stratified forming of woodfree paper
- Surface characterization of a rosin sizing agent in paper by means of EPMA, ESCA and TOF-SIMS
- The steady-state compressibility of saturated fibre webs at low pressures
- Dynamic simulation of a thermomechanical pulp refiner
- Identification of carton board qualities using gas chromatography or gas sensitive sensors in combination with multivariate data analysis
- Thermodynamic parameters governing the stereoselective degradation of arylglycerol-B-aryl ether bonds in milled wood lignin under kraft pulping conditions
- Calendering of coated paper and board in an extended soft nip
- List of dissertations in the field of pulp and paper 1996 (previously not published) and 1997
- Annual index for 1997
Schlagwörter für diesen Artikel
Mechanical pulps;
Inverse gas chromatography;
Fibers;
Surfaces;
Multivariate data analysis
Artikel in diesem Heft
- Lamellar cracks, do they appear during radial compression of wood?
- Characterization of surfaces of CTMP fibers using inverse gas chromatography combined with multivariate data analysis
- Residual phase lignin in haft cooking related to the conditions in the cook
- Fibre characteristics and paper properties of formic acid / peroxyformic acid birch pulps
- Pulp washing: Influence of temperature on lignin leaching from kraft pulps
- Effect of headbox slice geometry during the stratified forming of woodfree paper
- Surface characterization of a rosin sizing agent in paper by means of EPMA, ESCA and TOF-SIMS
- The steady-state compressibility of saturated fibre webs at low pressures
- Dynamic simulation of a thermomechanical pulp refiner
- Identification of carton board qualities using gas chromatography or gas sensitive sensors in combination with multivariate data analysis
- Thermodynamic parameters governing the stereoselective degradation of arylglycerol-B-aryl ether bonds in milled wood lignin under kraft pulping conditions
- Calendering of coated paper and board in an extended soft nip
- List of dissertations in the field of pulp and paper 1996 (previously not published) and 1997
- Annual index for 1997
