Mechanical and Fracture Peculiarities of Polypropylene-Based Functionally Graded Materials Manufactured via Injection Molding

References

Agarwal, B. D., Broutman, L. J.: Analysis and Performance of Fibre Composites, 2nd Ed., John Wiley & Sons, New York (1990)Search in Google Scholar

Altpeter, H., Bevis, M. J., Gomes, M. E., Cunha, A. M. and Reis, R. L. “Shear Controlled Orentation in Injection Moulding of Starch Based Blends Intended for Medical Applications”, Plast. Rubber Compos., 32, 173–181 (2003) 10.1179/146580103225001372Search in Google Scholar

Avcia, A., Arikan, H. and Akdemir, A., “Fracture Behavior of Glass Fiber Reinforced Polymer Composite”, Cem. Concr. Res., 34, 429–434 (2004) 10.1016/j.cemconres.2003.08.027Search in Google Scholar

Biron, M.: Thermoplastics and Thermoplastic Composites, Elsevier, Atlanta (2013) 10.1016/B978-1-4557-7898-0.00008-1Search in Google Scholar

Choobineh, F., Behrens, A., “Use of Intervals and Possibility Distribution in Economic Analysis”, The Journal of Operation Research Society, 43, 907–918 (1992) 10.2307/2583291Search in Google Scholar

Chow, W. S., Mohd Ishak, Z. A., “Mechanical, Morphological and Rheological Properties of Polyamide 6/Organo-Montmorillonite Nanocomposites”, eXPRESS Polym. Lett., 1, 77–83 (2007) 10.3144/expresspolymlett.2007.14Search in Google Scholar

Costantino, A., Pettarin, V., Viana, J., Pontes, A., Pouzada, A. and Frontini, P., “Polypropylene/Clay Nanocomposites Produced by Shear Controlled Orientation in Injection Moulding: Deformation and Fracture Properties”, J. Mech. Eng., 59, 697–704 (2013) 10.5545/sv-jme.2012.1002Search in Google Scholar

Fu, S. Y., Lauke, B., “Effects of Fiber Length and Fiber Orientation Distributions on the Tensile Strength of Short-Fiber-Reinforced Polymers”, Compos. Sci. Technol., 56, 1179–1190 (1996) 10.1016/S0266-3538(96)00072-3Search in Google Scholar

Fu, X., He, B. and Chen, X., “Effects of Compatibilizers on Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene”, J. Reinf. Plast. Compos.”, 29, (2010) 936–94910.1177/0731684409103954Search in Google Scholar

Funabashi, M., “Gradient Composites of Nickel Coated Carbon Fibre Filled Epoxy Resin Moulded under Centrifugal Force”, Composites Part A, 28, 731–737 (1997) 10.1016/S1359-835X(97)00016-XSearch in Google Scholar

Gangil, B., Patnaik, A., Kumar, A. and Kumar, M., “Investigations on Mechanical and Sliding Wear Behaviour of Short Fibre-Reinforced Vinylester-Based Homogenous and their Functionally Graded Composites”, Journal of Materials: Design and Applications, 226, 300–315 (2012) 10.1177/1464420712450956Search in Google Scholar

Hagstrand, P. O., Bonjour, F. and Manson, J. A. E., “The Influence of Void Content on the Structural Flexural Performance of Unidirectional Glass Fiber Reinforced Polypropylene Composites”, Composites: Part A, 36, 705–714 (2005) 10.1016/j.compositesa.2004.03.007Search in Google Scholar

He, B., Liu, H., Leng, J., Yang, B., Chen, X., FuJ. and Fu, Q., “Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene Composites and their Influence Factors”, J. Reinf. Plast. Compos., 30, 222–228 (2011) 10.1177/0731684410391513Search in Google Scholar

Ibar, J. P., “Rheomolding: A New Process to Mold Polymeric Materials”, Polym. Plast. Technol. Eng., 17, 11–44 (1981) 10.1080/03602558108067696Search in Google Scholar

Kalay, G., Bevis, M. J. “The Effect of Shear Controlled Orientation in Injection Moulding on the Mechanical Properties of an Aliphatic Polyketone”, Shell Research SA and British Technology Group, 415–430 (1996) 10.1002/(SICI)1099-0488(199702)35:3<415::AID-POLB2>3.0.CO;2-RSearch in Google Scholar

Karsli, N. G., Aytac, A. and Deniz, V., “Effects of Initial Fiber Length and Fiber Length Distribution on the Properties of Carbon-Fiber-Reinforced-Polypropylene Composites”, J. Reinf. Plast. Compos., 31, 1053–1060 (20129 10.1177/0731684412452678Search in Google Scholar

Khan, R., Khan, M., Zaman, H., Pervin, S., Khan, N., Sultana, S., Saha, M. and Mustafa, A. I., “Comparative Studies of Mechanical and Interfacial, Properties between Jute and E-Glass Fiber-Reinforced Polypropylene Composites”, J. Reinf. Plast. Compos., 29, 1078–1088 (2010) 10.1177/0731684409103148Search in Google Scholar

Khan, R. A., Khan, M. A., Sultana, S.Khan, M. N., Shubhra, Q. T. H. and Noor, F. G., “Mechanical, Degradation, and Interfacial Properties of Synthetic Degradable Fiber Reinforced Polypropylene Composites”, J. Reinf. Plast. Compos., 29, 466–476 (2010) 10.1177/0731684408100699Search in Google Scholar

Koizumi, M, “FGM Activities in Japan”, Composites Part B, 28, 1–4 (1997) 10.1016/S1359-8368(96)00016-9Search in Google Scholar

KumarK. S., Bhatnagar, N. and Ghosh, A. K., “Development of Long Glass Fiber Reinforced Polypropylene Composites: Mechanical and Morphological Characteristics”, J. Reinf. Plast. Compos., 26, 239–249 (2007) 10.1177/0731684407070040Search in Google Scholar

Lafranche, E., Krawczak, P., Ciolczyk, J. P. and Maugey, J., “Injection Moulding of Long Glass Fibre Reinforced Polyamide 6-6: Guidelines to Improve Flexural Properties”, eXPRESS Polym. Lett., 1, 456–466 (2007) 10.3144/expresspolymlett.2007.64Search in Google Scholar

Li, X. P., Zhao, G. Q. and Yang, C., “Effect of Mold Temperature on Motion Behavior of Short Glass Fibers in Injection Molding Process”, Int. J. Adv. Manuf. Technol.73, 639–645 (2014) 10.1007/s00170-014-5874-8Search in Google Scholar

Lu, H., Ouyang, C., Yan, X., Wang, J., Hua, G., Chung, R. and Li, D. Y., “Potential Application of Electron Work Function in Analyzing Fracture Toughness of Materials”, J. Mater. Sci. Technol., 33, 1128–1133 (2017) 10.1016/j.jmst.2017.05.001Search in Google Scholar

Manas, D., Manas, M., Gajzlerova, L., Ovsik, M., Kratky, P., Senkerik, V., Skrobak, A., Danek, M. and Manas., M., “Effect of Low Doses Beta Irradiation on Micromechanical Properties of Surface Layer of Injection Molded Polypropylene Composite”, Radiat. Phys. Chem., 114, 25–30 (2015) 10.1016/j.radphyschem.2015.04.022Search in Google Scholar

Mathurosemontri, S., Uawongsuwan, P., Nagai, S. and Hamada, H., “The Effect of Processing Parameter on Mechanical Properties of Short Glass Fiber Reinforced Polyoxymethylene Composite by Direct Fiber Feeding Injection Molding Process”, Energy Procedia, 89, 255–263 (2016) 10.1016/j.egypro.2016.05.033Search in Google Scholar

Narkis, M., Vaxman, A., “Quantitative Measurement of Fiber Orientation and Fracture, Void and Weld-Lines in Short Fiber Reinforced Thermoplastic Composites”, J. Thermoplast. Compos. Mater., 2, 307–318 (1989) 10.1177/089270578900200405Search in Google Scholar

Opricovic, S., Tzeng, G. H., “Extended VIKOR method in Comparison with Outranking Methods”, Eur. J. Oper. Res., 178, 514–529 (2007) 10.1016/j.ejor.2006.01.020Search in Google Scholar

Pedrazzoli, D., Pegoretti, A., “Expanded Graphite Nanoplatelets as Coupling Agents in Glass Fiber Reinforced Polypropylene Composites”, Composites: Part A, 66, 25–34 (2014) 10.1016/j.compositesa.2014.06.016Search in Google Scholar

Pegoretti, A., Ricco, T., “Fatigue Crack Propagation in Polypropylene Reinforced with Short Glass Fibers”, Compos. Sci. Technol., 59, 1055–1062 (1999) 10.1016/S0266-3538(98)00143-2Search in Google Scholar

Pegoretti, A., Ricco, T., “Fatigue Fracture of Net and Short Glass Fiber Reinforced Polypropylene: Effect of Frequency and Material Orientation”, J. Compos. Mater., 34, 1009–1027 (2000) 10.1177/002199830003401203Search in Google Scholar

Santulli, C., Brooks, R., Rudd, C. D. and Long, A. C., “Influence of Microstructural Voids on the Mechanical and Impact Properties in Commingled E-Glass/Polypropylene Thermoplastic Composites”, Journal of Materials: Design and Applications, 216, 85–100 (2002) 10.1177/146442070221600204Search in Google Scholar

Siddhartha, Patnaik, A. and Bhatt, A. D., “Friction and Wear Analysis of a Cement Kiln Dust Reinforced Epoxy-Based Functionally Graded Materials”, Journal of Engineering Tribology, 224, 1103–1114 (2010) 10.1243/13506501JET798Search in Google Scholar

Siddhartha, Patnaik, A. and Bhatt, A. D., “Mechanical and Dry Sliding Wear Characterization f Epoxy-TiO₂ Particulate Filled Functionally Graded Composites Materials Using Taguchi Design of Experiment”, Mater. Des., 32, 615–627 (2011) 10.1016/j.matdes.2010.08.011Search in Google Scholar

Siddhartha Singh, A. K., “Mechanical and Dry Sliding Wear Characterization of Short Glass Fiber Reinforced Polyester-Based Homogeneous and their Functionally Graded Composite Materials”, Journal of Materials: Design and Applications, 229, 272–298 (2015) 10.1177/1464420713511429Search in Google Scholar

Singh, A. K., Siddhartha, “A Novel Technique for Manufacturing Polypropylene Based Functionally Graded Materials”, Int. Polym. Proc., 33, 197–205 (2018) 10.3139/217.3449Search in Google Scholar

Singh, A. K., Siddhartha Gupta, P. and Singh, P. K., “Evaluation of Mechanical and Erosive wear Characteristics of TiO₂ and ZnO Filled Bi-Directional E-glass Fiber Based Vinyl Ester Composites”, Silicon, 10, 309–327 (2018) 10.1007/s12633-016-9447-3Search in Google Scholar

Singh, A. K., Vashishtha, S., “Mechanical and Tribological Peculiarity of Nano-TiO₂-Augmented, Polyester-Based Homogeneous Nanocomposites and their Functionally Graded Materials”, Adv. Polym. Tech., 37, 679–696 (2018) 10.1002/adv.21710Search in Google Scholar

Thomason, J. L., “The Influence of Fibre Length and Concentration on the Properties of Glass Fibre Reinforced Polypropylene: 5. Injection Moulded Long and Short Fibre PP”, Composites Part A, 33, 1641–1652 (2002) 10.1016/S1359-835X(02)00179-3Search in Google Scholar

Titomanlio, G., Piccarolo, S. and Marrucci, G., “Analysis of Void Formation in Extruded Bar”, Polym. Eng. Sci., 25, 91–97 (1985) 10.1002/pen.760250206Search in Google Scholar

Udupa, G., Rao, S. S. and Ganagadharan, K. V., “Functionally Graded Composite Materials: An Overview”, Procedia Mater. Sci., 5, 1291–1299 (2014) 10.1016/j.mspro.2014.07.442Search in Google Scholar

Vu-Khanh, T., Denault, J., Habib, P. and Low, A., “The Effects of Injection Molding on the Mechanical Behavior of Long-Fiber Reinforced PBT/PET Blends”, Compos. Sci. Technol., 40, 423–435 (1991) 10.1016/0266-3538(91)90032-KSearch in Google Scholar

Wan, T., Liao, S., Wang, K., Yan, P. and Clifford, M., “Multi-Scale Hybrid Polyamide 6 Composites Reinforced with Nano-Scale Clay and Micro-Scale Short Glass Fiber”, Composites Part A, 50, 31–38 (2013) 10.1016/j.compositesa.2013.03.009Search in Google Scholar

Xu, J., Wang, T., Zhang, S. and Tan, J., “Energy-Efficient Enhancement for Viscoelastic Injection Rheomolding Using Hierarchy Orthogonal Optimization”, Math. Prob. Eng., 70, 1–20, 201810.1155/2018/7054385Search in Google Scholar

Yang, J., Li, P., “Characterization of Short Glass Fiber Reinforced Polypropylene Foam Composites with the Effect of Compatibilizers: A Comparison”, J. Reinf. Plast. Compos., 34, 534–546 (2015) 10.1177/0731684415574142Search in Google Scholar

Yudhanto, A., Lubineau, G., Wafai, H., Mulle, M., Pulungan, D., Yaldiz, R. and Verghese, N., “Monotonic and Cyclic Responses of Impact Polypropylene and Continuous Glass Fiber-Reinforced Impact Polypropylene Composites at Different Strain Rates”, Polym. Test., 51, 93–100 (2016) 10.1016/j.polymertesting.2016.03.008Search in Google Scholar

Zhang, D., Heider, D. and GillespiJr., J. W., “Determination of Void Statistics and Statistical Representative Volume Elements in Carbon Fiber-Reinforced Thermoplastic Prepregs”, J. Thermopl. Compos. Mater., 30, 1103–1119 (2017) 10.1177/0892705715618002Search in Google Scholar

Zhang, X., Yang, H., Lin, Z. and Tan, S., “Polypropylene Hybrid Composites Filled by Wood Flour and Short Glass Fiber: Effect of Compatibilizer on Structure and Properties”, J. Thermoplast. Compos. Mater., 26, 16–29 (2013) 10.1177/0892705711417030Search in Google Scholar