Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys
-
S. Suwas
,
K. Narasimha Rao
Abstract
Effect of annealing on textures resulting from different modes of rolling deformation has been studied in pure Cu, Cu(Cr) and Cu(P) alloys with a view to obtain a very fine-grained microstructure and very weak texture. The annealing textures of differently rolled materials are dependent on the mode of rolling employed prior to heat treatment. A good combination of uniform fine-grained microstructure with weak texture has been achieved by annealing the multi-step cross-rolled materials.
The authors are grateful to Ministry of Defence, Govt. of India for providing financial support to the research programme. We extend our thanks to Dr. D. Banerjee, Director, DMRL for his encouragement to carry out this work. Thanks are also due to the members of SFAG and MWG of DMRL for their help in carrying out the experimental work.
References
1 Hirsch, J.; Lücke, K.: Acta Metall. 36 (1988) 2863.10.1016/0001-6160(88)90172-1Suche in Google Scholar
2 Huh, M.Y.; Cho, S.Y.; Engler, O.: Mater. Sci. Eng. A 315 (2001) 35.10.1016/S0921-5093(01)01207-2Suche in Google Scholar
3 Suwas, S.; Singh, A.K.; Narasimha Rao, K.; Singh, T.: (Part I) Z. Metallkd. 93 (2002) 918.10.3139/146.020918Suche in Google Scholar
4 Lücke, K.; Hirsch, J., in: H.-J. Bunge (ed.): Directional Properties of Materials, DGM Informationsgesellschaft, Oberursel (1988) 85.Suche in Google Scholar
5 Bunge, H.-J.; Haessner, F.: J. Appl. Phys. 39 (1968) 5503.10.1063/1.1656003Suche in Google Scholar
6 Bunk, W.: Z. Metallkd. 56 (1965) 645 and 57 (1966) 345.Suche in Google Scholar
7 Ito, K.; Musick, R.; Lücke, K.: Acta Metall. 31 (1983) 2137.10.1016/0001-6160(83)90033-0Suche in Google Scholar
8 Grewen, J.: Z. Metallkd. 59 (1968) 236.Suche in Google Scholar
9 Ray, R.K.; Hutchinson, W.B.; Besag, F.M.C.; Smallman, R.E.: J. Microscopy 7 (1973) 217.10.1111/j.1365-2818.1973.tb03776.xSuche in Google Scholar
10 Grewen, J.: Z. Metallkd. 75 (1984) 657.Suche in Google Scholar
11 Wassermann, G.; Grewen, J.: Texturen metallischer Werkstoffe, Springer-Verlag, Berlin (1962).10.1007/978-3-662-13128-2Suche in Google Scholar
12 Noda, T.; Huber, J.: Z. Metallkd. 69 (1978) 570.Suche in Google Scholar
13 Ridha, A.A.; Hutchinson, W.B., in: Proc. of 6th Int Conf. on Texture of Materials (ICOTOM 6), Tokyo (1981) 112.Suche in Google Scholar
14 Ridha, A.A.; Hutchinson, W.B., Acta Metall. 30 (1982) 1929.10.1016/0001-6160(82)90033-5Suche in Google Scholar
15 Pospiech, J.; Lücke, K.: Z. Metallkd. 68 (1977) 571.Suche in Google Scholar
16 Stzwiertnia, K.; Haessner, F.: Mater. Sci. Forum 157–162 (1984) 1069.Suche in Google Scholar
© 2002 Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Editorial
- 2nd European Symposium on Nanomechanical Testing
- Articles/Aufsätze
- Finite element simulation of spherical indentation in the elastic –plastic transition
- Continuous FEM simulation of the nanoindentation
- Extracting hardness and Young’s modulus from load – displacement curves
- Nanoindentation around Vickers microindentation in MgO (100) crystal
- Development of a standard on hardness and Young’s modulus testing of thin coatings by nanoindentation
- Phase formation and reaction kinetics in M– In systems (M = Pt, Pd, Mn)
- Phase formation and reaction kinetics in M–Sn systems (M = Zr, Hf, Nb, Ta, Mo)
- Evaluation of the excess volume and density of liquid Al –Sr alloys
- Strength differential effect in SiCp reinforced Al composites
- Processing map for hot working of hot-rolled Mg-11.5Li-1.5Al-0.15Zr alloy
- Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys
- Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys
- Notifications/Mitteilungen
- Personal/Personelles
- DGM Training/DGM Fortbildung
- Conferences/Konferenzen
Artikel in diesem Heft
- Contents
- Editorial
- 2nd European Symposium on Nanomechanical Testing
- Articles/Aufsätze
- Finite element simulation of spherical indentation in the elastic –plastic transition
- Continuous FEM simulation of the nanoindentation
- Extracting hardness and Young’s modulus from load – displacement curves
- Nanoindentation around Vickers microindentation in MgO (100) crystal
- Development of a standard on hardness and Young’s modulus testing of thin coatings by nanoindentation
- Phase formation and reaction kinetics in M– In systems (M = Pt, Pd, Mn)
- Phase formation and reaction kinetics in M–Sn systems (M = Zr, Hf, Nb, Ta, Mo)
- Evaluation of the excess volume and density of liquid Al –Sr alloys
- Strength differential effect in SiCp reinforced Al composites
- Processing map for hot working of hot-rolled Mg-11.5Li-1.5Al-0.15Zr alloy
- Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys
- Effect of modes of rolling on evolution of the texture in pure copper and some copper-base alloys
- Notifications/Mitteilungen
- Personal/Personelles
- DGM Training/DGM Fortbildung
- Conferences/Konferenzen
