Contents

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. J. A. Biesenberger, G. Astarita, D. C. Bogue
5. Screw Extrusion/Mixing
6. Modeling Solids Conveying in Polymer Extruders
7. Comparison between LDPE Conventional and Autothermal Extrusion Characteristics
8. Transesterification of Ethylene Acetate Copolymer in a Twin Screw Extruder
9. Stabilising the Structure of HDPE by the Use of Highly-dispersed Mixture of Fe/FeO
10. Pumping Characteristics of an Intermeshing Co-rotating Twin Screw Extruder
11. Flow Behaviour of Blends of Poly(ethylene-Co-Acrylic Acid) and Epoxidised Natural Rubber
12. Die Extrusion
13. Rheological Behaviour of HDPE/PA 11 Blends
14. Melt Flow Properties of LDPE/HDPE Blends in Capillary Extrusion
15. Fibers and Film
16. Rheological Behaviour of LLDPE/LDPE Blends under Elongational Deformation
17. Processing/Structure Relationships of Mica-Filled PE-Films with Low Oxygen Permeability
18. On the Charge State of Melt-Blown Polymer Materials
19. Temperature Measuring in Plastics Processing with Infrared Radiation Thermometers
20. Comparative Study of Structure Development in Melt Spinning Polyolefin Fibers
21. Moulding
22. Sintering Rheology of Semi-Crystalline Polymers
23. Molding
24. Melt Flow Instabilities of Filled HDPE
25. Experimental Validation of Shrinkage Predictions for Injection Molded Products