Home Injection Molding of iPP
Article
Licensed
Unlicensed Requires Authentication

Injection Molding of iPP

An Integrated Experimental Investigation
  • M. Saiu , V. Brucato , S. Piccarolo and G. Titomanlio
Published/Copyright: May 27, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 7 Issue 3

Abstract

An experimental study of iPP injection molding is carried out. Pressure distribution during both filling and post filling stages, mass entering the mold during each stage of the process, morphology and crystallinity distribution of the final object are analysed. Interesting features are evidenced and discussed in relation to gate geometry and filling flow rate. Evidence of flow crystallization inside the cavity is also reported.

* Mail address: Prof. Dr. V. Brucato, Dipartimento di Ingegneria Chimica dei processi e dei Materiali, Viale delle Scienze, 90128 Palermo, Italy.
Received: 1991-12-17
Accepted: 1992-2-20
Published Online: 2013-05-27
Published in Print: 1992-09-01

© 1992, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Internal Mixers
  4. 3D Flow Field Analysis of a Banbury Mixer
  5. Modelling Twin Rotor Mixers and Extruders
  6. Continuous Mixing
  7. Compounding of Thermoplastic Elastomers using Organosilanes
  8. Mixing History on the Morphology and Properties of Thermoplastic/LCP Blends
  9. Film
  10. Real Time Video Techniques in the Analysis of Blown Film Instability
  11. Two-phase Simulation of Tubular Film Blowing of Crystalline Polymers
  12. Molding
  13. Finite Element Simulation of Plug-assist Forming
  14. In-cycle Deterministic and Stochastic Dynamics of Extrusion Blow Molding
  15. Injection Molding of iPP
  16. A Basic Study of Applicability of Regrind Polyethylene in Rotational Molding
https://doi.org/10.3139/217.920267

Articles in the same Issue

  1. Contents
  2. Contents
  3. Internal Mixers
  4. 3D Flow Field Analysis of a Banbury Mixer
  5. Modelling Twin Rotor Mixers and Extruders
  6. Continuous Mixing
  7. Compounding of Thermoplastic Elastomers using Organosilanes
  8. Mixing History on the Morphology and Properties of Thermoplastic/LCP Blends
  9. Film
  10. Real Time Video Techniques in the Analysis of Blown Film Instability
  11. Two-phase Simulation of Tubular Film Blowing of Crystalline Polymers
  12. Molding
  13. Finite Element Simulation of Plug-assist Forming
  14. In-cycle Deterministic and Stochastic Dynamics of Extrusion Blow Molding
  15. Injection Molding of iPP
  16. A Basic Study of Applicability of Regrind Polyethylene in Rotational Molding
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 22.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.920267/html?lang=en
Scroll to top button