Contents

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. Editorial
5. Screw Extrusion/Mixing
6. Melt Temperatures and Residence Times in an Extruder by Infrared Spectroscopy
7. Continuous Mixing of Low Viscosity and High Viscosity Polymer Melts in a Modular Co-Rotating Twin Screw Extruder
8. Flow Field Analysis of Both the Trilobal Element and Mixing Disc Zones within a Closely Intermeshing, Co-Rotating Twin-Screw Extruder
9. A Composite Model for Solid Conveying, Melting, Pressure and Fill Factor Profiles in Modular Co -Rotating Twin Screw Extruders
10. Temperature Rise in the Extrusion of Highly Viscous Composite Materials
11. Simulation of Free Surface Flow in Partially Filled Internal Mixers
12. Die Extrusion
13. Processing of Sheath-Core and Matrix-Fibril Fibers Composed of PP and a TLCP
14. Fibers and Films
15. Experimental and Theoretical Study of Rectangular Fiber Melt Spinning
16. Distributed Crystallinity Control during Cast Film Extrusion
17. Application of Neural Networks to Analyze the Drawing Process of PET Films
18. Molding
19. Physically-Based Adaptive Control of Cavity Pressure in Injection Molding: Filling Phase
20. In-Mould Shrinkage Measurements of PS Samples with Strain Gages
21. The Occurrence of Flow Marks during Injection Molding of Linear Polyethylene