Article Open Access

Simulation-Based Approach for Probing Rheology-Processing-Structure Relationships in Foam Blow Molding

  • , , and
Published/Copyright: November 1, 2019
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 34 Issue 5

Received: 2019-01-27
Accepted: 2019-06-13
Published Online: 2019-11-01
Published in Print: 2019-11-21

© 2019, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review Article
  4. Influence of Processing Conditions on the Preparation of Clay-Based Nanocomposites by Twin-Screw Extrusion
  5. Regular Contributed Articles
  6. Roll-to-Roll Hot Embossing of High Aspect Ratio Micro Pillars for Superhydrophobic Applications
  7. Simulation-Based Approach for Probing Rheology-Processing-Structure Relationships in Foam Blow Molding
  8. Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement
  9. Flame Retardancy Effects on Intumescent Coatings with Vinyl Acetate Copolymers
  10. Preparation and Properties of Functionalized Lignin-Modified Polyvinyl Alcohol
  11. Study of Melt Spinning Processing Conditions for a Polyacrylonitrile Copolymer with a Water/Ethanol Mixture as a Plasticizer
  12. Enhancement of Injection Molding Consistency by Adjusting Velocity/Pressure Switching Time Based on Clamping Force
  13. Mechanical and Fracture Peculiarities of Polypropylene-Based Functionally Graded Materials Manufactured via Injection Molding
  14. PPS News
  15. PPS News
  16. Seikei Kakou Abstracts
  17. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3801
Creative Commons
BY 4.0

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review Article
  4. Influence of Processing Conditions on the Preparation of Clay-Based Nanocomposites by Twin-Screw Extrusion
  5. Regular Contributed Articles
  6. Roll-to-Roll Hot Embossing of High Aspect Ratio Micro Pillars for Superhydrophobic Applications
  7. Simulation-Based Approach for Probing Rheology-Processing-Structure Relationships in Foam Blow Molding
  8. Characterization of Anisotropic Properties of Hot Compacted Self-Reinforced Composites (SRCs) via Thermal Diffusivity Measurement
  9. Flame Retardancy Effects on Intumescent Coatings with Vinyl Acetate Copolymers
  10. Preparation and Properties of Functionalized Lignin-Modified Polyvinyl Alcohol
  11. Study of Melt Spinning Processing Conditions for a Polyacrylonitrile Copolymer with a Water/Ethanol Mixture as a Plasticizer
  12. Enhancement of Injection Molding Consistency by Adjusting Velocity/Pressure Switching Time Based on Clamping Force
  13. Mechanical and Fracture Peculiarities of Polypropylene-Based Functionally Graded Materials Manufactured via Injection Molding
  14. PPS News
  15. PPS News
  16. Seikei Kakou Abstracts
  17. Seikei-Kakou Abstracts
Downloaded on 5.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.3801/html
Scroll to top button