Startseite Compounding of Thermoplastic Elastomers using Organosilanes
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Compounding of Thermoplastic Elastomers using Organosilanes

Formation of Disperse Structures
  • R. Anderlik und H.-G. Fritz
Veröffentlicht/Copyright: 27. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Polymer Processing
Aus der Zeitschrift International Polymer Processing Band 7 Heft 3

Abstract

To enhance the material properties of polypropylene/rubber blends the rubber phase is crosslinked. In this study an organosilane crosslinking system is used which creates stable Si-O-Si bonds between the rubber chains and produces a polyfunctional network structure with a high crosslinking density. This organosilane system allows in principle to prepare blends which are statically or dynamically crosslinked. Results concerning the morphology of blends prepared under different compounding parameters are presented. Particular attention was directed to the interrelationship of rheological properties of the blend components and the morphological structure of the created blends. In the closing chapter of this paper the material properties of blends, including EPM or EPDM in a silane-crosslinked mode are compared with those of only physically mixed PP/EPDM-blends.

* Mail address: Prof. Dr.-Ing. H.-G. Fritz, Institut für Kunststofftechnologie, Böblinger Strasse 70, 7000 Stuttgart 10, Germany.
Received: 1991-8
Accepted: 1991-11-13
Published Online: 2013-05-27
Published in Print: 1992-09-01

© 1992, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Internal Mixers
  4. 3D Flow Field Analysis of a Banbury Mixer
  5. Modelling Twin Rotor Mixers and Extruders
  6. Continuous Mixing
  7. Compounding of Thermoplastic Elastomers using Organosilanes
  8. Mixing History on the Morphology and Properties of Thermoplastic/LCP Blends
  9. Film
  10. Real Time Video Techniques in the Analysis of Blown Film Instability
  11. Two-phase Simulation of Tubular Film Blowing of Crystalline Polymers
  12. Molding
  13. Finite Element Simulation of Plug-assist Forming
  14. In-cycle Deterministic and Stochastic Dynamics of Extrusion Blow Molding
  15. Injection Molding of iPP
  16. A Basic Study of Applicability of Regrind Polyethylene in Rotational Molding
https://doi.org/10.3139/217.920212

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Internal Mixers
  4. 3D Flow Field Analysis of a Banbury Mixer
  5. Modelling Twin Rotor Mixers and Extruders
  6. Continuous Mixing
  7. Compounding of Thermoplastic Elastomers using Organosilanes
  8. Mixing History on the Morphology and Properties of Thermoplastic/LCP Blends
  9. Film
  10. Real Time Video Techniques in the Analysis of Blown Film Instability
  11. Two-phase Simulation of Tubular Film Blowing of Crystalline Polymers
  12. Molding
  13. Finite Element Simulation of Plug-assist Forming
  14. In-cycle Deterministic and Stochastic Dynamics of Extrusion Blow Molding
  15. Injection Molding of iPP
  16. A Basic Study of Applicability of Regrind Polyethylene in Rotational Molding
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 22.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/217.920212/html
Button zum nach oben scrollen